添加Git临时调试模板分支

新增内容：
- LICENSE-Private-Demo 主规范文档
- LICENSE-Private-Demo_docs/ 完整文档套件
  - Word 格式规范说明书
  - PDF 格式规范说明书
  - TXT 格式规范说明书
  - 说明长图

编译更新：
- winboll/build.properties: buildCount 1→2
- libwinboll/build.properties: buildCount 1→2

.gitignore

@@ -97,9 +97,5 @@ lint-results.html
 ## WinBoLL 基础应用(避免上传敏感配置)
 /winboll.properties
 /local.properties
-
+/settings.gradle
-## WinBoLL 衍生应用，
+/gradle.properties
-## 外派类型类库应用需要注释掉以下部分，以便部署通用类库编译配置。
-## APPBase,AES需要上传以下两种配置。
-settings.gradle
-gradle.properties

LICENSE-Private-Demo

@@ -0,0 +1,97 @@
+# WinBoLL 源码 LICENSE-Private-Demo 规范说明书
+
+# LICENSE-Private-Demo
+
+# WinBoLL 源码公共转私有继承开发规范守则
+
+## 核心声明
+
+本文档**唯一核心设计目的**：通过文件标识、分支隔离、操作规范、责任界定四重约束，**从根源规避私有开发分支代码被人为合并、推送、提交至公共开源主流分支的风险**，明确人为操作失误、违规合并的全部责任归属，同时保证私有分支可正常同步、拉取公共主流分支的上游更新。
+
+## 一、文件宗旨与风险防控说明
+
+本文件为 WinBoLL 项目公共开源分支转为私有独立分支开发的**强制标准化操作手册与责任界定文件**，核心风控目标：
+
+1. 严格隔离公共开源分支与私有开发分支，通过授权文件标记实现分支属性一眼可辨，杜绝人为操作混淆
+
+2. **重点防控人为操作导致的私有分支代码违规合并、回合、推送至公共 ****`winboll`**** 主流分支**，从流程上封堵合并风险
+
+3. 明确所有开发提交者的操作责任，违规合并公共分支的行为由操作人承担全部代码泄露、合规风险
+
+4. 规范私有分支初始化全流程，保证私有分支仅可单向同步公共分支更新，禁止任何反向代码流入公共分支
+
+## 二、公私分支授权标识文件定义（风控核心依据）
+
+### 1. 公共开源分支唯一标识
+
+**文件名：LICENSE**
+
+- 仅允许存在于公共主流分支 `winboll` 及官方公共衍生分支
+
+- 标识当前分支为**开源公开可贡献分支**，遵循原开源授权协议
+
+- **严禁私有分支内保留、恢复此文件**，出现即判定分支属性异常
+
+### 2. 私有开发分支唯一标识
+
+**文件名：LICENSE-Private**
+
+- 仅允许存在于私有开发分支，**绝对禁止出现在公共 ****`winboll`**** 分支**
+
+- 标识当前分支为**私有闭源分支**，代码仅限内部使用，禁止公开、禁止对外贡献
+
+- 为本分支私有属性的法定判定依据，也是禁止合并至公共分支的核心标记
+
+## 三、分支管理与合并风控规则（强制遵守）
+
+1. **公共主流分支**：固定为 `winboll`，为项目唯一开源主线，仅保留 `LICENSE` 文件，**禁止接收任何私有分支的合并、提交、推送请求**。
+
+2. **私有开发分支**：统一从 `winboll` 分支检出，命名固定格式为 `private-demo-*`，与公共分支物理隔离。
+
+3. **核心合并风控铁则**
+
+    - 私有分支 → 公共分支：**永久禁止任何形式的合并、推送、PR 提交、代码回合，人为操作也绝不允许**
+
+    - 公共分支 → 私有分支：允许正常拉取、同步上游更新，不影响私有开发迭代
+
+4. 所有仓库提交者、合并操作者，均视为已阅读并完全认可本规则，**人为执行私有分支向公共分支的合并操作，由操作人承担全部代码泄露、合规违约、项目安全风险**。
+
+## 四、公共转私有标准化操作步骤（锁死合并风险）
+
+请严格按顺序执行，每一步均为风控必要环节，不可跳过、不可修改顺序。
+
+1. 基于公共主流分支 `winboll`，新建私有开发分支，严格使用 `private-demo-*` 命名，从名称上明确分支私有属性，避免人为混淆。
+
+2. 本地仓库切换至新建私有分支，确认当前分支名称、检出来源无误。
+
+3. **永久删除项目根目录公共授权文件 ****`LICENSE`**，彻底移除公共分支标识，断绝误合并的标识漏洞。
+
+4. 将本规范文件 `LICENSE-Private-Demo` 复制并重命名为 `LICENSE-Private`，作为私有分支生效授权文件。
+
+5. 将以上所有变更执行一次性 Git 提交，**提交信息必须固定使用以下内容，不可修改**：
+
+    > 初始化私有开发分支，已切换私有授权文件，本分支禁止任何人为合并、推送至 winboll 公共分支
+    > 
+    > 
+
+6. 提交完成后，本分支正式转为私有开发状态，后续所有代码提交、分支合并、版本迭代，均严禁指向公共 `winboll` 分支。
+
+## 五、人为操作责任界定（核心补充条款）
+
+1. 本分支所有开发者、代码提交者、分支合并操作者，均视为**完全知晓本分支的私有属性与合并禁令**，自愿遵守本规范全部约束。
+
+2. **无论故意或过失，凡是人为执行私有分支向公共 ****`winboll`**** 分支的合并、推送、PR 提交、代码回合操作，全部责任由执行操作的本人独立承担**，项目方不承担任何因人为违规操作导致的代码泄露、开源合规、版本污染风险。
+
+3. 仓库管理员需严格校验合并请求的分支标识与授权文件，发现带有 `LICENSE-Private` 标记的分支申请合并至公共分支，一律直接拒绝，并记录操作人信息。
+
+4. 分支属性校验以根目录授权文件为唯一标准：只要分支内存在 `LICENSE-Private` 文件，就绝对禁止向公共分支发起任何合并操作。
+
+## 六、分支状态校验与异常处理
+
+- 合规公共分支：仅存在 `LICENSE`，无 `LICENSE-Private`
+
+- 合规私有分支：仅存在 `LICENSE-Private`，无 `LICENSE`
+
+- 异常状态：两个文件同时存在 / 均不存在 → 立即停止开发与提交，按本规范重置分支状态，严禁执行任何合并操作
+
+> （注：文档部分内容可能由 AI 生成）

LICENSE-Private-Demo_docs/LICENSE-Private-Demo

@@ -0,0 +1,97 @@
+# WinBoLL 源码 LICENSE-Private-Demo 规范说明书
+
+# LICENSE-Private-Demo
+
+# WinBoLL 源码公共转私有继承开发规范守则
+
+## 核心声明
+
+本文档**唯一核心设计目的**：通过文件标识、分支隔离、操作规范、责任界定四重约束，**从根源规避私有开发分支代码被人为合并、推送、提交至公共开源主流分支的风险**，明确人为操作失误、违规合并的全部责任归属，同时保证私有分支可正常同步、拉取公共主流分支的上游更新。
+
+## 一、文件宗旨与风险防控说明
+
+本文件为 WinBoLL 项目公共开源分支转为私有独立分支开发的**强制标准化操作手册与责任界定文件**，核心风控目标：
+
+1. 严格隔离公共开源分支与私有开发分支，通过授权文件标记实现分支属性一眼可辨，杜绝人为操作混淆
+
+2. **重点防控人为操作导致的私有分支代码违规合并、回合、推送至公共 ****`winboll`**** 主流分支**，从流程上封堵合并风险
+
+3. 明确所有开发提交者的操作责任，违规合并公共分支的行为由操作人承担全部代码泄露、合规风险
+
+4. 规范私有分支初始化全流程，保证私有分支仅可单向同步公共分支更新，禁止任何反向代码流入公共分支
+
+## 二、公私分支授权标识文件定义（风控核心依据）
+
+### 1. 公共开源分支唯一标识
+
+**文件名：LICENSE**
+
+- 仅允许存在于公共主流分支 `winboll` 及官方公共衍生分支
+
+- 标识当前分支为**开源公开可贡献分支**，遵循原开源授权协议
+
+- **严禁私有分支内保留、恢复此文件**，出现即判定分支属性异常
+
+### 2. 私有开发分支唯一标识
+
+**文件名：LICENSE-Private**
+
+- 仅允许存在于私有开发分支，**绝对禁止出现在公共 ****`winboll`**** 分支**
+
+- 标识当前分支为**私有闭源分支**，代码仅限内部使用，禁止公开、禁止对外贡献
+
+- 为本分支私有属性的法定判定依据，也是禁止合并至公共分支的核心标记
+
+## 三、分支管理与合并风控规则（强制遵守）
+
+1. **公共主流分支**：固定为 `winboll`，为项目唯一开源主线，仅保留 `LICENSE` 文件，**禁止接收任何私有分支的合并、提交、推送请求**。
+
+2. **私有开发分支**：统一从 `winboll` 分支检出，命名固定格式为 `private-demo-*`，与公共分支物理隔离。
+
+3. **核心合并风控铁则**
+
+    - 私有分支 → 公共分支：**永久禁止任何形式的合并、推送、PR 提交、代码回合，人为操作也绝不允许**
+
+    - 公共分支 → 私有分支：允许正常拉取、同步上游更新，不影响私有开发迭代
+
+4. 所有仓库提交者、合并操作者，均视为已阅读并完全认可本规则，**人为执行私有分支向公共分支的合并操作，由操作人承担全部代码泄露、合规违约、项目安全风险**。
+
+## 四、公共转私有标准化操作步骤（锁死合并风险）
+
+请严格按顺序执行，每一步均为风控必要环节，不可跳过、不可修改顺序。
+
+1. 基于公共主流分支 `winboll`，新建私有开发分支，严格使用 `private-demo-*` 命名，从名称上明确分支私有属性，避免人为混淆。
+
+2. 本地仓库切换至新建私有分支，确认当前分支名称、检出来源无误。
+
+3. **永久删除项目根目录公共授权文件 ****`LICENSE`**，彻底移除公共分支标识，断绝误合并的标识漏洞。
+
+4. 将本规范文件 `LICENSE-Private-Demo` 复制并重命名为 `LICENSE-Private`，作为私有分支生效授权文件。
+
+5. 将以上所有变更执行一次性 Git 提交，**提交信息必须固定使用以下内容，不可修改**：
+
+    > 初始化私有开发分支，已切换私有授权文件，本分支禁止任何人为合并、推送至 winboll 公共分支
+    > 
+    > 
+
+6. 提交完成后，本分支正式转为私有开发状态，后续所有代码提交、分支合并、版本迭代，均严禁指向公共 `winboll` 分支。
+
+## 五、人为操作责任界定（核心补充条款）
+
+1. 本分支所有开发者、代码提交者、分支合并操作者，均视为**完全知晓本分支的私有属性与合并禁令**，自愿遵守本规范全部约束。
+
+2. **无论故意或过失，凡是人为执行私有分支向公共 ****`winboll`**** 分支的合并、推送、PR 提交、代码回合操作，全部责任由执行操作的本人独立承担**，项目方不承担任何因人为违规操作导致的代码泄露、开源合规、版本污染风险。
+
+3. 仓库管理员需严格校验合并请求的分支标识与授权文件，发现带有 `LICENSE-Private` 标记的分支申请合并至公共分支，一律直接拒绝，并记录操作人信息。
+
+4. 分支属性校验以根目录授权文件为唯一标准：只要分支内存在 `LICENSE-Private` 文件，就绝对禁止向公共分支发起任何合并操作。
+
+## 六、分支状态校验与异常处理
+
+- 合规公共分支：仅存在 `LICENSE`，无 `LICENSE-Private`
+
+- 合规私有分支：仅存在 `LICENSE-Private`，无 `LICENSE`
+
+- 异常状态：两个文件同时存在 / 均不存在 → 立即停止开发与提交，按本规范重置分支状态，严禁执行任何合并操作
+
+> （注：文档部分内容可能由 AI 生成）

LICENSE-Private-Demo_docs/WinBoLL_源码_LICENSE-Private-Demo_规范说明书.txt

@@ -0,0 +1,97 @@
+# WinBoLL 源码 LICENSE\-Private\-Demo 规范说明书
+
+# LICENSE\-Private\-Demo
+
+# WinBoLL 源码公共转私有继承开发规范守则
+
+## 核心声明
+
+本文档**唯一核心设计目的**：通过文件标识、分支隔离、操作规范、责任界定四重约束，**从根源规避私有开发分支代码被人为合并、推送、提交至公共开源主流分支的风险**，明确人为操作失误、违规合并的全部责任归属，同时保证私有分支可正常同步、拉取公共主流分支的上游更新。
+
+## 一、文件宗旨与风险防控说明
+
+本文件为 WinBoLL 项目公共开源分支转为私有独立分支开发的**强制标准化操作手册与责任界定文件**，核心风控目标：
+
+1. 严格隔离公共开源分支与私有开发分支，通过授权文件标记实现分支属性一眼可辨，杜绝人为操作混淆
+
+2. **重点防控人为操作导致的私有分支代码违规合并、回合、推送至公共 ****`winboll`**** 主流分支**，从流程上封堵合并风险
+
+3. 明确所有开发提交者的操作责任，违规合并公共分支的行为由操作人承担全部代码泄露、合规风险
+
+4. 规范私有分支初始化全流程，保证私有分支仅可单向同步公共分支更新，禁止任何反向代码流入公共分支
+
+## 二、公私分支授权标识文件定义（风控核心依据）
+
+### 1\. 公共开源分支唯一标识
+
+**文件名：LICENSE**
+
+- 仅允许存在于公共主流分支 `winboll` 及官方公共衍生分支
+
+- 标识当前分支为**开源公开可贡献分支**，遵循原开源授权协议
+
+- **严禁私有分支内保留、恢复此文件**，出现即判定分支属性异常
+
+### 2\. 私有开发分支唯一标识
+
+**文件名：LICENSE\-Private**
+
+- 仅允许存在于私有开发分支，**绝对禁止出现在公共 ****`winboll`**** 分支**
+
+- 标识当前分支为**私有闭源分支**，代码仅限内部使用，禁止公开、禁止对外贡献
+
+- 为本分支私有属性的法定判定依据，也是禁止合并至公共分支的核心标记
+
+## 三、分支管理与合并风控规则（强制遵守）
+
+1. **公共主流分支**：固定为 `winboll`，为项目唯一开源主线，仅保留 `LICENSE` 文件，**禁止接收任何私有分支的合并、提交、推送请求**。
+
+2. **私有开发分支**：统一从 `winboll` 分支检出，命名固定格式为 `private\-demo\-\*`，与公共分支物理隔离。
+
+3. **核心合并风控铁则**
+
+    - 私有分支 → 公共分支：**永久禁止任何形式的合并、推送、PR 提交、代码回合，人为操作也绝不允许**
+
+    - 公共分支 → 私有分支：允许正常拉取、同步上游更新，不影响私有开发迭代
+
+4. 所有仓库提交者、合并操作者，均视为已阅读并完全认可本规则，**人为执行私有分支向公共分支的合并操作，由操作人承担全部代码泄露、合规违约、项目安全风险**。
+
+## 四、公共转私有标准化操作步骤（锁死合并风险）
+
+请严格按顺序执行，每一步均为风控必要环节，不可跳过、不可修改顺序。
+
+1. 基于公共主流分支 `winboll`，新建私有开发分支，严格使用 `private\-demo\-\*` 命名，从名称上明确分支私有属性，避免人为混淆。
+
+2. 本地仓库切换至新建私有分支，确认当前分支名称、检出来源无误。
+
+3. **永久删除项目根目录公共授权文件 ****`LICENSE`**，彻底移除公共分支标识，断绝误合并的标识漏洞。
+
+4. 将本规范文件 `LICENSE\-Private\-Demo` 复制并重命名为 `LICENSE\-Private`，作为私有分支生效授权文件。
+
+5. 将以上所有变更执行一次性 Git 提交，**提交信息必须固定使用以下内容，不可修改**：
+
+    > 初始化私有开发分支，已切换私有授权文件，本分支禁止任何人为合并、推送至 winboll 公共分支
+    > 
+    > 
+
+6. 提交完成后，本分支正式转为私有开发状态，后续所有代码提交、分支合并、版本迭代，均严禁指向公共 `winboll` 分支。
+
+## 五、人为操作责任界定（核心补充条款）
+
+1. 本分支所有开发者、代码提交者、分支合并操作者，均视为**完全知晓本分支的私有属性与合并禁令**，自愿遵守本规范全部约束。
+
+2. **无论故意或过失，凡是人为执行私有分支向公共 ****`winboll`**** 分支的合并、推送、PR 提交、代码回合操作，全部责任由执行操作的本人独立承担**，项目方不承担任何因人为违规操作导致的代码泄露、开源合规、版本污染风险。
+
+3. 仓库管理员需严格校验合并请求的分支标识与授权文件，发现带有 `LICENSE\-Private` 标记的分支申请合并至公共分支，一律直接拒绝，并记录操作人信息。
+
+4. 分支属性校验以根目录授权文件为唯一标准：只要分支内存在 `LICENSE\-Private` 文件，就绝对禁止向公共分支发起任何合并操作。
+
+## 六、分支状态校验与异常处理
+
+- 合规公共分支：仅存在 `LICENSE`，无 `LICENSE\-Private`
+
+- 合规私有分支：仅存在 `LICENSE\-Private`，无 `LICENSE`
+
+- 异常状态：两个文件同时存在 / 均不存在 → 立即停止开发与提交，按本规范重置分支状态，严禁执行任何合并操作
+
+> （注：文档部分内容可能由 AI 生成）

aes/build.gradle

@@ -24,13 +24,13 @@ android {
 	
     defaultConfig {
         applicationId "cc.winboll.studio.aes"
-        minSdkVersion 21
+        minSdkVersion 26
         targetSdkVersion 30
         versionCode 1
         // versionName 更新后需要手动设置 
         // 项目模块目录的 build.gradle 文件的 stageCount=0
         // Gradle编译环境下合起来的 versionName 就是 "${versionName}.0"
-        versionName "15.15" 
+        versionName "15.20" 
         if(true) {
             versionName = genVersionName("${versionName}")
         }

aes/build.properties

@@ -1,8 +1,8 @@
 #Created by .winboll/winboll_app_build.gradle
-#Sat Apr 25 04:16:42 HKT 2026
+#Tue May 12 13:11:28 HKT 2026
-stageCount=10
+stageCount=4
 libraryProject=libaes
-baseVersion=15.15
+baseVersion=15.20
-publishVersion=15.15.9
+publishVersion=15.20.3
 buildCount=0
-baseBetaVersion=15.15.10
+baseBetaVersion=15.20.4

aes/src/main/res/values-night/styles.xml

@@ -0,0 +1,16 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources>
+    <style name="MyAESTheme" parent="AESTheme">
+        <item name="themeDebug">@style/MyDebugActivityTheme</item>
+    </style>
+
+    <style name="MyDebugActivityTheme" parent="Theme.AppCompat.NoActionBar">
+        <item name="android:statusBarColor">@color/toolbarBackgroundColor</item>
+        <item name="colorTittle">@color/mainWindowTextColor</item>
+        <item name="colorTittleBackgound">@color/toolbarBackgroundColor</item>
+        <item name="colorText">@color/debugTextColor</item>
+        <item name="colorTextBackgound">@color/mainWindowBackgroundColor</item>
+        <item name="debugTextColor">@color/debugTextColor</item>
+        <item name="toolbarTextColor">@color/toolbarTextColor</item>
+    </style>
+</resources>

aes/src/main/res/values/styles.xml

@@ -1,5 +1,16 @@
 <?xml version="1.0" encoding="utf-8"?>
 <resources>
     <style name="MyAESTheme" parent="AESTheme">
+        <item name="themeDebug">@style/MyDebugActivityTheme</item>
     </style>
-</resources>
+
+    <style name="MyDebugActivityTheme" parent="Theme.AppCompat.Light.NoActionBar">
+        <item name="android:statusBarColor">@color/toolbarBackgroundColor</item>
+        <item name="colorTittle">@color/mainWindowTextColor</item>
+        <item name="colorTittleBackgound">@color/toolbarBackgroundColor</item>
+        <item name="colorText">@color/debugTextColor</item>
+        <item name="colorTextBackgound">@color/mainWindowBackgroundColor</item>
+        <item name="debugTextColor">@color/debugTextColor</item>
+        <item name="toolbarTextColor">@color/toolbarTextColor</item>
+    </style>
+</resources>

appbase/.gitignore

@@ -0,0 +1 @@
+/build

appbase/README.md

@@ -0,0 +1,36 @@
+# APPBase
+[![](https://jitpack.io/v/ZhanGSKen/APPBase.svg)](https://jitpack.io/#ZhanGSKen/APPBase)
+
+#### 介绍
+WinBoLL 安卓手机端安卓应用开发基础类库。
+
+#### 软件架构
+适配安卓应用 [AIDE Pro] 的 Gradle 编译结构。
+也适配安卓应用 [AndroidIDE] 的 Gradle 编译结构。
+
+
+#### Gradle 编译说明
+调试版编译命令 ：gradle assembleBetaDebug
+阶段版编译命令 ：bash .winboll/bashPublishAPKAddTag.sh appbase
+阶段版类库发布命令 ：git pull &&bash .winboll/bashPublishLIBAddTag.sh libappbase
+
+#### 使用说明
+
+#### 参与贡献
+
+1.  Fork 本仓库
+2.  新建 Feat_xxx 分支
+3.  提交代码 : ZhanGSKen(ZhanGSKen<zhangsken@188.com>)
+4.  新建 Pull Request
+
+
+#### 特技
+
+1.  使用 Readme\_XXX.md 来支持不同的语言，例如 Readme\_en.md, Readme\_zh.md
+2.  Gitee 官方博客 [blog.gitee.com](https://blog.gitee.com)
+3.  你可以 [https://gitee.com/explore](https://gitee.com/explore) 这个地址来了解 Gitee 上的优秀开源项目
+4.  [GVP](https://gitee.com/gvp) 全称是 Gitee 最有价值开源项目，是综合评定出的优秀开源项目
+5.  Gitee 官方提供的使用手册 [https://gitee.com/help](https://gitee.com/help)
+6.  Gitee 封面人物是一档用来展示 Gitee 会员风采的栏目 [https://gitee.com/gitee-stars/](https://gitee.com/gitee-stars/)
+
+#### 参考文档

appbase/app_update_description.txt

@@ -0,0 +1 @@
+

appbase/build.gradle

@@ -0,0 +1,50 @@
+apply plugin: 'com.android.application'
+apply from: '../.winboll/winboll_app_build.gradle'
+apply from: '../.winboll/winboll_lint_build.gradle'
+
+def genVersionName(def versionName){
+    // 检查编译标志位配置
+    assert (winbollBuildProps['stageCount'] != null)
+    assert (winbollBuildProps['baseVersion'] != null)
+    // 保存基础版本号
+    winbollBuildProps.setProperty("baseVersion", "${versionName}");
+    //保存编译标志配置
+    FileOutputStream fos = new FileOutputStream(winbollBuildPropsFile)
+    winbollBuildProps.store(fos, "${winbollBuildPropsDesc}");
+    fos.close();
+    
+    // 返回编译版本号
+    return "${versionName}." + winbollBuildProps['stageCount']
+}
+
+android {
+	// 适配MIUI12
+	compileSdkVersion 30
+    buildToolsVersion "30.0.3"
+	
+    defaultConfig {
+        applicationId "cc.winboll.studio.appbase"
+        minSdkVersion 26
+        targetSdkVersion 30
+        versionCode 1
+        // versionName 更新后需要手动设置 
+        // .winboll/winbollBuildProps.properties 文件的 stageCount=0
+        // Gradle编译环境下合起来的 versionName 就是 "${versionName}.0"
+        versionName "15.20"
+        if(true) {
+            versionName = genVersionName("${versionName}")
+        }
+    }
+	
+     // 确保 Java 7 兼容性（已适配项目技术栈）
+     compileOptions {
+         sourceCompatibility JavaVersion.VERSION_1_7
+         targetCompatibility JavaVersion.VERSION_1_7
+     }
+}
+
+dependencies {
+    api project(':libappbase')
+
+    api fileTree(dir: 'libs', include: ['*.jar'])
+}

appbase/build.properties

@@ -0,0 +1,8 @@
+#Created by .winboll/winboll_app_build.gradle
+#Tue May 12 09:17:15 HKT 2026
+stageCount=10
+libraryProject=libappbase
+baseVersion=15.20
+publishVersion=15.20.9
+buildCount=0
+baseBetaVersion=15.20.10

appbase/proguard-rules.pro

@@ -0,0 +1,126 @@
+# Add project specific ProGuard rules here.
+# By default, the flags in this file are appended to flags specified
+# in C:\tools\adt-bundle-windows-x86_64-20131030\sdk/tools/proguard/proguard-android.txt
+# You can edit the include path and order by changing the proguardFiles
+# directive in build.gradle.
+#
+# For more details, see
+#   http://developer.android.com/guide/developing/tools/proguard.html
+
+# Add any project specific keep options here:
+
+# If your project uses WebView with JS, uncomment the following
+# and specify the fully qualified class name to the JavaScript interface
+# class:
+#-keepclassmembers class fqcn.of.javascript.interface.for.webview {
+#   public *;
+#}
+
+# ============================== 基础通用规则 ==============================
+# 保留系统组件
+-keep public class * extends android.app.Activity
+-keep public class * extends android.app.Service
+-keep public class * extends android.content.BroadcastReceiver
+-keep public class * extends android.content.ContentProvider
+-keep public class * extends android.app.backup.BackupAgentHelper
+-keep public class * extends android.preference.Preference
+
+# 保留 WinBoLL 核心包及子类（适配你的两个包名）
+#-keep public class * extends com.winboll.WinBoLLActivity
+#-keep public class * extends com.winboll.WinBoLLFragment
+# 主包名
+-keep class cc.winboll.studio.*.** { *; }
+# beta包名
+-keep class cc.winboll.studio.*.beta.** { *; }
+-keepclassmembers class cc.winboll.studio.*.** { *; }
+-keepclassmembers class cc.winboll.studio.*.beta.** { *; }
+
+# 保留所有类中的 public static final String TAG 字段
+-keepclassmembers class * {
+    public static final java.lang.String TAG;
+}
+
+# 保留序列化类
+-keep class * implements android.os.Parcelable {
+    public static final android.os.Parcelable$Creator *;
+}
+-keepclassmembers class * implements java.io.Serializable {
+    static final long serialVersionUID;
+    private static final java.io.ObjectStreamField[] serialPersistentFields;
+    private void writeObject(java.io.ObjectOutputStream);
+    private void readObject(java.io.ObjectInputStream);
+    java.lang.Object writeReplace();
+    java.lang.Object readResolve();
+}
+
+# 保留 R 文件
+-keepclassmembers class **.R$* {
+    public static <fields>;
+}
+
+# 保留 native 方法
+-keepclasseswithmembernames class * {
+    native <methods>;
+}
+
+# 保留注解和泛型
+-keepattributes *Annotation*
+-keepattributes Signature
+
+# 屏蔽 Java 8+ 警告（适配 Java 7）
+-dontwarn java.lang.invoke.*
+-dontwarn android.support.v8.renderscript.*
+-dontwarn java.util.function.**
+
+# ============================== 第三方框架规则 ==============================
+# Retrofit + OkHttp
+-keep class retrofit2.** { *; }
+-keep interface retrofit2.** { *; }
+-keep class okhttp3.** { *; }
+-keep interface okhttp3.** { *; }
+-keep class okio.** { *; }
+-keepclasseswithmembers class * {
+    @retrofit2.http.* <methods>;
+}
+
+# Glide 4.x
+-keep public class * implements com.bumptech.glide.module.GlideModule
+-keep public class * extends com.bumptech.glide.module.AppGlideModule
+-keep public enum com.bumptech.glide.load.ImageHeaderParser$ImageType {
+    **[] $VALUES;
+    public *;
+}
+-dontwarn com.bumptech.glide.load.resource.bitmap.VideoDecoder
+
+# GreenDAO 3.x
+-keepclassmembers class * extends org.greenrobot.greendao.AbstractDao {
+    public static java.lang.String TABLENAME;
+}
+-keep class **$Properties
+# 实体类包名（按实际调整）
+#-keep class cc.winboll.studio.appbase.model.** { *; }
+
+# ButterKnife 8.x
+-keep class butterknife.** { *; }
+-dontwarn butterknife.internal.**
+-keep class **$$ViewBinder { *; }
+-keepclasseswithmembernames class * {
+    @butterknife.BindView <fields>;
+    @butterknife.OnClick <methods>;
+}
+
+# EventBus 3.x
+-keepclassmembers class ** {
+    @org.greenrobot.eventbus.Subscribe <methods>;
+}
+-keep enum org.greenrobot.eventbus.ThreadMode { *; }
+
+# ============================== 优化与调试 ==============================
+-optimizations !code/simplification/arithmetic,!code/simplification/cast,!field/*,!class/merging/*
+-optimizationpasses 5
+-verbose
+-dontpreverify
+-dontusemixedcaseclassnames
+# 保留行号（便于崩溃定位）
+-keepattributes SourceFile,LineNumberTable
+

appbase/src/beta/AndroidManifest.xml

@@ -0,0 +1,14 @@
+<?xml version="1.0" encoding="utf-8"?>
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    xmlns:tools="http://schemas.android.com/tools" >
+
+    <application
+		tools:replace="android:icon"
+        android:icon="@drawable/ic_winboll_beta">
+
+        <!-- Put flavor specific code here -->
+
+    </application>
+
+</manifest>
+

appbase/src/beta/res/values/strings.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources>
+
+    <string name="app_name">APPBase+</string>
+
+</resources>

appbase/src/main/AndroidManifest.xml

@@ -0,0 +1,57 @@
+<?xml version='1.0' encoding='utf-8'?>
+<manifest
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    package="cc.winboll.studio.appbase">
+
+    <application
+        android:name=".App"
+        android:icon="@drawable/ic_winboll"
+        android:label="@string/app_name"
+        android:theme="@style/MyAPPBaseTheme"
+        android:resizeableActivity="true"
+        android:process=":App"
+        android:sharedUserId="@string/shared_user_id"
+        android:sharedUserLabel="@string/shared_user_label">
+
+        <activity
+            android:name=".MainActivity"
+            android:label="@string/app_name"
+            android:exported="true"
+            android:resizeableActivity="true"
+            android:launchMode="singleTop"
+            android:configChanges="screenSize|smallestScreenSize|screenLayout|orientation">
+
+            <intent-filter>
+                <action android:name="android.intent.action.MAIN"/>
+                <category android:name="android.intent.category.LAUNCHER"/>
+                <category android:name="android.intent.category.DEFAULT"/>
+            </intent-filter>
+
+        </activity>
+
+
+
+        <activity
+            android:name=".Main2Activity"
+            android:label="@string/app_name"
+            android:exported="true"
+            android:resizeableActivity="true"
+            android:launchMode="singleTop"
+            android:taskAffinity="cc.winboll.studio.appbase.Main2Activity"
+            android:configChanges="screenSize|smallestScreenSize|screenLayout|orientation">
+
+        </activity>
+
+        <activity android:name=".GlobalApplication$CrashActivity"/>
+
+        <meta-data
+            android:name="android.max_aspect"
+            android:value="4.0"/>
+
+        <activity android:name="cc.winboll.studio.libappbase.activities.CrashCopyReceiverActivity"/>
+
+        <activity android:name=".AboutActivity"/>
+
+    </application>
+
+</manifest>

appbase/src/main/java/cc/winboll/studio/appbase/AboutActivity.java

@@ -0,0 +1,50 @@
+package cc.winboll.studio.appbase;
+
+import android.app.Activity;
+import android.os.Bundle;
+import android.view.View;
+import android.widget.Toolbar;
+import cc.winboll.studio.appbase.R;
+import cc.winboll.studio.libappbase.LogUtils;
+import cc.winboll.studio.libappbase.models.APPInfo;
+import cc.winboll.studio.libappbase.views.AboutView;
+
+/**
+ * @Author 豆包&ZhanGSKen<zhangsken@qq.com>
+ * @Date 2026/01/11 12:55
+ * @Describe AboutActivity
+ */
+public class AboutActivity extends Activity {
+
+    public static final String TAG = "AboutActivity";
+
+    @Override
+    protected void onCreate(Bundle savedInstanceState) {
+        super.onCreate(savedInstanceState);
+        setContentView(R.layout.activity_about);
+
+        Toolbar toolbar = findViewById(R.id.toolbar);
+        setActionBar(toolbar);
+
+		AboutView aboutView = findViewById(R.id.aboutview);
+		aboutView.setAPPInfo(genDefaultAppInfo());
+    }
+
+	private APPInfo genDefaultAppInfo() {
+        LogUtils.d(TAG, "genDefaultAppInfo() 调用");
+        String branchName = "appbase";
+        APPInfo appInfo = new APPInfo();
+        appInfo.setAppName("APPBase");
+        appInfo.setAppIcon(R.drawable.ic_winboll);
+        appInfo.setAppDescription(getString(R.string.app_description));
+        appInfo.setAppGitName("WinBoLL");
+        appInfo.setAppGitOwner("Studio");
+        appInfo.setAppGitAPPBranch(branchName);
+        appInfo.setAppGitAPPSubProjectFolder(branchName);
+        appInfo.setAppHomePage("https://www.winboll.cc/apks/index.php?project=APPBase");
+        appInfo.setAppAPKName("APPBase");
+        appInfo.setAppAPKFolderName("APPBase");
+        LogUtils.d(TAG, "genDefaultAppInfo: 应用信息已生成");
+        return appInfo;
+    }
+}

appbase/src/main/java/cc/winboll/studio/appbase/App.java

@@ -0,0 +1,48 @@
+package cc.winboll.studio.appbase;
+
+import cc.winboll.studio.libappbase.GlobalApplication;
+import cc.winboll.studio.libappbase.ToastUtils;
+import cc.winboll.studio.libappbase.BuildConfig;
+
+/**
+ * @Author ZhanGSKen<zhangsken@qq.com>
+ * @Date 2025/01/05 09:54:42
+ * @Describe 应用全局入口类（继承基础库 GlobalApplication）
+ * 负责应用初始化、全局资源管理与生命周期回调处理，是整个应用的核心入口
+ */
+public class App extends GlobalApplication {
+
+    /** 当前应用类的日志 TAG（用于调试输出，标识日志来源） */
+    public static final String TAG = "App";
+
+    /**
+     * 应用创建时回调（全局初始化入口）
+     * 在应用进程启动时执行，仅调用一次，用于初始化全局工具类、第三方库等
+     */
+    @Override
+    public void onCreate() {
+        super.onCreate();
+		// 如果应用不在调试状态，就根据编译类型设置调试状态
+		if (isDebugging() != true) {
+			setIsDebugging(BuildConfig.DEBUG);
+		}
+		// release 版调试码
+		//setIsDebugging(!BuildConfig.DEBUG);
+		
+        // 初始化 Toast 工具类（传入应用全局上下文，确保 Toast 可在任意地方调用）
+        ToastUtils.init(getApplicationContext());
+    }
+
+    /**
+     * 应用终止时回调（资源释放入口）
+     * 仅在模拟环境（如 Android Studio 模拟器）中可靠触发，真机上可能因系统回收进程不执行
+     * 用于释放全局资源，避免内存泄漏
+     */
+    @Override
+    public void onTerminate() {
+        super.onTerminate(); // 调用父类终止逻辑（如基础库资源释放）
+        // 释放 Toast 工具类资源（销毁全局 Toast 实例，避免内存泄漏）
+        ToastUtils.release();
+    }
+}
+

appbase/src/main/java/cc/winboll/studio/appbase/CrashTestActivity.java

@@ -0,0 +1,28 @@
+package cc.winboll.studio.appbase;
+
+import android.app.Activity;
+import android.os.Bundle;
+import android.view.View;
+import cc.winboll.studio.libappbase.LogUtils;
+import cc.winboll.studio.libappbase.ToastUtils;
+
+public class CrashTestActivity extends Activity {
+
+    public static final String TAG = "CrashTestActivity";
+
+    @Override
+    protected void onCreate(Bundle savedInstanceState) {
+        super.onCreate(savedInstanceState);
+        setContentView(R.layout.activity_crash_test);
+        LogUtils.d(TAG, "CrashTestActivity onCreate()");
+    }
+
+    public void onBack(View view) {
+        finish();
+    }
+
+    public void onTestCrash(View view) {
+        LogUtils.d(TAG, "onTestCrash()");
+        ToastUtils.show("测试布局崩溃...");
+    }
+}

appbase/src/main/java/cc/winboll/studio/appbase/Main2Activity.java

@@ -0,0 +1,20 @@
+package cc.winboll.studio.appbase;
+
+import android.os.Bundle;
+import android.widget.Toolbar;
+import cc.winboll.studio.appbase.R;
+
+public class Main2Activity extends MainActivity {
+
+    public static final String TAG = "Main2Activity";
+
+    @Override
+    protected void onCreate(Bundle savedInstanceState) {
+        super.onCreate(savedInstanceState);
+        setContentView(R.layout.activity_main2);
+        Toolbar toolbar = findViewById(R.id.toolbar);
+        if (toolbar != null) {
+            setActionBar(toolbar);
+        }
+    }
+}

appbase/src/main/java/cc/winboll/studio/appbase/MainActivity.java

@@ -0,0 +1,177 @@
+package cc.winboll.studio.appbase;
+
+import android.app.Activity;
+import android.content.Context;
+import android.content.Intent;
+import android.net.Uri;
+import android.os.Bundle;
+import android.view.Menu;
+import android.view.MenuItem;
+import android.view.View;
+import android.widget.Toolbar;
+import cc.winboll.studio.appbase.R;
+import cc.winboll.studio.appbase.model.TestBean;
+import cc.winboll.studio.libappbase.LogActivity;
+import cc.winboll.studio.libappbase.LogUtils;
+import cc.winboll.studio.libappbase.ToastUtils;
+
+/**
+ * @Author ZhanGSKen<zhangsken@qq.com>
+ * @Date 未标注（建议补充创建日期）
+ * @Describe 应用主界面 Activity（入口界面）
+ * 包含功能测试按钮（崩溃测试、日志查看、Toast测试）、顶部工具栏（菜单功能），是应用交互的核心入口
+ */
+public class MainActivity extends Activity {
+
+    /** 当前 Activity 的日志 TAG（用于调试输出，标识日志来源） */
+    public static final String TAG = "MainActivity";
+
+    /** 顶部工具栏（用于展示标题、菜单，绑定布局中的 Toolbar 控件） */
+    private Toolbar mToolbar;
+
+    /**
+     * Activity 创建时回调（初始化界面）
+     * 在 Activity 首次创建时执行，用于加载布局、初始化控件、设置事件监听
+     * @param savedInstanceState 保存 Activity 状态的 Bundle（如屏幕旋转时的数据恢复）
+     */
+    @Override
+    protected void onCreate(Bundle savedInstanceState) {
+        super.onCreate(savedInstanceState);
+        //ToastUtils.show("onCreate"); // 显示 Activity 创建提示（调试用）
+        setContentView(R.layout.activity_main); // 加载主界面布局
+
+        // 初始化 Toolbar 并设置为 ActionBar
+        mToolbar = findViewById(R.id.toolbar);
+        setActionBar(mToolbar); // 将 Toolbar 替代系统默认 ActionBar
+		
+		initTestData();
+    }
+	
+	void initTestData() {
+		TestBean bean1 = new TestBean();
+		bean1.setTestNum1(456);
+		TestBean.saveBeanToFile(getFilesDir().getAbsolutePath() + getTestBeanRelativePath(), bean1);
+		TestBean bean2 = new TestBean();
+		bean2.setTestNum1(789);
+		TestBean.saveBeanToFile(getExternalFilesDir(null).getAbsolutePath() + getTestBeanRelativePath(), bean2);
+	}
+	
+	String getTestBeanRelativePath() {
+		return "/BaseBaen/"+TestBean.class.getName()+".json";
+	}
+
+    /**
+     * 创建菜单时回调（加载工具栏菜单）
+     * 初始化 ActionBar 菜单，加载自定义菜单布局
+     * @param menu 菜单对象（用于承载菜单项）
+     * @return true：显示菜单；false：不显示菜单
+     */
+    @Override
+    public boolean onCreateOptionsMenu(Menu menu) {
+        // 加载菜单布局（R.menu.toolbar_main 为自定义菜单文件）
+        getMenuInflater().inflate(R.menu.toolbar_main, menu);
+        return super.onCreateOptionsMenu(menu);
+    }
+
+    /**
+     * 菜单 item 点击时回调（处理菜单事件）
+     * 响应 Toolbar 菜单项的点击事件，执行对应业务逻辑
+     * @param item 被点击的菜单项
+     * @return true：消费点击事件；false：不消费（传递给父类）
+     */
+    @Override
+    public boolean onOptionsItemSelected(MenuItem item) {
+        switch (item.getItemId()) {
+            case R.id.item_home:
+                // 点击 "首页/官网" 菜单项，唤起浏览器打开指定网站
+                openWebsiteInBrowser(this);
+                break;
+				// 可扩展其他菜单项（如设置、关于等）的处理逻辑
+        }
+        return super.onOptionsItemSelected(item);
+    }
+
+    /**
+     * 崩溃测试按钮点击事件（触发应用崩溃，用于调试异常捕获）
+     * 故意执行非法操作（循环获取不存在的字符串资源），强制应用崩溃
+     * @param view 触发事件的 View（对应布局中的崩溃测试按钮）
+     */
+    public void onCrashTest(View view) {
+        // 循环从 Integer.MIN_VALUE 到 Integer.MAX_VALUE，获取不存在的字符串资源 ID，触发崩溃
+        for (int i = Integer.MIN_VALUE; i < Integer.MAX_VALUE; i++) {
+            getString(i); // i 超出资源 ID 范围，抛出 Resources.NotFoundException 导致崩溃
+        }
+    }
+
+    public void onLogTestNewTask(View view) {
+        LogActivity.startLogActivity(this, true);
+    }
+
+    /**
+     * 日志测试按钮点击事件（打开日志查看界面）
+     * 启动 LogActivity，用于查看应用运行日志
+     * @param view 触发事件的 View（对应布局中的日志测试按钮）
+     */
+    public void onLogTest(View view) {
+        LogActivity.startLogActivity(this, false);
+    }
+
+    /**
+     * Toast 工具测试按钮点击事件（测试全局 Toast 功能）
+     * 测试主线程、子线程中 Toast 的显示效果，验证 ToastUtils 的可用性
+     * @param view 触发事件的 View（对应布局中的 Toast 测试按钮）
+     */
+    public void onToastUtilsTest(View view) {
+        LogUtils.d(TAG, "onToastUtilsTest"); // 打印调试日志，标识进入 Toast 测试
+        ToastUtils.show("Hello, WinBoLL!"); // 主线程显示 Toast
+
+        // 开启子线程，延迟 2 秒后显示 Toast（测试子线程 Toast 兼容性）
+        new Thread(new Runnable() {
+				@Override
+				public void run() {
+					try {
+						Thread.sleep(2000); // 线程休眠 2 秒
+						// 若 ToastUtils 已处理主线程切换，此处可直接调用；否则需通过 Handler 切换到主线程
+						ToastUtils.show("Thread.sleep(2000);ToastUtils.show...");
+					} catch (InterruptedException e) {
+						// 捕获线程中断异常（如线程被销毁时），不做处理（测试场景）
+						e.printStackTrace();
+					}
+				}
+			}).start();
+    }
+
+    /**
+     * 唤起系统默认浏览器打开指定网站（跳转至应用官网）
+     * 通过 Intent.ACTION_VIEW 隐式意图，触发浏览器打开目标 URL
+     * @param context 上下文对象（如 Activity、Application，此处为 MainActivity）
+     */
+    public void openWebsiteInBrowser(Context context) {
+        String url = "https://www.winboll.cc"; // 目标网站 URL（应用官网）
+        // 构建隐式意图：ACTION_VIEW 表示查看指定数据（Uri 为网站地址）
+        Intent intent = new Intent(Intent.ACTION_VIEW, Uri.parse(url));
+        // 设置标志：在新的任务栈中启动 Activity（避免与当前应用任务栈混淆）
+        intent.setFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
+        // 启动意图（唤起浏览器）
+        context.startActivity(intent);
+    }
+
+	public void onAboutActivity(View view) {
+        LogUtils.d(TAG, "onAboutActivity() 调用");
+        Intent aboutIntent = new Intent(getApplicationContext(), AboutActivity.class);
+        startActivity(aboutIntent);
+    }
+
+
+
+	public void onMultiInstance(View view) {
+        LogUtils.d(TAG, "onMultiInstance() 多开窗口按钮已点击");
+        ToastUtils.show("多开窗口：已启动新窗口");
+        android.content.Intent intent = new android.content.Intent(this, Main2Activity.class);
+        intent.setFlags(android.content.Intent.FLAG_ACTIVITY_NEW_TASK);
+        LogUtils.d(TAG, "onMultiInstance() 准备启动Main2Activity");
+        startActivity(intent);
+        LogUtils.d(TAG, "onMultiInstance() Main2Activity已启动");
+    }
+}
+

appbase/src/main/java/cc/winboll/studio/appbase/model/TestBean.java

@@ -0,0 +1,154 @@
+package cc.winboll.studio.appbase.model;
+
+import android.util.JsonReader;
+import android.util.JsonWriter;
+import cc.winboll.studio.libappbase.BaseBean;
+import cc.winboll.studio.libappbase.LogUtils;
+import java.io.IOException;
+
+/**
+ * 测试实体类
+ * 继承BaseBean实现JSON序列化/反序列化能力，提供基础int类型属性的封装与数据持久化支持
+ * 适配Java7语法，遵循BaseBean统一的反射识别、JSON读写规范
+ * @Author 豆包&ZhanGSKen<zhangsken@qq.com>
+ * @Date 2026/01/31 19:16:00
+ * @LastEditTime 2026/02/01 10:46:00
+ */
+public class TestBean extends BaseBean {
+
+    // ====================================== 常量定义 ======================================
+    /** 当前类的日志 TAG（用于调试输出） */
+    public static final String TAG = "TestBean";
+
+    // ====================================== 成员属性 ======================================
+    /**
+     * 测试数字属性（默认值：123）
+     * 基础int类型属性，用于测试BaseBean的JSON序列化/反序列化能力
+     */
+    private int testNum1;
+
+    // ====================================== 构造方法 ======================================
+    /**
+     * 无参构造器（默认初始化）
+     * 给testNum1赋值默认值123，满足反射实例化、JSON解析的无参构造要求
+     */
+    public TestBean() {
+        this.testNum1 = 123;
+        LogUtils.d(TAG, "TestBean无参构造器调用，testNum1默认初始化值：" + this.testNum1);
+    }
+
+    /**
+     * 有参构造器（自定义初始化）
+     * @param testNum1 测试数字初始值
+     */
+    public TestBean(int testNum1) {
+        this.testNum1 = testNum1;
+        LogUtils.d(TAG, "TestBean有参构造器调用，传入testNum1：" + testNum1);
+    }
+
+    // ====================================== Get/Set 方法 ======================================
+    /**
+     * 设置测试数字属性值
+     * @param testNum1 待设置的int类型值
+     */
+    public void setTestNum1(int testNum1) {
+        LogUtils.d(TAG, "setTestNum1调用，传入参数：" + testNum1);
+        this.testNum1 = testNum1;
+    }
+
+    /**
+     * 获取测试数字属性值
+     * @return 当前testNum1的int类型值
+     */
+    public int getTestNum1() {
+        LogUtils.d(TAG, "getTestNum1调用，返回值：" + this.testNum1);
+        return testNum1;
+    }
+
+    // ====================================== 重写父类BaseBean方法 ======================================
+    /**
+     * 重写父类方法：获取当前类的全限定名
+     * 用于BaseBean反射识别、类名匹配等统一逻辑
+     * @return 类全限定名（cc.winboll.studio.appbase.model.TestBean）
+     */
+    @Override
+    public String getName() {
+        LogUtils.d(TAG, "getName方法调用，返回类全限定名：" + TestBean.class.getName());
+        return TestBean.class.getName();
+    }
+
+    /**
+     * 重写父类方法：将当前对象序列化为JSON（持久化存储专用）
+     * 遵循BaseBean规范，先执行父类序列化逻辑，再处理子类专属字段
+     * @param jsonWriter JSON写入器（外部传入的JSON流操作实例）
+     * @throws IOException JSON写入异常（流关闭、格式错误等）
+     */
+    @Override
+    public void writeThisToJsonWriter(JsonWriter jsonWriter) throws IOException {
+        LogUtils.d(TAG, "writeThisToJsonWriter调用，传入参数JsonWriter：" + jsonWriter);
+        // 执行父类公共字段的序列化逻辑
+        super.writeThisToJsonWriter(jsonWriter);
+        // 序列化子类专属字段testNum1
+        jsonWriter.name("testNum1").value(this.getTestNum1());
+        LogUtils.d(TAG, "writeThisToJsonWriter执行完成，已序列化testNum1：" + this.getTestNum1());
+    }
+
+    /**
+     * 重写父类方法：从JSON字段初始化当前对象属性（解析JSON专用）
+     * 先让父类处理公共字段，再匹配子类专属字段，不匹配则返回false跳过
+     * @param jsonReader JSON读取器（外部传入的JSON流操作实例）
+     * @param name 当前解析的JSON字段名
+     * @return true-字段解析成功；false-字段不匹配，需跳过/父类处理
+     * @throws IOException JSON读取异常（字段类型不匹配、流中断等）
+     */
+    @Override
+    public boolean initObjectsFromJsonReader(JsonReader jsonReader, String name) throws IOException {
+        LogUtils.d(TAG, "initObjectsFromJsonReader调用，传入参数：name=" + name + "，JsonReader=" + jsonReader);
+        // 父类优先处理公共字段，处理成功则直接返回
+        if (super.initObjectsFromJsonReader(jsonReader, name)) {
+            LogUtils.d(TAG, "initObjectsFromJsonReader：字段" + name + "由父类BaseBean处理成功");
+            return true;
+        }
+        // 解析子类专属字段
+        if ("testNum1".equals(name)) {
+            this.setTestNum1(jsonReader.nextInt());
+            LogUtils.d(TAG, "initObjectsFromJsonReader：解析testNum1成功，值为：" + this.getTestNum1());
+        } else {
+            LogUtils.w(TAG, "initObjectsFromJsonReader：字段" + name + "不匹配，返回false跳过解析");
+            // 字段不匹配，返回false表示跳过
+            return false;
+        }
+        return true;
+    }
+
+    /**
+     * 重写父类方法：从JSON读取器完整解析并初始化当前对象（JSON解析入口）
+     * 负责JSON对象的开始/结束标识处理，遍历所有字段并调用字段解析方法
+     * 严格遵循writeThisToJsonWriter的序列化结构，保证解析一致性
+     * @param jsonReader JSON读取器（外部传入的JSON流操作实例）
+     * @return 解析后的当前TestBean实例（支持链式调用）
+     * @throws IOException JSON解析异常（格式错误、字段缺失、流异常等）
+     */
+    @Override
+    public BaseBean readBeanFromJsonReader(JsonReader jsonReader) throws IOException {
+        LogUtils.d(TAG, "readBeanFromJsonReader调用，传入参数JsonReader：" + jsonReader);
+        // 开始解析JSON对象，与序列化结构保持一致
+        jsonReader.beginObject();
+        // 遍历所有JSON字段
+        while (jsonReader.hasNext()) {
+            String fieldName = jsonReader.nextName();
+            LogUtils.d(TAG, "readBeanFromJsonReader：开始解析字段，fieldName=" + fieldName);
+            // 解析字段，不匹配则跳过该值
+            if (!this.initObjectsFromJsonReader(jsonReader, fieldName)) {
+                jsonReader.skipValue();
+                LogUtils.w(TAG, "readBeanFromJsonReader：字段" + fieldName + "解析失败，已跳过该值");
+            }
+        }
+        // 结束JSON对象解析，必须调用避免流异常
+        jsonReader.endObject();
+        LogUtils.d(TAG, "readBeanFromJsonReader执行完成，JSON解析结束，当前TestBean实例testNum1：" + this.getTestNum1());
+        // 返回当前实例，支持链式调用
+        return this;
+    }
+}
+

appbase/src/main/res/drawable/btn_light_blue.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="utf-8"?>
+<shape xmlns:android="http://schemas.android.com/apk/res/android"
+    android:shape="rectangle">
+    <solid android:color="#81C7F5"/> <!-- 浅蓝色填充 -->
+    <corners android:radius="8dp"/> <!-- 8dp 圆角 -->
+</shape>
+

appbase/src/main/res/layout-night/activity_about.xml

@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<LinearLayout
+	xmlns:android="http://schemas.android.com/apk/res/android"
+	xmlns:app="http://schemas.android.com/apk/res-auto"
+	android:orientation="vertical"
+	android:layout_width="match_parent"
+	android:layout_height="match_parent"
+	android:background="?attr/activityBackgroundColor">
+
+	<android.widget.Toolbar
+		android:layout_width="match_parent"
+		android:layout_height="wrap_content"
+		android:background="?attr/toolbarBackgroundColor"
+		android:id="@+id/toolbar"/>
+
+	<cc.winboll.studio.libappbase.views.AboutView
+		android:layout_width="match_parent"
+		android:layout_height="0dp"
+		android:layout_weight="1.0"
+		android:id="@+id/aboutview"/>
+
+</LinearLayout>

appbase/src/main/res/layout-night/activity_main.xml

@@ -0,0 +1,106 @@
+<?xml version="1.0" encoding="utf-8"?>
+<LinearLayout
+	xmlns:android="http://schemas.android.com/apk/res/android"
+	android:orientation="vertical"
+	android:layout_width="match_parent"
+	android:layout_height="match_parent"
+	android:padding="0dp"
+	android:background="?attr/activityBackgroundColor">
+
+	<android.widget.Toolbar
+		android:layout_width="match_parent"
+		android:layout_height="wrap_content"
+		android:background="?attr/toolbarBackgroundColor"
+		android:id="@+id/toolbar"/>
+
+	<ScrollView
+		android:layout_width="match_parent"
+		android:layout_height="0dp"
+		android:layout_weight="1.0">
+
+		<LinearLayout
+			android:layout_width="match_parent"
+			android:layout_height="wrap_content"
+			android:orientation="vertical"
+			android:gravity="center_vertical"
+			android:spacing="12dp">
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="关于应用"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onAboutActivity"
+				android:layout_margin="10dp"/>
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="应用崩溃测试"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onCrashTest"
+				android:layout_margin="10dp"/>
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="应用日志测试"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onLogTest"
+				android:layout_margin="10dp"/>
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="应用日志测试（新窗口）"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onLogTestNewTask"
+				android:layout_margin="10dp"/>
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="应用吐司测试"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onToastUtilsTest"
+				android:layout_margin="10dp"/>
+
+
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="多开窗口"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onMultiInstance"
+				android:layout_margin="10dp"/>
+
+		</LinearLayout>
+
+	</ScrollView>
+
+</LinearLayout>

appbase/src/main/res/layout-night/activity_main2.xml

@@ -0,0 +1,17 @@
+<?xml version="1.0" encoding="utf-8"?>
+<LinearLayout
+	xmlns:android="http://schemas.android.com/apk/res/android"
+	android:orientation="vertical"
+	android:layout_width="match_parent"
+	android:layout_height="match_parent"
+	android:gravity="center"
+	android:background="@android:color/white">
+
+	<TextView
+		android:layout_width="wrap_content"
+		android:layout_height="wrap_content"
+		android:text="Main2Activity"
+		android:textSize="24sp"
+		android:textColor="@color/gray_900"/>
+
+</LinearLayout>

appbase/src/main/res/layout/activity_about.xml

@@ -0,0 +1,23 @@
+<?xml version="1.0" encoding="utf-8"?>
+<LinearLayout
+	xmlns:android="http://schemas.android.com/apk/res/android"
+	xmlns:app="http://schemas.android.com/apk/res-auto"
+	android:orientation="vertical"
+	android:layout_width="match_parent"
+	android:layout_height="match_parent"
+	android:background="?attr/activityBackgroundColor">
+
+	<android.widget.Toolbar
+		android:layout_width="match_parent"
+		android:layout_height="wrap_content"
+		android:background="?attr/toolbarBackgroundColor"
+		android:id="@+id/toolbar"/>
+
+	<cc.winboll.studio.libappbase.views.AboutView
+		android:layout_width="match_parent"
+		android:layout_height="0dp"
+		android:layout_weight="1.0"
+		android:id="@+id/aboutview"/>
+
+</LinearLayout>
+

appbase/src/main/res/layout/activity_crash_test.xml

@@ -0,0 +1,60 @@
+<?xml version="1.0" encoding="utf-8"?>
+<LinearLayout
+	xmlns:android="http://schemas.android.com/apk/res/android"
+	android:orientation="vertical"
+	android:layout_width="match_parent"
+	android:layout_height="match_parent"
+	android:padding="0dp"
+	android:background="?attr/activityBackgroundColor">
+
+	<android.widget.Toolbar
+		android:layout_width="match_parent"
+		android:layout_height="wrap_content"
+		android:background="?attr/toolbarBackgroundColor"
+		android:id="@+id/toolbar"/>
+
+	<ScrollView
+		android:layout_width="match_parent"
+		android:layout_height="0dp"
+		android:layout_weight="1.0">
+
+		<LinearLayout
+			android:layout_width="match_parent"
+			android:layout_height="wrap_content"
+			android:orientation="vertical"
+			android:gravity="center_vertical">
+
+			<cc.winboll.studio.appbase.UndefinedCustomView
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:layout_margin="10dp"/>
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="返回"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onBack"
+				android:layout_margin="10dp"/>
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="测试崩溃"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onTestCrash"
+				android:layout_margin="10dp"/>
+
+		</LinearLayout>
+
+	</ScrollView>
+
+</LinearLayout>

appbase/src/main/res/layout/activity_main.xml

@@ -0,0 +1,106 @@
+<?xml version="1.0" encoding="utf-8"?>
+<LinearLayout
+	xmlns:android="http://schemas.android.com/apk/res/android"
+	android:orientation="vertical"
+	android:layout_width="match_parent"
+	android:layout_height="match_parent"
+	android:padding="0dp"
+	android:background="?attr/activityBackgroundColor">
+
+	<android.widget.Toolbar
+		android:layout_width="match_parent"
+		android:layout_height="wrap_content"
+		android:background="?attr/toolbarBackgroundColor"
+		android:id="@+id/toolbar"/>
+
+	<ScrollView
+		android:layout_width="match_parent"
+		android:layout_height="0dp"
+		android:layout_weight="1.0">
+
+		<LinearLayout
+			android:layout_width="match_parent"
+			android:layout_height="wrap_content"
+			android:orientation="vertical"
+			android:gravity="center_vertical"
+			android:spacing="12dp">
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="关于应用"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onAboutActivity"
+				android:layout_margin="10dp"/>
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="应用崩溃测试"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onCrashTest"
+				android:layout_margin="10dp"/>
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="应用日志测试"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onLogTest"
+				android:layout_margin="10dp"/>
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="应用日志测试（新窗口）"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onLogTestNewTask"
+				android:layout_margin="10dp"/>
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="应用吐司测试"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onToastUtilsTest"
+				android:layout_margin="10dp"/>
+
+
+
+			<Button
+				android:layout_width="match_parent"
+				android:layout_height="wrap_content"
+				android:text="多开窗口"
+				android:textSize="16sp"
+				android:textColor="?attr/activityTextColor"
+				android:background="?attr/toolbarBackgroundColor"
+				android:paddingVertical="12dp"
+				android:layout_marginHorizontal="24dp"
+				android:onClick="onMultiInstance"
+				android:layout_margin="10dp"/>
+
+		</LinearLayout>
+
+	</ScrollView>
+
+</LinearLayout>

appbase/src/main/res/layout/activity_main2.xml

@@ -0,0 +1,17 @@
+<?xml version="1.0" encoding="utf-8"?>
+<LinearLayout
+	xmlns:android="http://schemas.android.com/apk/res/android"
+	android:orientation="vertical"
+	android:layout_width="match_parent"
+	android:layout_height="match_parent"
+	android:gravity="center"
+	android:background="?attr/activityBackgroundColor">
+
+	<TextView
+		android:layout_width="wrap_content"
+		android:layout_height="wrap_content"
+		android:text="Main2Activity"
+		android:textSize="24sp"
+		android:textColor="?attr/activityTextColor"/>
+
+</LinearLayout>

appbase/src/main/res/layout/activity_nfcrsaoperate.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    xmlns:app="http://schemas.android.com/apk/res-auto"
+    android:orientation="vertical"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent">
+    
+</LinearLayout>

appbase/src/main/res/menu/toolbar_main.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<menu xmlns:android="http://schemas.android.com/apk/res/android"
+    xmlns:app="http://schemas.android.com/apk/res-auto">
+    <item
+        android:id="@+id/item_home"
+        android:title="Home"
+        android:icon="@drawable/ic_winboll"
+        android:showAsAction="always"/>
+</menu>

appbase/src/main/res/values-night/colors.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources>
+    <color name="colorPrimary">#FF1B8B29</color>
+    <color name="colorPrimaryDark">#FF0A5520</color>
+    <color name="colorAccent">#FF6EE87C</color>
+    <color name="colorText">#FFB8FF7D</color>
+</resources>

appbase/src/main/res/values-night/styles.xml

@@ -0,0 +1,14 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources>
+    <style name="MyAPPBaseTheme" parent="APPBaseTheme">
+        <item name="themeDebug">@style/MyDebugActivityTheme</item>
+    </style>
+
+    <style name="MyDebugActivityTheme" parent="DebugActivityTheme">
+        <item name="colorTittle">?attr/mainWindowDarkTextColor</item>
+        <item name="colorTittleBackgound">?attr/toolbarBackgroundColor</item>
+        <item name="colorText">?attr/debugTextColor</item>
+        <item name="colorTextBackgound">?attr/mainWindowDarkBackgroundColor</item>
+        <item name="toolbarTextColor">@color/toolbarTextColor</item>
+	</style>
+</resources>

appbase/src/main/res/values/colors.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources>
+    <color name="colorPrimary">#FF00B322</color>
+    <color name="colorPrimaryDark">#FF005C12</color>
+    <color name="colorAccent">#FF8DFFA2</color>
+    <color name="colorText">#FFFFFB8D</color>
+</resources>

appbase/src/main/res/values/strings.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources>
+    <string name="app_name">APPBase</string>
+    <string name="app_description">WinBoLL 安卓手机端安卓应用开发基础类库。</string>
+    <string name="app_normal">Click here is switch to Normal APP</string>
+    <string name="app_debug">Click here is switch to APP DEBUG</string>
+	<string name="gitea_home">GITEA HOME</string>
+    <string name="app_update">APP UPDATE</string>
+</resources>

appbase/src/main/res/values/styles.xml

@@ -0,0 +1,14 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources>
+    <style name="MyAPPBaseTheme" parent="APPBaseTheme">
+        <item name="themeDebug">@style/MyDebugActivityTheme</item>
+    </style>
+
+    <style name="MyDebugActivityTheme" parent="DebugActivityTheme">
+        <item name="colorTittle">?attr/mainWindowTextColor</item>
+        <item name="colorTittleBackgound">?attr/toolbarBackgroundColor</item>
+        <item name="colorText">?attr/debugTextColor</item>
+        <item name="colorTextBackgound">?attr/mainWindowBackgroundColor</item>
+        <item name="toolbarTextColor">@color/toolbarTextColor</item>
+	</style>
+</resources>

appbase/src/stage/AndroidManifest.xml

@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="utf-8"?>
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    xmlns:tools="http://schemas.android.com/tools" >
+
+    <application>
+
+        <!-- Put flavor specific code here -->
+
+    </application>
+
+</manifest>
+

appbase/src/stage/res/values/strings.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources>
+
+    <!-- Put flavor specific strings here -->
+
+</resources>

autonfc/.gitignore

@@ -0,0 +1 @@
+/build

autonfc/README.md

@@ -0,0 +1,34 @@
+# AutoNFC
+
+#### 介绍
+NFC 卡应用，主要管理 NFC 卡接触手机的动作响应，NFC 接触状态用于作为其他应用激活活动动作的启动令牌。
+
+#### 软件架构
+适配安卓应用 [AIDE Pro] 的 Gradle 编译结构。
+也适配安卓应用 [AndroidIDE] 的 Gradle 编译结构。
+
+
+#### Gradle 编译说明
+调试版编译命令 ：gradle assembleBetaDebug
+阶段版编译命令 ：bash .winboll/bashPublishAPKAddTag.sh autonfc
+
+#### 使用说明
+
+#### 参与贡献
+
+1.  Fork 本仓库
+2.  新建 Feat_xxx 分支
+3.  提交代码 : ZhanGSKen(ZhanGSKen<zhangsken@188.com>)
+4.  新建 Pull Request
+
+
+#### 特技
+
+1.  使用 Readme\_XXX.md 来支持不同的语言，例如 Readme\_en.md, Readme\_zh.md
+2.  Gitee 官方博客 [blog.gitee.com](https://blog.gitee.com)
+3.  你可以 [https://gitee.com/explore](https://gitee.com/explore) 这个地址来了解 Gitee 上的优秀开源项目
+4.  [GVP](https://gitee.com/gvp) 全称是 Gitee 最有价值开源项目，是综合评定出的优秀开源项目
+5.  Gitee 官方提供的使用手册 [https://gitee.com/help](https://gitee.com/help)
+6.  Gitee 封面人物是一档用来展示 Gitee 会员风采的栏目 [https://gitee.com/gitee-stars/](https://gitee.com/gitee-stars/)
+
+#### 参考文档

autonfc/app_update_description.txt

@@ -0,0 +1 @@
+

autonfc/build.gradle

@@ -0,0 +1,119 @@
+apply plugin: 'com.android.application'
+apply from: '../.winboll/winboll_app_build.gradle'
+apply from: '../.winboll/winboll_lint_build.gradle'
+
+def genVersionName(def versionName){
+    // 检查编译标志位配置
+    assert (winbollBuildProps['stageCount'] != null)
+    assert (winbollBuildProps['baseVersion'] != null)
+    // 保存基础版本号
+    winbollBuildProps.setProperty("baseVersion", "${versionName}");
+    //保存编译标志配置
+    FileOutputStream fos = new FileOutputStream(winbollBuildPropsFile)
+    winbollBuildProps.store(fos, "${winbollBuildPropsDesc}");
+    fos.close();
+    
+    // 返回编译版本号
+    return "${versionName}." + winbollBuildProps['stageCount']
+}
+
+android {
+	// 适配MIUI12
+	compileSdkVersion 30
+    buildToolsVersion "30.0.3"
+	
+    defaultConfig {
+        applicationId "cc.winboll.studio.autonfc"
+	    minSdkVersion 23
+		// 适配MIUI12
+        targetSdkVersion 30
+        versionCode 1
+        // versionName 更新后需要手动设置 
+        // .winboll/winbollBuildProps.properties 文件的 stageCount=0
+        // Gradle编译环境下合起来的 versionName 就是 "${versionName}.0"
+        versionName "15.11"
+        if(true) {
+            versionName = genVersionName("${versionName}")
+        }
+    }
+
+	// 米盟 SDK
+    packagingOptions {
+         doNotStrip "*/*/libmimo_1011.so"
+    }
+	
+    sourceSets {
+        main {
+            jniLibs.srcDirs = ['libs'] // 若SO库放在libs目录下
+        }
+    }
+}
+
+dependencies {
+    
+    api 'com.google.code.gson:gson:2.10.1'
+	
+	// 下拉控件
+    api 'com.baoyz.pullrefreshlayout:library:1.2.0'
+    
+    // SSH
+    api 'com.jcraft:jsch:0.1.55'
+    // Html 解析
+    api 'org.jsoup:jsoup:1.13.1'
+    // 二维码类库
+    api 'com.google.zxing:core:3.4.1'
+    api 'com.journeyapps:zxing-android-embedded:3.6.0'
+    // 应用介绍页类库
+    api 'io.github.medyo:android-about-page:2.0.0'
+	// 网络连接类库
+    api 'com.squareup.okhttp3:okhttp:4.4.1'
+	// OkHttp网络请求
+     implementation 'com.squareup.okhttp3:okhttp:3.14.9'
+     // FastJSON解析
+     implementation 'com.alibaba:fastjson:1.2.76'
+    
+	// AndroidX 类库
+    /*api 'androidx.appcompat:appcompat:1.1.0'
+    //api 'com.google.android.material:material:1.4.0'
+    //api 'androidx.viewpager:viewpager:1.0.0'
+    //api 'androidx.vectordrawable:vectordrawable:1.1.0'
+    //api 'androidx.vectordrawable:vectordrawable-animated:1.1.0'
+    //api 'androidx.fragment:fragment:1.1.0'*/
+	
+	
+	// 米盟
+	api 'com.miui.zeus:mimo-ad-sdk:5.3.+'//请使用最新版sdk
+     //注意：以下5个库必须要引入
+    //implementation 'androidx.appcompat:appcompat:1.4.1'
+    api 'androidx.recyclerview:recyclerview:1.0.0'
+    api 'com.google.code.gson:gson:2.8.5'
+    api 'com.github.bumptech.glide:glide:4.9.0'
+    //annotationProcessor 'com.github.bumptech.glide:compiler:4.9.0'
+
+	implementation "androidx.annotation:annotation:1.3.0"
+    implementation "androidx.core:core:1.6.0"
+    implementation "androidx.drawerlayout:drawerlayout:1.1.1"
+    implementation "androidx.preference:preference:1.1.1"
+    implementation "androidx.viewpager:viewpager:1.0.0"
+    implementation "com.google.android.material:material:1.4.0"
+    implementation "com.google.guava:guava:24.1-jre"
+    /*
+	implementation "io.noties.markwon:core:$markwonVersion"
+    implementation "io.noties.markwon:ext-strikethrough:$markwonVersion"
+    implementation "io.noties.markwon:linkify:$markwonVersion"
+    implementation "io.noties.markwon:recycler:$markwonVersion"
+	*/
+	implementation 'com.termux:terminal-emulator:0.118.0'
+	implementation 'com.termux:terminal-view:0.118.0'
+	implementation 'com.termux:termux-shared:0.118.0'
+	
+	// WinBoLL库 nexus.winboll.cc 地址
+	api 'cc.winboll.studio:libaes:15.15.2'
+    api 'cc.winboll.studio:libappbase:15.15.11'
+	
+	// WinBoLL备用库 jitpack.io 地址
+	//api 'com.github.ZhanGSKen:AES:aes-v15.15.7'
+	//api 'com.github.ZhanGSKen:APPBase:appbase-v15.15.4'
+	
+	api fileTree(dir: 'libs', include: ['*.jar'])
+}

autonfc/build.properties

@@ -0,0 +1,8 @@
+#Created by .winboll/winboll_app_build.gradle
+#Mon Mar 16 18:30:19 GMT 2026
+stageCount=0
+libraryProject=
+baseVersion=15.11
+publishVersion=15.0.0
+buildCount=54
+baseBetaVersion=15.0.1

autonfc/proguard-rules.pro

@@ -0,0 +1,21 @@
+# Add project specific ProGuard rules here.
+# You can control the set of applied configuration files using the
+# proguardFiles setting in build.gradle.
+#
+# For more details, see
+#   http://developer.android.com/guide/developing/tools/proguard.html
+
+# If your project uses WebView with JS, uncomment the following
+# and specify the fully qualified class name to the JavaScript interface
+# class:
+#-keepclassmembers class fqcn.of.javascript.interface.for.webview {
+#   public *;
+#}
+
+# Uncomment this to preserve the line number information for
+# debugging stack traces.
+#-keepattributes SourceFile,LineNumberTable
+
+# If you keep the line number information, uncomment this to
+# hide the original source file name.
+#-renamesourcefileattribute SourceFile

autonfc/src/beta/AndroidManifest.xml

@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="utf-8"?>
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    xmlns:tools="http://schemas.android.com/tools" >
+
+    <application>
+
+        <!-- Put flavor specific code here -->
+
+    </application>
+
+</manifest>
+

autonfc/src/beta/res/values/strings.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources>
+
+    <string name="app_name">AutoNFC✌</string>
+
+</resources>

autonfc/src/main/AndroidManifest.xml

@@ -0,0 +1,51 @@
+<?xml version='1.0' encoding='utf-8'?>
+<manifest
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    package="cc.winboll.studio.autonfc">
+
+    <uses-permission android:name="android.permission.NFC"/>
+
+    <uses-feature
+        android:name="android.hardware.nfc"
+        android:required="true"/>
+
+    <application
+        android:allowBackup="true"
+        android:icon="@mipmap/ic_launcher"
+        android:roundIcon="@mipmap/ic_launcher_round"
+        android:label="@string/app_name"
+        android:theme="@style/MyAppTheme"
+        android:resizeableActivity="true"
+        android:name=".App">
+
+        <activity
+            android:name=".MainActivity"
+            android:label="@string/app_name">
+            <intent-filter>
+                <action android:name="android.intent.action.MAIN"/>
+                <category android:name="android.intent.category.LAUNCHER"/>
+            </intent-filter>
+        </activity>
+
+        <activity
+            android:name=".nfc.NFCInterfaceActivity"
+            android:launchMode="singleTop">
+            <intent-filter>
+                <action android:name="android.nfc.action.NDEF_DISCOVERED"/>
+                <category android:name="android.intent.category.DEFAULT"/>
+                <data android:mimeType="*/*"/>
+            </intent-filter>
+        </activity>
+
+        <!-- NFC 绑定服务 -->
+        <service
+            android:name=".nfc.AutoNFCService"
+            android:exported="false"/>
+
+        <meta-data
+            android:name="android.max_aspect"
+            android:value="4.0"/>
+
+    </application>
+</manifest>
+

autonfc/src/main/java/cc/winboll/studio/autonfc/App.java

@@ -0,0 +1,344 @@
+package cc.winboll.studio.autonfc;
+
+import android.app.Activity;
+import android.content.ClipData;
+import android.content.ClipboardManager;
+import android.content.Context;
+import android.content.Intent;
+import android.content.pm.PackageInfo;
+import android.content.res.Resources;
+import android.graphics.Typeface;
+import android.os.Build;
+import android.os.Bundle;
+import android.os.Handler;
+import android.os.Looper;
+import android.text.TextUtils;
+import android.util.Log;
+import android.view.Gravity;
+import android.view.Menu;
+import android.view.MenuItem;
+import android.view.ViewGroup;
+import android.widget.HorizontalScrollView;
+import android.widget.ScrollView;
+import android.widget.TextView;
+import android.widget.Toast;
+import cc.winboll.studio.libappbase.GlobalApplication;
+import cc.winboll.studio.libappbase.ToastUtils;
+import java.io.ByteArrayInputStream;
+import java.io.ByteArrayOutputStream;
+import java.io.Closeable;
+import java.io.File;
+import java.io.FileInputStream;
+import java.io.FileOutputStream;
+import java.io.IOException;
+import java.io.InputStream;
+import java.io.OutputStream;
+import java.lang.Thread.UncaughtExceptionHandler;
+import java.text.DateFormat;
+import java.text.SimpleDateFormat;
+import java.util.Arrays;
+import java.util.Date;
+import java.util.LinkedHashMap;
+import java.util.concurrent.atomic.AtomicBoolean;
+
+public class App extends GlobalApplication {
+
+    private static Handler MAIN_HANDLER = new Handler(Looper.getMainLooper());
+
+    @Override
+    public void onCreate() {
+        super.onCreate();
+        
+        // 初始化 Toast 框架
+//        ToastUtils.init(this);
+//        // 设置 Toast 布局样式
+//        //ToastUtils.setView(R.layout.view_toast);
+//        ToastUtils.setStyle(new WhiteToastStyle());
+//        ToastUtils.setGravity(Gravity.BOTTOM, 0, 200);
+//        
+        //CrashHandler.getInstance().registerGlobal(this);
+        //CrashHandler.getInstance().registerPart(this);
+    }
+
+    public static void write(InputStream input, OutputStream output) throws IOException {
+        byte[] buf = new byte[1024 * 8];
+        int len;
+        while ((len = input.read(buf)) != -1) {
+            output.write(buf, 0, len);
+        }
+    }
+
+    public static void write(File file, byte[] data) throws IOException {
+        File parent = file.getParentFile();
+        if (parent != null && !parent.exists()) parent.mkdirs();
+
+        ByteArrayInputStream input = new ByteArrayInputStream(data);
+        FileOutputStream output = new FileOutputStream(file);
+        try {
+            write(input, output);
+        } finally {
+            closeIO(input, output);
+        }
+    }
+
+    public static String toString(InputStream input) throws IOException {
+        ByteArrayOutputStream output = new ByteArrayOutputStream();
+        write(input, output);
+        try {
+            return output.toString("UTF-8");
+        } finally {
+            closeIO(input, output);
+        }
+    }
+
+    public static void closeIO(Closeable... closeables) {
+        for (Closeable closeable : closeables) {
+            try {
+                if (closeable != null) closeable.close();
+            } catch (IOException ignored) {}
+        }
+    }
+
+    public static class CrashHandler {
+
+        public static final UncaughtExceptionHandler DEFAULT_UNCAUGHT_EXCEPTION_HANDLER = Thread.getDefaultUncaughtExceptionHandler();
+
+        private static CrashHandler sInstance;
+
+        private PartCrashHandler mPartCrashHandler;
+
+        public static CrashHandler getInstance() {
+            if (sInstance == null) {
+                sInstance = new CrashHandler();
+            }
+            return sInstance;
+        }
+
+        public void registerGlobal(Context context) {
+            registerGlobal(context, null);
+        }
+
+        public void registerGlobal(Context context, String crashDir) {
+            Thread.setDefaultUncaughtExceptionHandler(new UncaughtExceptionHandlerImpl(context.getApplicationContext(), crashDir));
+        }
+
+        public void unregister() {
+            Thread.setDefaultUncaughtExceptionHandler(DEFAULT_UNCAUGHT_EXCEPTION_HANDLER);
+        }
+
+        public void registerPart(Context context) {
+            unregisterPart(context);
+            mPartCrashHandler = new PartCrashHandler(context.getApplicationContext());
+            MAIN_HANDLER.postAtFrontOfQueue(mPartCrashHandler);
+        }
+
+        public void unregisterPart(Context context) {
+            if (mPartCrashHandler != null) {
+                mPartCrashHandler.isRunning.set(false);
+                mPartCrashHandler = null;
+            }
+        }
+
+        private static class PartCrashHandler implements Runnable {
+
+            private final Context mContext;
+
+            public AtomicBoolean isRunning = new AtomicBoolean(true);
+
+            public PartCrashHandler(Context context) {
+                this.mContext = context;
+            }
+
+            @Override
+            public void run() {
+                while (isRunning.get()) {
+                    try {
+                        Looper.loop();
+                    } catch (final Throwable e) {
+                        e.printStackTrace();
+                        if (isRunning.get()) {
+                            MAIN_HANDLER.post(new Runnable(){
+
+                                    @Override
+                                    public void run() {
+                                        Toast.makeText(mContext, e.toString(), Toast.LENGTH_LONG).show();
+                                    }
+                                });
+                        } else {
+                            if (e instanceof RuntimeException) {
+                                throw (RuntimeException)e;
+                            } else {
+                                throw new RuntimeException(e);
+                            }
+                        }
+                    }
+                }
+            }
+        }
+
+        private static class UncaughtExceptionHandlerImpl implements UncaughtExceptionHandler {
+
+            private static DateFormat DATE_FORMAT = new SimpleDateFormat("yyyy_MM_dd-HH_mm_ss");
+
+            private final Context mContext;
+
+            private final File mCrashDir;
+
+            public UncaughtExceptionHandlerImpl(Context context, String crashDir) {
+                this.mContext = context;
+                this.mCrashDir = TextUtils.isEmpty(crashDir) ? new File(mContext.getExternalCacheDir(), "crash") : new File(crashDir);
+            }
+
+            @Override
+            public void uncaughtException(Thread thread, Throwable throwable) {
+                try {
+
+                    String log = buildLog(throwable);
+                    writeLog(log);
+
+                    try {
+                        Intent intent = new Intent(mContext, CrashActivity.class);
+                        intent.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
+                        intent.putExtra(Intent.EXTRA_TEXT, log);
+                        mContext.startActivity(intent);
+                    } catch (Throwable e) {
+                        e.printStackTrace();
+                        writeLog(e.toString());
+                    }
+
+                    throwable.printStackTrace();
+                    android.os.Process.killProcess(android.os.Process.myPid());
+                    System.exit(0);
+
+                } catch (Throwable e) {
+                    if (DEFAULT_UNCAUGHT_EXCEPTION_HANDLER != null) DEFAULT_UNCAUGHT_EXCEPTION_HANDLER.uncaughtException(thread, throwable);
+                }
+            }
+
+            private String buildLog(Throwable throwable) {
+                String time = DATE_FORMAT.format(new Date());
+
+                String versionName = "unknown";
+                long versionCode = 0;
+                try {
+                    PackageInfo packageInfo = mContext.getPackageManager().getPackageInfo(mContext.getPackageName(), 0);
+                    versionName = packageInfo.versionName;
+                    versionCode = Build.VERSION.SDK_INT >= 28 ? packageInfo.getLongVersionCode() : packageInfo.versionCode;
+                } catch (Throwable ignored) {}
+
+                LinkedHashMap<String, String> head = new LinkedHashMap<String, String>();
+                head.put("Time Of Crash", time);
+                head.put("Device", String.format("%s, %s", Build.MANUFACTURER, Build.MODEL));
+                head.put("Android Version", String.format("%s (%d)", Build.VERSION.RELEASE, Build.VERSION.SDK_INT));
+                head.put("App Version", String.format("%s (%d)", versionName, versionCode));
+                head.put("Kernel", getKernel());
+                head.put("Support Abis", Build.VERSION.SDK_INT >= 21 && Build.SUPPORTED_ABIS != null ? Arrays.toString(Build.SUPPORTED_ABIS): "unknown");
+                head.put("Fingerprint", Build.FINGERPRINT);
+
+                StringBuilder builder = new StringBuilder();
+
+                for (String key : head.keySet()) {
+                    if (builder.length() != 0) builder.append("\n");
+                    builder.append(key);
+                    builder.append(" :    ");
+                    builder.append(head.get(key));
+                }
+
+                builder.append("\n\n");
+                builder.append(Log.getStackTraceString(throwable));
+
+                return builder.toString(); 
+            }
+
+            private void writeLog(String log) {
+                String time = DATE_FORMAT.format(new Date());
+                File file = new File(mCrashDir, "crash_" + time + ".txt");
+                try {
+                    write(file, log.getBytes("UTF-8"));
+                } catch (Throwable e) {
+                    e.printStackTrace();
+                } 
+            }
+
+            private static String getKernel() {
+                try {
+                    return App.toString(new FileInputStream("/proc/version")).trim();
+                } catch (Throwable e) {
+                    return e.getMessage();
+                }
+            }
+        }
+    }
+
+    public static final class CrashActivity extends Activity {
+
+        private String mLog;
+
+        @Override
+        protected void onCreate(Bundle savedInstanceState) {
+            super.onCreate(savedInstanceState);
+
+            setTheme(android.R.style.Theme_DeviceDefault);
+            setTitle("App Crash");
+
+            mLog = getIntent().getStringExtra(Intent.EXTRA_TEXT);
+
+            ScrollView contentView = new ScrollView(this);
+            contentView.setFillViewport(true);
+
+            HorizontalScrollView horizontalScrollView = new HorizontalScrollView(this);
+
+            TextView textView = new TextView(this);
+            int padding = dp2px(16);
+            textView.setPadding(padding, padding, padding, padding);
+            textView.setText(mLog);
+            textView.setTextIsSelectable(true);
+            textView.setTypeface(Typeface.DEFAULT);
+            textView.setLinksClickable(true);
+
+            horizontalScrollView.addView(textView);
+            contentView.addView(horizontalScrollView, ViewGroup.LayoutParams.MATCH_PARENT, ViewGroup.LayoutParams.MATCH_PARENT);
+
+            setContentView(contentView);
+        }
+
+        private void restart() {
+            Intent intent = getPackageManager().getLaunchIntentForPackage(getPackageName());
+            if (intent != null) {
+                intent.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
+                startActivity(intent);
+            }
+            finish();
+            android.os.Process.killProcess(android.os.Process.myPid());
+            System.exit(0);
+        }
+
+        private static int dp2px(float dpValue) {
+            final float scale = Resources.getSystem().getDisplayMetrics().density;
+            return (int) (dpValue * scale + 0.5f);
+        }
+
+        @Override
+        public boolean onCreateOptionsMenu(Menu menu) {
+            menu.add(0, android.R.id.copy, 0, android.R.string.copy)
+                .setShowAsAction(MenuItem.SHOW_AS_ACTION_IF_ROOM);
+            return super.onCreateOptionsMenu(menu);
+        }
+
+        @Override
+        public boolean onOptionsItemSelected(MenuItem item) {
+            switch (item.getItemId()) {
+                case android.R.id.copy:
+                    ClipboardManager cm = (ClipboardManager) getSystemService(Context.CLIPBOARD_SERVICE);
+                    cm.setPrimaryClip(ClipData.newPlainText(getPackageName(), mLog));
+                    return true;
+            }
+            return super.onOptionsItemSelected(item);
+        }
+
+        @Override
+        public void onBackPressed() {
+            restart();
+        }
+    }
+}

autonfc/src/main/java/cc/winboll/studio/autonfc/MainActivity.java

@@ -0,0 +1,180 @@
+package cc.winboll.studio.autonfc;
+
+import android.app.PendingIntent;
+import android.content.ComponentName;
+import android.content.Context;
+import android.content.Intent;
+import android.content.ServiceConnection;
+import android.nfc.NfcAdapter;
+import android.os.Bundle;
+import android.os.IBinder;
+import android.view.Menu;
+import android.view.MenuItem;
+import android.view.View;
+import androidx.appcompat.app.AppCompatActivity;
+import androidx.appcompat.widget.Toolbar;
+import cc.winboll.studio.autonfc.nfc.ActionDialog;
+import cc.winboll.studio.autonfc.nfc.AutoNFCService;
+import cc.winboll.studio.autonfc.nfc.NFCInterfaceActivity;
+import cc.winboll.studio.libappbase.LogActivity;
+import cc.winboll.studio.libappbase.LogUtils;
+
+public class MainActivity extends AppCompatActivity {
+
+    public static final String TAG = "MainActivity";
+
+    private NfcAdapter mNfcAdapter;
+    private PendingIntent mPendingIntent;
+    private AutoNFCService mService;
+    private boolean mBound = false;
+
+    // 服务连接
+    private ServiceConnection mConnection = new ServiceConnection() {
+        @Override
+        public void onServiceConnected(ComponentName name, IBinder service) {
+            AutoNFCService.LocalBinder binder = (AutoNFCService.LocalBinder) service;
+            mService = binder.getService();
+            mBound = true;
+            LogUtils.d(TAG, "onServiceConnected: 服务已绑定");
+
+            // 关键：把 Activity 传给 Service，用于回调
+            mService.attachActivity(MainActivity.this);
+        }
+
+        @Override
+        public void onServiceDisconnected(ComponentName name) {
+            mBound = false;
+            mService = null;
+            LogUtils.d(TAG, "onServiceDisconnected: 服务已断开");
+        }
+    };
+
+    @Override
+    protected void onCreate(Bundle savedInstanceState) {
+        super.onCreate(savedInstanceState);
+        setContentView(R.layout.activity_main);
+
+        Toolbar toolbar = findViewById(R.id.toolbar);
+        setSupportActionBar(toolbar);
+
+        // 初始化 NFC
+        mNfcAdapter = NfcAdapter.getDefaultAdapter(this);
+        Intent nfcIntent = new Intent(this, getClass()).addFlags(Intent.FLAG_ACTIVITY_SINGLE_TOP);
+        mPendingIntent = PendingIntent.getActivity(this, 0, nfcIntent, 0);
+
+        LogUtils.d(TAG, "onCreate() -> NFC 监听已绑定到 MainActivity");
+    }
+
+    @Override
+    protected void onStart() {
+        super.onStart();
+        // 绑定服务
+        Intent intent = new Intent(this, AutoNFCService.class);
+        bindService(intent, mConnection, Context.BIND_AUTO_CREATE);
+        LogUtils.d(TAG, "onStart: 绑定服务");
+    }
+
+    @Override
+    protected void onStop() {
+        super.onStop();
+        // 解绑服务
+        if (mBound) {
+            unbindService(mConnection);
+            mBound = false;
+            LogUtils.d(TAG, "onStop: 解绑服务");
+        }
+    }
+
+    @Override
+    protected void onResume() {
+        super.onResume();
+        LogUtils.d(TAG, "onResume() -> 开启 NFC 前台分发");
+        if (mNfcAdapter != null) {
+            mNfcAdapter.enableForegroundDispatch(this, mPendingIntent, null, null);
+        }
+    }
+
+    @Override
+    protected void onPause() {
+        super.onPause();
+        LogUtils.d(TAG, "onPause() -> 关闭 NFC 前台分发");
+        if (mNfcAdapter != null) {
+            mNfcAdapter.disableForegroundDispatch(this);
+        }
+    }
+
+    // NFC 卡片靠近唯一入口
+    @Override
+    protected void onNewIntent(Intent intent) {
+        super.onNewIntent(intent);
+        LogUtils.d(TAG, "onNewIntent() -> 检测到 NFC 卡片");
+
+        // 把 NFC 事件交给 Service 处理
+        if (mBound && mService != null) {
+            mService.handleNfcIntent(intent);
+        } else {
+            LogUtils.e(TAG, "服务未绑定，无法处理 NFC");
+        }
+    }
+
+    @Override
+    public boolean onCreateOptionsMenu(Menu menu) {
+        getMenuInflater().inflate(R.menu.main_menu, menu);
+        return true;
+    }
+
+    @Override
+    public boolean onOptionsItemSelected(MenuItem item) {
+        int id = item.getItemId();
+
+        if (id == R.id.menu_log) {
+            LogActivity.startLogActivity(this);
+            return true;
+        }
+
+        return super.onOptionsItemSelected(item);
+    }
+
+    public void onNFCInterfaceActivity(View view) {
+        startActivity(new Intent(this, NFCInterfaceActivity.class));
+    }
+
+    // ========================= 【新增】关键方法：由 Service 回调来弹出对话框 =========================
+    /**
+     * Service 解析完 NFC 数据后，回调此方法在 Activity 中弹出对话框
+     */
+    public void showNfcActionDialog(final String nfcData) {
+        LogUtils.d(TAG, "showNfcActionDialog() ->  Activity 存活，安全弹出对话框");
+
+        // Activity 正在运行，直接弹框，绝对不会报 BadTokenException
+        final ActionDialog dialog = new ActionDialog(this);
+        dialog.setNfcData(nfcData);
+        dialog.setButtonClickListener(new ActionDialog.OnButtonClickListener() {
+				@Override
+				public void onBuildClick() {
+					LogUtils.d(TAG, "点击 Build");
+					if (mService != null) {
+						mService.executeTermuxCommand(AutoNFCService.ACTION_BUILD, nfcData);
+					}
+					dialog.dismiss();
+				}
+
+				@Override
+				public void onViewClick() {
+					LogUtils.d(TAG, "点击 View");
+					if (mService != null) {
+						mService.executeTermuxCommand(AutoNFCService.ACTION_BUILD_VIEW, nfcData);
+					}
+					dialog.dismiss();
+				}
+
+				@Override
+				public void onCancelClick() {
+					dialog.dismiss();
+				}
+			});
+
+        dialog.show();
+    }
+}
+

autonfc/src/main/java/cc/winboll/studio/autonfc/models/NfcTermuxCmd.java

@@ -0,0 +1,66 @@
+package cc.winboll.studio.autonfc.models;
+
+/**
+ * @Author 豆包&ZhanGSKen<zhangsken@qq.com>
+ * @Date 2026/03/16 09:38
+ */
+public class NfcTermuxCmd {
+
+    private String script;        // 要执行的预制脚本名（如 auth.sh）
+    private String[] args;         // 脚本参数
+    private String workDir;       // 工作目录
+    private boolean background;   // 是否后台执行
+    private String resultDir;     // 结果输出目录（可为 null）
+
+    public NfcTermuxCmd() {
+    }
+
+    public NfcTermuxCmd(String script, String[] args, String workDir, boolean background, String resultDir) {
+        this.script = script;
+        this.args = args;
+        this.workDir = workDir;
+        this.background = background;
+        this.resultDir = resultDir;
+    }
+
+    public String getScript() {
+        return script;
+    }
+
+    public void setScript(String script) {
+        this.script = script;
+    }
+
+    public String[] getArgs() {
+        return args;
+    }
+
+    public void setArgs(String[] args) {
+        this.args = args;
+    }
+
+    public String getWorkDir() {
+        return workDir;
+    }
+
+    public void setWorkDir(String workDir) {
+        this.workDir = workDir;
+    }
+
+    public boolean isBackground() {
+        return background;
+    }
+
+    public void setBackground(boolean background) {
+        this.background = background;
+    }
+
+    public String getResultDir() {
+        return resultDir;
+    }
+
+    public void setResultDir(String resultDir) {
+        this.resultDir = resultDir;
+    }
+}
+

autonfc/src/main/java/cc/winboll/studio/autonfc/nfc/ActionDialog.java

@@ -0,0 +1,123 @@
+package cc.winboll.studio.autonfc.nfc;
+
+import android.app.Dialog;
+import android.content.Context;
+import android.view.View;
+import android.widget.Button;
+import android.widget.LinearLayout;
+
+import cc.winboll.studio.autonfc.R;
+import cc.winboll.studio.libappbase.LogUtils;
+
+/**
+ * 自定义对话框类，用于与用户交互，展示 NFC 相关操作选项
+ * 兼容 Java 7 语法
+ *
+ * @author 豆包&ZhanGSKen
+ * @create 2025-08-15
+ * @lastModify 2026-03-17
+ */
+public class ActionDialog extends Dialog {
+
+    private static final String TAG = "ActionDialog";
+    private String mNfcData;
+    private OnButtonClickListener mClickListener;
+
+    /**
+     * 构造函数
+     */
+    public ActionDialog(Context context) {
+        super(context);
+        initDialog();
+    }
+
+    /**
+     * 设置 NFC 数据
+     */
+    public void setNfcData(String nfcData) {
+        this.mNfcData = nfcData;
+        LogUtils.d(TAG, "setNfcData() -> " + nfcData);
+    }
+
+    /**
+     * 设置点击监听
+     */
+    public void setButtonClickListener(OnButtonClickListener listener) {
+        this.mClickListener = listener;
+    }
+
+    /**
+     * 初始化布局
+     */
+    private void initDialog() {
+        setTitle("请选择操作");
+
+        LinearLayout layout = new LinearLayout(getContext());
+        layout.setOrientation(LinearLayout.VERTICAL);
+        layout.setPadding(20, 20, 20, 20);
+
+        addButtons(layout);
+
+        setContentView(layout);
+    }
+
+    /**
+     * 添加按钮
+     */
+    private void addButtons(LinearLayout layout) {
+        // Build 按钮
+        Button btnBuild = createButton("Build", new View.OnClickListener() {
+				@Override
+				public void onClick(View v) {
+					LogUtils.d(TAG, "点击 Build");
+					if (mClickListener != null) {
+						mClickListener.onBuildClick();
+					}
+				}
+			});
+        layout.addView(btnBuild);
+
+        // View 按钮
+        Button btnView = createButton("View", new View.OnClickListener() {
+				@Override
+				public void onClick(View v) {
+					LogUtils.d(TAG, "点击 View");
+					if (mClickListener != null) {
+						mClickListener.onViewClick();
+					}
+				}
+			});
+        layout.addView(btnView);
+
+        // 取消按钮
+        Button btnCancel = createButton("Cancel", new View.OnClickListener() {
+				@Override
+				public void onClick(View v) {
+					LogUtils.d(TAG, "点击 Cancel");
+					dismiss();
+				}
+			});
+        layout.addView(btnCancel);
+    }
+
+    /**
+     * 创建按钮
+     */
+    private Button createButton(String text, View.OnClickListener listener) {
+        Button button = new Button(getContext());
+        button.setText(text);
+        button.setPadding(10, 10, 10, 10);
+        button.setOnClickListener(listener);
+        return button;
+    }
+
+    /**
+     * 回调接口
+     */
+    public interface OnButtonClickListener {
+        void onBuildClick();
+        void onViewClick();
+        void onCancelClick();
+    }
+}
+

autonfc/src/main/java/cc/winboll/studio/autonfc/nfc/AutoNFCService.java

@@ -0,0 +1,202 @@
+package cc.winboll.studio.autonfc.nfc;
+
+import android.app.Service;
+import android.content.Context;
+import android.content.Intent;
+import android.nfc.NdefMessage;
+import android.nfc.NdefRecord;
+import android.nfc.NfcAdapter;
+import android.nfc.Tag;
+import android.nfc.tech.Ndef;
+import android.os.Binder;
+import android.os.IBinder;
+
+import cc.winboll.studio.autonfc.MainActivity;
+import cc.winboll.studio.libappbase.LogUtils;
+import cc.winboll.studio.libappbase.ToastUtils;
+
+import java.nio.charset.Charset;
+import java.util.Arrays;
+
+public class AutoNFCService extends Service {
+
+    public static final String TAG = "AutoNFCService";
+
+    // ================= 已修改：更新为 Beta 包名 =================
+    public static final String ACTION_BUILD = "cc.winboll.studio.winboll.termux.NfcTermuxBridgeActivity.ACTION_BUILD";
+    public static final String ACTION_BUILD_VIEW = "cc.winboll.studio.winboll.termux.NfcTermuxBridgeActivity.ACTION_BUILD_VIEW";
+
+    private final IBinder mBinder = new LocalBinder();
+    private String mNfcData;
+    private MainActivity mActivity; // 持有 Activity 引用，用于回调
+
+    // ========================= 生命周期 =========================
+    @Override
+    public void onCreate() {
+        super.onCreate();
+        LogUtils.d(TAG, "onCreate() -> 服务创建");
+        // 移除：startForeground(NOTIFICATION_ID, buildNotification());
+    }
+
+    @Override
+    public void onDestroy() {
+        super.onDestroy();
+        LogUtils.d(TAG, "onDestroy() -> 服务已停止");
+        mActivity = null; // 释放引用
+    }
+
+    // ========================= 服务绑定 =========================
+    @Override
+    public IBinder onBind(Intent intent) {
+        LogUtils.d(TAG, "onBind() -> 服务被绑定");
+        return mBinder;
+    }
+
+    @Override
+    public boolean onUnbind(Intent intent) {
+        LogUtils.d(TAG, "onUnbind() -> 服务解绑");
+        // 移除：stopForeground(true);
+        stopSelf();
+        return super.onUnbind(intent);
+    }
+
+    // ========================= 对外暴露方法 =========================
+    /**
+     * 绑定 Activity，用于回调显示对话框
+     */
+    public void attachActivity(MainActivity activity) {
+        this.mActivity = activity;
+    }
+
+    /**
+     * 处理 NFC 意图
+     */
+    public void handleNfcIntent(Intent intent) {
+        LogUtils.d(TAG, "handleNfcIntent() -> 开始处理");
+
+        if (intent == null) {
+            LogUtils.e(TAG, "handleNfcIntent() -> 参数 intent 为空");
+            return;
+        }
+
+        String action = intent.getAction();
+        LogUtils.d(TAG, "handleNfcIntent() -> Action = " + action);
+
+        if (NfcAdapter.ACTION_NDEF_DISCOVERED.equals(action)
+			|| NfcAdapter.ACTION_TECH_DISCOVERED.equals(action)
+			|| NfcAdapter.ACTION_TAG_DISCOVERED.equals(action)) {
+
+            LogUtils.d(TAG, "handleNfcIntent() -> 匹配 NFC 动作");
+
+            Tag tag = intent.getParcelableExtra(NfcAdapter.EXTRA_TAG);
+            if (tag == null) {
+                LogUtils.e(TAG, "handleNfcIntent() -> Tag 为空");
+                return;
+            }
+
+            LogUtils.d(TAG, "handleNfcIntent() -> Tag ID = " + bytesToHexString(tag.getId()));
+            LogUtils.d(TAG, "handleNfcIntent() -> Tech List = " + Arrays.toString(tag.getTechList()));
+
+            parseNdefData(tag);
+        }
+    }
+
+    // ========================= 内部业务 =========================
+    private void parseNdefData(Tag tag) {
+        LogUtils.d(TAG, "parseNdefData() -> 开始解析");
+
+        if (tag == null) return;
+
+        Ndef ndef = Ndef.get(tag);
+        if (ndef == null) {
+            LogUtils.e(TAG, "parseNdefData() -> 不支持 NDEF 格式");
+            return;
+        }
+
+        try {
+            ndef.connect();
+            NdefMessage msg = ndef.getNdefMessage();
+
+            if (msg == null || msg.getRecords() == null || msg.getRecords().length == 0) {
+                LogUtils.w(TAG, "parseNdefData() -> 卡片无数据");
+                return;
+            }
+
+            NdefRecord record = msg.getRecords()[0];
+            byte[] payload = record.getPayload();
+
+            int langLen = payload[0] & 0x3F;
+            int start = 1 + langLen;
+
+            if (start < payload.length) {
+                mNfcData = new String(payload, start, payload.length - start, Charset.forName("UTF-8"));
+                LogUtils.d(TAG, "parseNdefData() -> 读卡成功: " + mNfcData);
+
+                // 关键：回调给 Activity 弹框，此时 Activity 一定是存活状态
+                if (mActivity != null) {
+                    mActivity.showNfcActionDialog(mNfcData);
+                }
+            }
+
+        } catch (Exception e) {
+            LogUtils.e(TAG, "parseNdefData() -> 读取失败", e);
+        } finally {
+            try {
+                ndef.close();
+            } catch (Exception e) {
+                // 忽略关闭异常
+            }
+        }
+    }
+
+    /**
+     * 执行 Termux 命令
+     */
+    public void executeTermuxCommand(String action, String nfcData) {
+        LogUtils.d(TAG, "executeTermuxCommand() -> 开始执行");
+
+        if (nfcData == null || nfcData.isEmpty()) {
+            ToastUtils.show("数据错误");
+            return;
+        }
+
+        try {
+            LogUtils.d(TAG, "executeTermuxCommand() -> 发送指令: " + nfcData);
+
+            Intent bridgeIntent = new Intent(action);
+
+            // ================= 已修改：使用 Beta 包名 =================
+            bridgeIntent.setClassName(
+                "cc.winboll.studio.winboll.beta",
+                "cc.winboll.studio.winboll.termux.NfcTermuxBridgeActivity"
+            );
+
+            bridgeIntent.putExtra(Intent.EXTRA_TEXT, nfcData);
+            bridgeIntent.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
+
+            startActivity(bridgeIntent);
+            ToastUtils.show("指令已发送");
+        } catch (Exception e) {
+            LogUtils.e(TAG, "executeTermuxCommand() -> 发送失败", e);
+            ToastUtils.show("发送失败");
+        }
+    }
+
+    // ========================= 工具方法 =========================
+    private String bytesToHexString(byte[] bytes) {
+        if (bytes == null || bytes.length == 0) return "";
+        StringBuilder sb = new StringBuilder();
+        for (byte b : bytes) {
+            sb.append(String.format("%02X", b));
+        }
+        return sb.toString();
+    }
+
+    // ========================= Binder =========================
+    public class LocalBinder extends Binder {
+        public AutoNFCService getService() {
+            return AutoNFCService.this;
+        }
+    }
+}
+

autonfc/src/main/java/cc/winboll/studio/autonfc/nfc/NFCInterfaceActivity.java

@@ -0,0 +1,230 @@
+package cc.winboll.studio.autonfc.nfc;
+
+import android.app.Activity;
+import android.app.PendingIntent;
+import android.content.Intent;
+import android.nfc.NfcAdapter;
+import android.nfc.Tag;
+import android.os.Bundle;
+import android.view.View;
+import android.widget.EditText;
+import android.widget.TextView;
+import android.widget.Toast;
+import cc.winboll.studio.autonfc.R;
+import cc.winboll.studio.autonfc.models.NfcTermuxCmd;
+import cc.winboll.studio.libappbase.LogUtils;
+import java.text.SimpleDateFormat;
+import java.util.Date;
+import java.util.Locale;
+
+public class NFCInterfaceActivity extends Activity {
+
+    public static final String TAG = "NFCInterfaceActivity";
+
+    private EditText et_script;
+    private EditText et_args;
+    private EditText et_workDir;
+    private EditText et_background;
+    private EditText et_resultDir;
+
+    private TextView tvResult;
+    private TextView tvStatus;
+
+    private NfcAdapter mNfcAdapter;
+    private PendingIntent mNfcPendingIntent;
+    private Tag mCurrentTag;
+
+    @Override
+    protected void onCreate(Bundle savedInstanceState) {
+        super.onCreate(savedInstanceState);
+        setContentView(R.layout.activity_nfc_interface);
+        initView();
+        initNfc();
+    }
+
+    private void initView() {
+        et_script = findViewById(R.id.et_script);
+        et_args = findViewById(R.id.et_args);
+        et_workDir = findViewById(R.id.et_workDir);
+        et_background = findViewById(R.id.et_background);
+        et_resultDir = findViewById(R.id.et_resultDir);
+
+        tvResult = findViewById(R.id.tv_result);
+        tvStatus = findViewById(R.id.tv_status);
+    }
+
+    private void initNfc() {
+        mNfcAdapter = NfcAdapter.getDefaultAdapter(this);
+
+        if (mNfcAdapter == null) {
+            tvStatus.setText("设备不支持NFC");
+            return;
+        }
+        if (!mNfcAdapter.isEnabled()) {
+            tvStatus.setText("请开启NFC");
+            return;
+        }
+
+        Intent nfcIntent = new Intent(this, getClass()).addFlags(Intent.FLAG_ACTIVITY_SINGLE_TOP);
+        mNfcPendingIntent = PendingIntent.getActivity(this, 0, nfcIntent, PendingIntent.FLAG_UPDATE_CURRENT);
+
+        tvStatus.setText("NFC已启动，等待卡片靠近");
+    }
+
+    @Override
+    protected void onResume() {
+        super.onResume();
+        if (mNfcAdapter != null && mNfcAdapter.isEnabled()) {
+            mNfcAdapter.enableForegroundDispatch(this, mNfcPendingIntent, null, null);
+        }
+    }
+
+    @Override
+    protected void onPause() {
+        super.onPause();
+        if (mNfcAdapter != null) {
+            mNfcAdapter.disableForegroundDispatch(this);
+        }
+        mCurrentTag = null;
+    }
+
+    @Override
+    protected void onNewIntent(Intent intent) {
+        super.onNewIntent(intent);
+        mCurrentTag = intent.getParcelableExtra(NfcAdapter.EXTRA_TAG);
+        if (mCurrentTag == null) return;
+
+        tvStatus.setText("卡片已连接，解析中...");
+        readNfc();
+    }
+
+    // -------------------------------------------------------------------------
+    // 读取 NFC（完全委托给工具类）
+    // -------------------------------------------------------------------------
+    private void readNfc() {
+        try {
+            NfcTermuxCmd cmd = NfcUtils.readTag(mCurrentTag);
+            if (cmd == null) {
+                tvStatus.setText("读取成功：标签为空");
+                tvResult.setText("");
+                // 清空窗体
+                clearUiFields();
+                return;
+            }
+
+            // 核心改动：读取成功后，同时更新详情显示 和 窗体输入框
+            updateUiWithCmd(cmd);
+
+        } catch (Exception e) {
+            LogUtils.e(TAG, "readNfc 失败", e);
+            tvStatus.setText("读取失败：" + e.getMessage());
+            // 出错时清空窗体
+            clearUiFields();
+        }
+    }
+
+    // -------------------------------------------------------------------------
+    // 新增：根据读取到的 Cmd 填充 UI（详情 + 窗体）
+    // -------------------------------------------------------------------------
+    private void updateUiWithCmd(NfcTermuxCmd cmd) {
+        if (cmd == null) return;
+
+        String time = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss", Locale.CHINA).format(new Date());
+        String show = "【读取时间】 " + time + "\n\n"
+			+ "【解析结果】\n"
+			+ "script:    " + cmd.getScript() + "\n"
+			+ "args:      " + (cmd.getArgs() != null ? String.join(", ", cmd.getArgs()) : "[]") + "\n"
+			+ "workDir:   " + cmd.getWorkDir() + "\n"
+			+ "background: " + cmd.isBackground() + "\n"
+			+ "resultDir: " + cmd.getResultDir();
+
+        tvResult.setText(show);
+        tvStatus.setText("读取成功！");
+
+        // 👇 关键逻辑：自动填入窗体（每次读取后都会覆盖输入框）
+        et_script.setText(cmd.getScript() != null ? cmd.getScript() : "");
+        et_args.setText(cmd.getArgs() != null ? String.join(",", cmd.getArgs()) : "");
+        et_workDir.setText(cmd.getWorkDir() != null ? cmd.getWorkDir() : "");
+        et_background.setText(String.valueOf(cmd.isBackground()));
+        et_resultDir.setText(cmd.getResultDir() != null ? cmd.getResultDir() : "");
+    }
+
+    // -------------------------------------------------------------------------
+    // 辅助：清空所有输入框
+    // -------------------------------------------------------------------------
+    private void clearUiFields() {
+        et_script.setText("");
+        et_args.setText("");
+        et_workDir.setText("");
+        et_background.setText("");
+        et_resultDir.setText("");
+    }
+
+    // -------------------------------------------------------------------------
+    // 写入按钮（委托给工具类）
+    // -------------------------------------------------------------------------
+    public void onWriteClick(View view) {
+        if (mCurrentTag == null) {
+            showToast("请先靠近卡片");
+            return;
+        }
+
+        try {
+            NfcTermuxCmd cmd = buildCmdFromUI();
+            NfcUtils.writeTag(mCurrentTag, cmd);
+
+            tvStatus.setText("写入成功！");
+            showToast("写入成功");
+            readNfc(); // 写入后重读，此时会自动填入窗体
+
+        } catch (Exception e) {
+            LogUtils.e(TAG, "写入失败", e);
+            tvStatus.setText("写入失败：" + e.getMessage());
+            showToast("写入失败");
+        }
+    }
+
+    // -------------------------------------------------------------------------
+    // 填充调试数据
+    // -------------------------------------------------------------------------
+    public void onFillTestDataClick(View view) {
+        String testJson = "{\"script\":\"BuildWinBoLLProject.sh\",\"args\":[\"DebugTemp\"],\"workDir\":null,\"background\":true,\"resultDir\":null}";
+        try {
+            NfcTermuxCmd cmd = NfcUtils.jsonToCmd(testJson);
+            et_script.setText(cmd.getScript());
+            et_args.setText(cmd.getArgs() != null ? String.join(",", cmd.getArgs()) : "");
+            et_workDir.setText(cmd.getWorkDir() != null ? cmd.getWorkDir() : "");
+            et_background.setText(String.valueOf(cmd.isBackground()));
+            et_resultDir.setText(cmd.getResultDir() != null ? cmd.getResultDir() : "");
+
+            showToast("调试数据已填入");
+        } catch (Exception e) {
+            showToast("解析失败");
+        }
+    }
+
+    // -------------------------------------------------------------------------
+    // 从 UI 构建 NfcTermuxCmd
+    // -------------------------------------------------------------------------
+    private NfcTermuxCmd buildCmdFromUI() {
+        String script = et_script.getText().toString().trim();
+        String argsStr = et_args.getText().toString().trim();
+        String workDir = et_workDir.getText().toString().trim();
+        String bgStr = et_background.getText().toString().trim();
+        String resultDir = et_resultDir.getText().toString().trim();
+
+        NfcTermuxCmd cmd = new NfcTermuxCmd();
+        cmd.setScript(script);
+        cmd.setArgs(argsStr.isEmpty() ? new String[0] : argsStr.split(","));
+        cmd.setWorkDir(workDir.isEmpty() ? null : workDir);
+        cmd.setBackground("true".equalsIgnoreCase(bgStr));
+        cmd.setResultDir(resultDir.isEmpty() ? null : resultDir);
+
+        return cmd;
+    }
+
+    private void showToast(String msg) {
+        Toast.makeText(this, msg, Toast.LENGTH_SHORT).show();
+    }
+}
+

autonfc/src/main/java/cc/winboll/studio/autonfc/nfc/NfcStateMonitor.java

@@ -0,0 +1,78 @@
+package cc.winboll.studio.autonfc.nfc;
+
+import java.util.HashMap;
+import java.util.Map;
+
+public class NfcStateMonitor {
+    private static Map<String, OnNfcStateListener> sListenerMap = new HashMap<>();
+    private static boolean sIsRunning = false;
+
+    public static void startMonitor() {
+        if (sIsRunning) return;
+        sListenerMap = new HashMap<>();
+        sIsRunning = true;
+    }
+
+    public static void stopMonitor() {
+        if (!sIsRunning) return;
+        sIsRunning = false;
+        if (sListenerMap != null) {
+            sListenerMap.clear();
+            sListenerMap = null;
+        }
+    }
+
+    // 你原来的方法名：registerListener
+    public static void registerListener(String key, OnNfcStateListener listener) {
+        if (!sIsRunning || listener == null) return;
+        sListenerMap.put(key, listener);
+    }
+
+    public static void unregisterListener(String key) {
+        if (!sIsRunning || key == null) return;
+        sListenerMap.remove(key);
+    }
+
+    public static void notifyNfcConnected() {
+        if (!sIsRunning) return;
+        for (OnNfcStateListener l : sListenerMap.values()) {
+            l.onNfcConnected();
+        }
+    }
+
+    public static void notifyNfcDisconnected() {
+        if (!sIsRunning) return;
+        for (OnNfcStateListener l : sListenerMap.values()) {
+            l.onNfcDisconnected();
+        }
+    }
+
+    public static void notifyReadSuccess(String data) {
+        if (!sIsRunning) return;
+        for (OnNfcStateListener l : sListenerMap.values()) {
+            l.onNfcReadSuccess(data);
+        }
+    }
+
+    public static void notifyReadFail(String error) {
+        if (!sIsRunning) return;
+        for (OnNfcStateListener l : sListenerMap.values()) {
+            l.onNfcReadFail(error);
+        }
+    }
+
+    public static void notifyWriteSuccess() {
+        if (!sIsRunning) return;
+        for (OnNfcStateListener l : sListenerMap.values()) {
+            l.onNfcWriteSuccess();
+        }
+    }
+
+    public static void notifyWriteFail(String error) {
+        if (!sIsRunning) return;
+        for (OnNfcStateListener l : sListenerMap.values()) {
+            l.onNfcWriteFail(error);
+        }
+    }
+}
+

autonfc/src/main/java/cc/winboll/studio/autonfc/nfc/NfcUtils.java

@@ -0,0 +1,136 @@
+package cc.winboll.studio.autonfc.nfc;
+
+/**
+ * @Author 豆包&ZhanGSKen<zhangsken@qq.com>
+ * @Date 2026/03/16 14:26
+ */
+import android.nfc.NdefMessage;
+import android.nfc.NdefRecord;
+import android.nfc.Tag;
+import android.nfc.tech.Ndef;
+import com.google.gson.Gson;
+import com.google.gson.JsonSyntaxException;
+import cc.winboll.studio.autonfc.models.NfcTermuxCmd;
+import cc.winboll.studio.libappbase.LogUtils;
+import java.nio.charset.Charset;
+import java.util.Locale;
+
+public class NfcUtils {
+
+    public static final String TAG = "NfcUtils";
+    private static Gson sGson = new Gson();
+
+    // -------------------------------------------------------------------------
+    // 读取 NFC 标签并解析为 NfcTermuxCmd
+    // -------------------------------------------------------------------------
+    public static NfcTermuxCmd readTag(Tag tag) throws Exception {
+        if (tag == null) {
+            LogUtils.e(TAG, "readTag: tag is null");
+            return null;
+        }
+
+        Ndef ndef = Ndef.get(tag);
+        if (ndef == null) {
+            LogUtils.e(TAG, "readTag: 不支持 NDEF");
+            return null;
+        }
+
+        try {
+            ndef.connect();
+            NdefMessage msg = ndef.getNdefMessage();
+            if (msg == null) return null;
+
+            NdefRecord[] records = msg.getRecords();
+            if (records == null || records.length == 0) return null;
+
+            byte[] payload = records[0].getPayload();
+            int status = payload[0] & 0xFF;
+            int langLen = status & 0x3F;
+            int start = 1 + langLen;
+
+            if (start >= payload.length) return null;
+
+            String json = new String(payload, start, payload.length - start, Charset.forName("UTF-8"));
+            LogUtils.d(TAG, "readTag: 提取 JSON -> " + json);
+
+            return sGson.fromJson(json, NfcTermuxCmd.class);
+        } finally {
+            if (ndef != null && ndef.isConnected()) {
+                ndef.close();
+            }
+        }
+    }
+
+    // -------------------------------------------------------------------------
+    // 写入 NfcTermuxCmd 到 NFC 标签
+    // -------------------------------------------------------------------------
+    public static void writeTag(Tag tag, NfcTermuxCmd cmd) throws Exception {
+        if (tag == null) throw new Exception("tag is null");
+
+        String json = sGson.toJson(cmd);
+        writeJson(tag, json);
+    }
+
+    // -------------------------------------------------------------------------
+    // 写入原始 JSON 字符串到 NFC
+    // -------------------------------------------------------------------------
+    public static void writeJson(Tag tag, String json) throws Exception {
+        if (tag == null) throw new Exception("tag is null");
+
+        Ndef ndef = Ndef.get(tag);
+        if (ndef == null) throw new Exception("标签不支持 NDEF");
+
+        try {
+            ndef.connect();
+            int maxSize = ndef.getMaxSize();
+            int realSize = json.getBytes(Charset.forName("UTF-8")).length;
+
+            if (realSize > maxSize) {
+                throw new Exception("数据过大 (" + realSize + ") > 容量 (" + maxSize + ")");
+            }
+
+            NdefRecord record = createTextRecord(json, true);
+            NdefMessage msg = new NdefMessage(new NdefRecord[]{record});
+
+            ndef.writeNdefMessage(msg);
+            LogUtils.d(TAG, "writeJson: 写入成功");
+        } finally {
+            if (ndef != null && ndef.isConnected()) {
+                ndef.close();
+            }
+        }
+    }
+
+    // -------------------------------------------------------------------------
+    // 创建 NFC 文本记录
+    // -------------------------------------------------------------------------
+    public static NdefRecord createTextRecord(String text, boolean isUtf8) {
+        byte[] langBytes = "en".getBytes(Charset.forName("US-ASCII"));
+        byte[] textBytes = text.getBytes(Charset.forName(isUtf8 ? "UTF-8" : "UTF-16"));
+
+        int status = isUtf8 ? 0 : 0x80;
+        status |= langBytes.length & 0x3F;
+
+        byte[] data = new byte[1 + langBytes.length + textBytes.length];
+        data[0] = (byte) status;
+        System.arraycopy(langBytes, 0, data, 1, langBytes.length);
+        System.arraycopy(textBytes, 0, data, 1 + langBytes.length, textBytes.length);
+
+        return new NdefRecord(NdefRecord.TNF_WELL_KNOWN, NdefRecord.RTD_TEXT, new byte[0], data);
+    }
+
+    // -------------------------------------------------------------------------
+    // 辅助：JSON -> NfcTermuxCmd
+    // -------------------------------------------------------------------------
+    public static NfcTermuxCmd jsonToCmd(String json) throws JsonSyntaxException {
+        return sGson.fromJson(json, NfcTermuxCmd.class);
+    }
+
+    // -------------------------------------------------------------------------
+    // 辅助：NfcTermuxCmd -> JSON
+    // -------------------------------------------------------------------------
+    public static String cmdToJson(NfcTermuxCmd cmd) {
+        return sGson.toJson(cmd);
+    }
+}
+

autonfc/src/main/java/cc/winboll/studio/autonfc/nfc/OnNfcStateListener.java

@@ -0,0 +1,11 @@
+package cc.winboll.studio.autonfc.nfc;
+
+public interface OnNfcStateListener {
+    void onNfcConnected(); // 无参数！
+    void onNfcDisconnected();
+    void onNfcReadSuccess(String data);
+    void onNfcReadFail(String error);
+    void onNfcWriteSuccess();
+    void onNfcWriteFail(String error);
+}
+

autonfc/src/main/res/drawable-v24/ic_launcher_foreground.xml

@@ -0,0 +1,34 @@
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+    xmlns:aapt="http://schemas.android.com/aapt"
+    android:width="108dp"
+    android:height="108dp"
+    android:viewportHeight="108"
+    android:viewportWidth="108">
+    <path
+        android:fillType="evenOdd"
+        android:pathData="M32,64C32,64 38.39,52.99 44.13,50.95C51.37,48.37 70.14,49.57 70.14,49.57L108.26,87.69L108,109.01L75.97,107.97L32,64Z"
+        android:strokeColor="#00000000"
+        android:strokeWidth="1">
+        <aapt:attr name="android:fillColor">
+            <gradient
+                android:endX="78.5885"
+                android:endY="90.9159"
+                android:startX="48.7653"
+                android:startY="61.0927"
+                android:type="linear">
+                <item
+                    android:color="#44000000"
+                    android:offset="0.0" />
+                <item
+                    android:color="#00000000"
+                    android:offset="1.0" />
+            </gradient>
+        </aapt:attr>
+    </path>
+    <path
+        android:fillColor="#FFFFFF"
+        android:fillType="nonZero"
+        android:pathData="M66.94,46.02L66.94,46.02C72.44,50.07 76,56.61 76,64L32,64C32,56.61 35.56,50.11 40.98,46.06L36.18,41.19C35.45,40.45 35.45,39.3 36.18,38.56C36.91,37.81 38.05,37.81 38.78,38.56L44.25,44.05C47.18,42.57 50.48,41.71 54,41.71C57.48,41.71 60.78,42.57 63.68,44.05L69.11,38.56C69.84,37.81 70.98,37.81 71.71,38.56C72.44,39.3 72.44,40.45 71.71,41.19L66.94,46.02ZM62.94,56.92C64.08,56.92 65,56.01 65,54.88C65,53.76 64.08,52.85 62.94,52.85C61.8,52.85 60.88,53.76 60.88,54.88C60.88,56.01 61.8,56.92 62.94,56.92ZM45.06,56.92C46.2,56.92 47.13,56.01 47.13,54.88C47.13,53.76 46.2,52.85 45.06,52.85C43.92,52.85 43,53.76 43,54.88C43,56.01 43.92,56.92 45.06,56.92Z"
+        android:strokeColor="#00000000"
+        android:strokeWidth="1" />
+</vector>

autonfc/src/main/res/drawable/ic_launcher_background.xml

@@ -0,0 +1,170 @@
+<?xml version="1.0" encoding="utf-8"?>
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+    android:width="108dp"
+    android:height="108dp"
+    android:viewportHeight="108"
+    android:viewportWidth="108">
+    <path
+        android:fillColor="#26A69A"
+        android:pathData="M0,0h108v108h-108z" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M9,0L9,108"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M19,0L19,108"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M29,0L29,108"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M39,0L39,108"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M49,0L49,108"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M59,0L59,108"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M69,0L69,108"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M79,0L79,108"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M89,0L89,108"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M99,0L99,108"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M0,9L108,9"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M0,19L108,19"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M0,29L108,29"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M0,39L108,39"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M0,49L108,49"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M0,59L108,59"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M0,69L108,69"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M0,79L108,79"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M0,89L108,89"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M0,99L108,99"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M19,29L89,29"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M19,39L89,39"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M19,49L89,49"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M19,59L89,59"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M19,69L89,69"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M19,79L89,79"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M29,19L29,89"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M39,19L39,89"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M49,19L49,89"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M59,19L59,89"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M69,19L69,89"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+    <path
+        android:fillColor="#00000000"
+        android:pathData="M79,19L79,89"
+        android:strokeColor="#33FFFFFF"
+        android:strokeWidth="0.8" />
+</vector>

autonfc/src/main/res/layout/activity_main.xml

@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<LinearLayout
+	xmlns:android="http://schemas.android.com/apk/res/android"
+	xmlns:app="http://schemas.android.com/apk/res-auto"
+	android:layout_width="match_parent"
+	android:layout_height="match_parent"
+	android:orientation="vertical">
+
+	<com.google.android.material.appbar.AppBarLayout
+		android:layout_width="match_parent"
+		android:layout_height="wrap_content"
+		android:theme="@style/ThemeOverlay.AppCompat.Dark.ActionBar">
+
+		<androidx.appcompat.widget.Toolbar
+			android:id="@+id/toolbar"
+			android:layout_width="match_parent"
+			android:layout_height="?attr/actionBarSize"
+			app:popupTheme="@style/ThemeOverlay.AppCompat.Light"/>
+
+	</com.google.android.material.appbar.AppBarLayout>
+
+	<LinearLayout
+		android:orientation="vertical"
+		android:layout_width="match_parent"
+		android:layout_height="0dp"
+		android:layout_weight="1.0"
+		android:gravity="center_vertical|center_horizontal">
+
+		<Button
+			android:layout_width="wrap_content"
+			android:layout_height="wrap_content"
+			android:text="NFC Interface Activity"
+			android:onClick="onNFCInterfaceActivity"/>
+
+	</LinearLayout>
+
+</LinearLayout>
+

autonfc/src/main/res/layout/activity_nfc_interface.xml

@@ -0,0 +1,104 @@
+<?xml version="1.0" encoding="utf-8"?>
+<ScrollView
+	xmlns:android="http://schemas.android.com/apk/res/android"
+	android:layout_width="match_parent"
+	android:layout_height="match_parent">
+
+	<LinearLayout
+		android:layout_width="match_parent"
+		android:layout_height="wrap_content"
+		android:orientation="vertical"
+		android:padding="16dp">
+
+		<TextView
+			android:layout_width="wrap_content"
+			android:layout_height="wrap_content"
+			android:text="脚本名称 script:"/>
+
+		<EditText
+			android:id="@+id/et_script"
+			android:layout_width="match_parent"
+			android:layout_height="wrap_content"
+			android:hint="如 auth.sh"/>
+
+		<TextView
+			android:layout_width="wrap_content"
+			android:layout_height="wrap_content"
+			android:layout_marginTop="8dp"
+			android:text="参数 args (逗号分隔):"/>
+
+		<EditText
+			android:id="@+id/et_args"
+			android:layout_width="match_parent"
+			android:layout_height="wrap_content"
+			android:hint="user1,pass123"/>
+
+		<TextView
+			android:layout_width="wrap_content"
+			android:layout_height="wrap_content"
+			android:layout_marginTop="8dp"
+			android:text="工作目录 workDir:"/>
+
+		<EditText
+			android:id="@+id/et_workDir"
+			android:layout_width="match_parent"
+			android:layout_height="wrap_content"
+			android:hint="/data/data/com.termux/files/home"/>
+
+		<TextView
+			android:layout_width="wrap_content"
+			android:layout_height="wrap_content"
+			android:layout_marginTop="8dp"
+			android:text="后台执行 background (true/false):"/>
+
+		<EditText
+			android:id="@+id/et_background"
+			android:layout_width="match_parent"
+			android:layout_height="wrap_content"
+			android:text="true"/>
+
+		<TextView
+			android:layout_width="wrap_content"
+			android:layout_height="wrap_content"
+			android:layout_marginTop="8dp"
+			android:text="结果目录 resultDir:"/>
+
+		<EditText
+			android:id="@+id/et_resultDir"
+			android:layout_width="match_parent"
+			android:layout_height="wrap_content"
+			android:hint="/data/data/com.termux/files/log"/>
+
+		<Button
+			android:layout_width="match_parent"
+			android:layout_height="wrap_content"
+			android:layout_marginTop="16dp"
+			android:onClick="onFillTestDataClick"
+			android:text="填入调试数据 (BuildWinBoLLProject.sh)"/>
+
+		<Button
+			android:layout_width="match_parent"
+			android:layout_height="wrap_content"
+			android:layout_marginTop="8dp"
+			android:onClick="onWriteClick"
+			android:text="写入 NFC (NfcTermuxCmd JSON)"/>
+
+		<TextView
+			android:id="@+id/tv_status"
+			android:layout_width="match_parent"
+			android:layout_height="wrap_content"
+			android:layout_marginTop="16dp"
+			android:text="状态"/>
+
+		<TextView
+			android:id="@+id/tv_result"
+			android:layout_width="match_parent"
+			android:layout_height="wrap_content"
+			android:layout_marginTop="16dp"
+			android:scrollbars="vertical"
+			android:textSize="14sp"/>
+
+	</LinearLayout>
+
+</ScrollView>
+

autonfc/src/main/res/menu/main_menu.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<menu xmlns:android="http://schemas.android.com/apk/res/android">
+    <item
+        android:id="@+id/menu_log"
+        android:title="启动日志"/>
+</menu>

autonfc/src/main/res/mipmap-anydpi-v26/ic_launcher.xml

@@ -0,0 +1,5 @@
+<?xml version="1.0" encoding="utf-8"?>
+<adaptive-icon xmlns:android="http://schemas.android.com/apk/res/android">
+    <background android:drawable="@drawable/ic_launcher_background" />
+    <foreground android:drawable="@drawable/ic_launcher_foreground" />
+</adaptive-icon>

autonfc/src/main/res/mipmap-anydpi-v26/ic_launcher_round.xml

@@ -0,0 +1,5 @@
+<?xml version="1.0" encoding="utf-8"?>
+<adaptive-icon xmlns:android="http://schemas.android.com/apk/res/android">
+    <background android:drawable="@drawable/ic_launcher_background" />
+    <foreground android:drawable="@drawable/ic_launcher_foreground" />
+</adaptive-icon>

autonfc/src/main/res/values/colors.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources>
+    <color name="colorPrimary">#009688</color>
+    <color name="colorPrimaryDark">#00796B</color>
+    <color name="colorAccent">#FF9800</color>
+</resources>

autonfc/src/main/res/values/strings.xml

@@ -0,0 +1,4 @@
+<resources>
+    <string name="app_name">AutoNFC</string>
+    
+</resources>

autonfc/src/main/res/values/styles.xml

@@ -0,0 +1,11 @@
+<resources>
+
+    <!-- Base application theme. -->
+    <style name="MyAppTheme" parent="Theme.AppCompat.Light.NoActionBar">
+        <!-- Customize your theme here. -->
+        <item name="colorPrimary">@color/colorPrimary</item>
+        <item name="colorPrimaryDark">@color/colorPrimaryDark</item>
+        <item name="colorAccent">@color/colorAccent</item>
+    </style>
+
+</resources>

autonfc/src/stage/AndroidManifest.xml

@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="utf-8"?>
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    xmlns:tools="http://schemas.android.com/tools" >
+
+    <application>
+
+        <!-- Put flavor specific code here -->
+
+    </application>
+
+</manifest>
+

autonfc/src/stage/res/values/strings.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources>
+
+    <!-- Put flavor specific strings here -->
+
+</resources>

contacts/README.md

@@ -0,0 +1,40 @@
+# Contacts
+源码参考自：
+https://github.com/aJIEw/PhoneCallApp.git
+
+#### 介绍
+这是可以根据正则表达式匹配拦截骚扰电话的手机拨号应用。
+
+#### 软件架构
+适配安卓应用 [AIDE Pro] 的 Gradle 编译结构。
+也适配安卓应用 [AndroidIDE] 的 Gradle 编译结构。
+
+
+#### Gradle 编译说明
+调试版编译命令 ：gradle assembleBetaDebug
+阶段版编译命令 ：gradle assembleStageRelease
+
+#### 使用说明
+
+在安卓系统中需要设置两个权限允许。
+1.自启动权限允许。
+2.省电策略-无限制权限允许。
+
+#### 参与贡献
+
+1.  Fork 本仓库
+2.  新建 Feat_xxx 分支
+3.  提交代码 : ZhanGSKen(ZhanGSKen<zhangsken@188.com>)
+4.  新建 Pull Request
+
+
+#### 特技
+
+1.  使用 Readme\_XXX.md 来支持不同的语言，例如 Readme\_en.md, Readme\_zh.md
+2.  Gitee 官方博客 [blog.gitee.com](https://blog.gitee.com)
+3.  你可以 [https://gitee.com/explore](https://gitee.com/explore) 这个地址来了解 Gitee 上的优秀开源项目
+4.  [GVP](https://gitee.com/gvp) 全称是 Gitee 最有价值开源项目，是综合评定出的优秀开源项目
+5.  Gitee 官方提供的使用手册 [https://gitee.com/help](https://gitee.com/help)
+6.  Gitee 封面人物是一档用来展示 Gitee 会员风采的栏目 [https://gitee.com/gitee-stars/](https://gitee.com/gitee-stars/)
+
+#### 参考文档

contacts/app_update_description.txt

@@ -0,0 +1 @@
+

contacts/build.gradle

@@ -0,0 +1,100 @@
+apply plugin: 'com.android.application'
+apply from: '../.winboll/winboll_app_build.gradle'
+apply from: '../.winboll/winboll_lint_build.gradle'
+
+def genVersionName(def versionName){
+    // 检查编译标志位配置
+    assert (winbollBuildProps['stageCount'] != null)
+    assert (winbollBuildProps['baseVersion'] != null)
+    // 保存基础版本号
+    winbollBuildProps.setProperty("baseVersion", "${versionName}");
+    //保存编译标志配置
+    FileOutputStream fos = new FileOutputStream(winbollBuildPropsFile)
+    winbollBuildProps.store(fos, "${winbollBuildPropsDesc}");
+    fos.close();
+    
+    // 返回编译版本号
+    return "${versionName}." + winbollBuildProps['stageCount']
+}
+
+android {
+ 	// 适配MIUI12
+	compileSdkVersion 30
+    buildToolsVersion "30.0.3"
+
+    defaultConfig {
+        applicationId "cc.winboll.studio.contacts"
+        minSdkVersion 23
+		// 适配MIUI12
+        targetSdkVersion 30
+        versionCode 2
+        // versionName 更新后需要手动设置 
+        // 项目模块目录的 build.gradle 文件的 stageCount=0
+        // Gradle编译环境下合起来的 versionName 就是 "${versionName}.0"
+        versionName "15.14" 
+        if(true) {
+            versionName = genVersionName("${versionName}")
+        }
+    }
+	
+	// 米盟 SDK
+    packagingOptions {
+         doNotStrip "*/*/libmimo_1011.so"
+    }
+}
+
+dependencies {
+	
+	// 米盟
+	api 'com.miui.zeus:mimo-ad-sdk:5.3.+'//请使用最新版sdk
+     //注意：以下5个库必须要引入
+    //api 'androidx.appcompat:appcompat:1.4.1'
+    api 'androidx.recyclerview:recyclerview:1.0.0'
+    api 'com.google.code.gson:gson:2.8.5'
+    api 'com.github.bumptech.glide:glide:4.9.0'
+    //annotationProcessor 'com.github.bumptech.glide:compiler:4.9.0'
+	
+    // 权限请求框架：https://github.com/getActivity/XXPermissions
+    //api 'com.github.getActivity:XXPermissions:18.63'
+    // 下拉控件
+    api 'com.baoyz.pullrefreshlayout:library:1.2.0'
+    // 拼音搜索
+    // https://mvnrepository.com/artifact/com.github.open-android/pinyin4j
+    api 'com.github.open-android:pinyin4j:2.5.0'
+    // SSH
+    api 'com.jcraft:jsch:0.1.55'
+    // Html 解析
+    api 'org.jsoup:jsoup:1.13.1'
+    // 二维码类库
+    api 'com.google.zxing:core:3.4.1'
+    api 'com.journeyapps:zxing-android-embedded:3.6.0'
+    // 应用介绍页类库
+    api 'io.github.medyo:android-about-page:2.0.0'
+    // 网络连接类库
+    api 'com.squareup.okhttp3:okhttp:4.4.1'
+    
+    // AndroidX 类库
+    /*implementation 'androidx.appcompat:appcompat:1.1.0'
+    implementation 'androidx.viewpager:viewpager:1.0.0'
+    implementation 'androidx.vectordrawable:vectordrawable:1.1.0'
+    implementation 'androidx.vectordrawable:vectordrawable-animated:1.1.0'
+    implementation 'androidx.fragment:fragment:1.1.0'
+    implementation 'com.google.android.material:material:1.4.0'
+    */
+    api 'androidx.appcompat:appcompat:1.1.0'
+    api 'com.google.android.material:material:1.4.0'
+    //api 'androidx.viewpager:viewpager:1.0.0'
+    //api 'androidx.vectordrawable:vectordrawable:1.1.0'
+    //api 'androidx.vectordrawable:vectordrawable-animated:1.1.0'
+    //api 'androidx.fragment:fragment:1.1.0'
+	
+	// WinBoLL库 nexus.winboll.cc 地址
+	api 'cc.winboll.studio:libaes:15.12.13'
+    api 'cc.winboll.studio:libappbase:15.14.2'
+	
+	// WinBoLL备用库 jitpack.io 地址
+	//api 'com.github.ZhanGSKen:AES:aes-v15.12.9'
+	//api 'com.github.ZhanGSKen:APPBase:appbase-v15.14.1'
+	
+	api fileTree(dir: 'libs', include: ['*.jar'])
+}

contacts/build.properties

@@ -0,0 +1,8 @@
+#Created by .winboll/winboll_app_build.gradle
+#Sat Apr 18 21:14:59 HKT 2026
+stageCount=13
+libraryProject=
+baseVersion=15.14
+publishVersion=15.14.12
+buildCount=0
+baseBetaVersion=15.14.13

contacts/proguard-rules.pro

@@ -0,0 +1,143 @@
+# Add project specific ProGuard rules here.
+# By default, the flags in this file are appended to flags specified
+# in C:\tools\adt-bundle-windows-x86_64-20131030\sdk/tools/proguard/proguard-android.txt
+# You can edit the include path and order by changing the proguardFiles
+# directive in build.gradle.
+#
+# For more details, see
+#   http://developer.android.com/guide/developing/tools/proguard.html
+
+# Add any project specific keep options here:
+
+# ============================== 基础通用规则 ==============================
+# 保留系统组件
+-keep public class * extends android.app.Activity
+-keep public class * extends android.app.Service
+-keep public class * extends android.content.BroadcastReceiver
+-keep public class * extends android.content.ContentProvider
+-keep public class * extends android.app.backup.BackupAgentHelper
+-keep public class * extends android.preference.Preference
+
+# 保留 WinBoLL 核心包及子类（合并简化规则）
+-keep class cc.winboll.studio.** { *; }
+-keepclassmembers class cc.winboll.studio.** { *; }
+
+# 保留所有类中的 public static final String TAG 字段（便于日志定位）
+-keepclassmembers class * {
+    public static final java.lang.String TAG;
+}
+
+# 保留序列化类（避免Parcelable/Gson解析异常）
+-keep class * implements android.os.Parcelable {
+    public static final android.os.Parcelable$Creator *;
+}
+-keepclassmembers class * implements java.io.Serializable {
+    static final long serialVersionUID;
+    private static final java.io.ObjectStreamField[] serialPersistentFields;
+    private void writeObject(java.io.ObjectOutputStream);
+    private void readObject(java.io.ObjectInputStream);
+    java.lang.Object writeReplace();
+    java.lang.Object readResolve();
+}
+
+# 保留 R 文件（避免资源ID混淆）
+-keepclassmembers class **.R$* {
+    public static <fields>;
+}
+
+# 保留 native 方法（避免JNI调用失败）
+-keepclasseswithmembernames class * {
+    native <methods>;
+}
+
+# 保留注解和泛型（避免反射/序列化异常）
+-keepattributes *Annotation*
+-keepattributes Signature
+
+# 屏蔽 Java 8+ 警告（适配 Java 7 语法）
+-dontwarn java.lang.invoke.*
+-dontwarn android.support.v8.renderscript.*
+-dontwarn java.util.function.**
+
+# ============================== 第三方框架专项规则 ==============================
+# OkHttp 4.4.1（米盟广告请求依赖，完善Lambda兼容）
+-keep class okhttp3.** { *; }
+-keep interface okhttp3.** { *; }
+-keep class okhttp3.internal.** { *; }
+-keep class okio.** { *; }
+-dontwarn okhttp3.internal.platform.**
+-dontwarn okio.**
+# ============================== 必要补充规则 ==============================
+# OkHttp 4.4.1 补充规则（Java 7 兼容）
+-keep class okhttp3.internal.concurrent.** { *; }
+-keep class okhttp3.internal.connection.** { *; }
+-dontwarn okhttp3.internal.concurrent.TaskRunner
+-dontwarn okhttp3.internal.connection.RealCall
+
+# Glide 4.9.0（米盟广告图片加载依赖）
+-keep public class * implements com.bumptech.glide.module.GlideModule
+-keep public class * extends com.bumptech.glide.module.AppGlideModule
+-keep public enum com.bumptech.glide.load.ImageHeaderParser$ImageType {
+    **[] $VALUES;
+    public *;
+}
+-keepclassmembers class * implements com.bumptech.glide.module.AppGlideModule {
+    <init>();
+}
+-dontwarn com.bumptech.glide.**
+
+# Gson 2.8.5（米盟广告数据序列化依赖）
+-keep class com.google.gson.** { *; }
+-keep interface com.google.gson.** { *; }
+-keepclassmembers class * {
+    @com.google.gson.annotations.SerializedName <fields>;
+}
+
+# 米盟 SDK（核心广告组件，完整保留避免加载失败）
+-keep class com.miui.zeus.** { *; }
+-keep interface com.miui.zeus.** { *; }
+# 保留米盟日志字段（便于广告加载失败排查）
+-keepclassmembers class com.miui.zeus.mimo.sdk.** {
+    public static final java.lang.String TAG;
+}
+
+# RecyclerView 1.0.0（米盟广告布局渲染依赖）
+-keep class androidx.recyclerview.** { *; }
+-keep interface androidx.recyclerview.** { *; }
+-keepclassmembers class androidx.recyclerview.widget.RecyclerView$Adapter {
+    public *;
+}
+
+# 其他第三方框架（按引入依赖保留，无则可删除）
+# XXPermissions 18.63
+-keep class com.hjq.permissions.** { *; }
+-keep interface com.hjq.permissions.** { *; }
+
+# ZXing 二维码（核心解析组件）
+-keep class com.google.zxing.** { *; }
+-keep class com.journeyapps.zxing.** { *; }
+
+# Jsoup HTML解析
+-keep class org.jsoup.** { *; }
+
+# Pinyin4j 拼音搜索
+-keep class net.sourceforge.pinyin4j.** { *; }
+
+# JSch SSH组件
+-keep class com.jcraft.jsch.** { *; }
+
+# AndroidX 基础组件
+-keep class androidx.appcompat.** { *; }
+-keep interface androidx.appcompat.** { *; }
+
+# ============================== 优化与调试配置 ==============================
+# 优化级别（平衡混淆效果与性能）
+-optimizationpasses 5
+-optimizations !code/simplification/arithmetic,!code/simplification/cast,!field/*,!class/merging/*
+
+# 调试辅助（保留行号便于崩溃定位）
+-verbose
+-dontpreverify
+-dontusemixedcaseclassnames
+-keepattributes SourceFile,LineNumberTable
+

contacts/src/beta/AndroidManifest.xml

@@ -0,0 +1,13 @@
+<?xml version="1.0" encoding="utf-8"?>
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    xmlns:tools="http://schemas.android.com/tools" >
+
+    <application
+        tools:replace="android:icon"
+        android:icon="@drawable/ic_winbollbeta">
+
+        <!-- Put flavor specific code here -->
+    </application>
+
+</manifest>
+

contacts/src/beta/res/values/strings.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources>
+
+    <string name="app_name">Contacts+</string>
+
+</resources>

contacts/src/main/AndroidManifest.xml

@@ -0,0 +1,258 @@
+<?xml version='1.0' encoding='utf-8'?>
+<manifest
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    package="cc.winboll.studio.contacts">
+
+    <!-- BIND_AUTOFILL_SERVICE -->
+    <uses-permission android:name="android.permission.BIND_AUTOFILL_SERVICE"/>
+
+    <!-- 拨打电话 -->
+    <uses-permission android:name="android.permission.CALL_PHONE"/>
+
+    <!-- 读取手机状态和身份 -->
+    <uses-permission android:name="android.permission.READ_PHONE_STATE"/>
+
+    <!-- 读取电话号码 -->
+    <uses-permission android:name="android.permission.READ_PHONE_NUMBERS"/>
+
+    <!-- 修改系统设置 -->
+    <uses-permission android:name="android.permission.WRITE_SETTINGS"/>
+
+    <!-- 读取联系人 -->
+    <uses-permission android:name="android.permission.READ_CONTACTS"/>
+
+    <!-- 修改您的通讯录 -->
+    <uses-permission android:name="android.permission.WRITE_CONTACTS"/>
+
+    <!-- GET_CONTACTS -->
+    <uses-permission android:name="android.permission.GET_CONTACTS"/>
+
+    <!-- 此应用可显示在其他应用上方 -->
+    <uses-permission android:name="android.permission.SYSTEM_ALERT_WINDOW"/>
+
+    <!-- 更改您的音频设置 -->
+    <uses-permission android:name="android.permission.MODIFY_AUDIO_SETTINGS"/>
+
+    <!-- 读取通话记录 -->
+    <uses-permission android:name="android.permission.READ_CALL_LOG"/>
+
+    <!-- 新建/修改/删除通话记录 -->
+    <uses-permission android:name="android.permission.WRITE_CALL_LOG"/>
+
+    <!-- GET_CALL_LOG -->
+    <uses-permission android:name="android.permission.GET_CALL_LOG"/>
+
+    <!-- 录音 -->
+    <uses-permission android:name="android.permission.RECORD_AUDIO"/>
+
+    <!-- 运行前台服务 -->
+    <uses-permission android:name="android.permission.FOREGROUND_SERVICE"/>
+
+    <!-- 运行“dataSync”类型的前台服务 -->
+    <uses-permission android:name="android.permission.FOREGROUND_SERVICE_DATA_SYNC"/>
+
+    <!-- 运行“phoneCall”类型的前台服务 -->
+    <uses-permission android:name="android.permission.FOREGROUND_SERVICE_PHONE_CALL"/>
+
+    <!-- 运行“microphone”类型的前台服务 -->
+    <uses-permission android:name="android.permission.FOREGROUND_SERVICE_MICROPHONE"/>
+
+    <!-- BIND_CALL_SCREENING_SERVICE -->
+    <uses-permission android:name="android.permission.BIND_CALL_SCREENING_SERVICE"/>
+
+    <!-- 读取您共享存储空间中的内容 -->
+    <uses-permission android:name="android.permission.READ_EXTERNAL_STORAGE"/>
+
+    <!-- 修改或删除您共享存储空间中的内容 -->
+    <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"/>
+
+    <!-- MANAGE_EXTERNAL_STORAGE -->
+    <uses-permission android:name="android.permission.MANAGE_EXTERNAL_STORAGE"/>
+
+    <application
+        android:name=".App"
+        android:allowBackup="true"
+        android:icon="@drawable/ic_winboll"
+        android:label="@string/app_name"
+        android:theme="@style/MyAppTheme"
+        android:requestLegacyExternalStorage="true"
+        android:supportsRtl="true"
+        android:networkSecurityConfig="@xml/network_security_config">
+
+        <activity
+            android:name=".MainActivity"
+            android:label="@string/app_name"
+            android:exported="true">
+
+            <intent-filter>
+
+                <action android:name="android.intent.action.MAIN"/>
+
+                <category android:name="android.intent.category.LAUNCHER"/>
+
+            </intent-filter>
+
+        </activity>
+
+        <activity
+            android:name=".activities.CallActivity"
+            android:label="CallActivity"
+            android:launchMode="singleTask"
+            android:exported="true">
+
+        </activity>
+
+        <activity
+            android:name=".phonecallui.PhoneCallActivity"
+            android:launchMode="singleTask"
+            android:exported="true">
+
+            <intent-filter>
+
+                <action android:name="android.intent.action.DIAL"/>
+
+                <action android:name="android.intent.action.VIEW"/>
+
+                <category android:name="android.intent.category.DEFAULT"/>
+
+                <category android:name="android.intent.category.BROWSABLE"/>
+
+                <data android:scheme="tel"/>
+
+            </intent-filter>
+
+            <intent-filter>
+
+                <action android:name="android.intent.action.DIAL"/>
+
+                <category android:name="android.intent.category.DEFAULT"/>
+
+            </intent-filter>
+
+        </activity>
+
+        <activity android:name="cc.winboll.studio.contacts.activities.SettingsActivity"/>
+
+        <service
+            android:name=".services.MainService"
+            android:foregroundServiceType="dataSync"
+            android:exported="false"
+            android:stopWithTask="false"/>
+
+        <service
+            android:name=".services.AssistantService"
+            android:exported="false"
+            android:stopWithTask="false"/>
+
+        <service
+            android:name=".phonecallui.PhoneCallService"
+            android:permission="android.permission.BIND_INCALL_SERVICE"
+            android:exported="false"
+            android:stopWithTask="false">
+
+            <meta-data
+                android:name="android.telecom.IN_CALL_SERVICE_UI"
+                android:value="true"/>
+
+            <intent-filter>
+
+                <action android:name="android.telecom.InCallService"/>
+
+            </intent-filter>
+
+        </service>
+
+        <service
+            android:name=".listenphonecall.CallListenerService"
+            android:enabled="true"
+            android:exported="false"
+            android:stopWithTask="false">
+
+            <intent-filter android:priority="1000">
+
+                <action android:name=".service.CallShowService"/>
+
+            </intent-filter>
+
+        </service>
+
+        <service
+            android:name=".services.MyCallScreeningService"
+            android:permission="android.permission.BIND_CALL_SCREENING_SERVICE"
+            android:exported="true"
+            android:stopWithTask="false">
+
+            <intent-filter>
+
+                <action android:name="android.telecom.CallScreeningService"/>
+
+            </intent-filter>
+
+        </service>
+
+        <receiver
+            android:name=".receivers.MainReceiver"
+            android:stopWithTask="false">
+
+            <intent-filter>
+
+                <action android:name="cc.winboll.studio.contacts.receivers.MainReceiver"/>
+
+            </intent-filter>
+
+        </receiver>
+
+        <receiver
+            android:name=".widgets.APPStatusWidget"
+            android:exported="true"
+            android:stopWithTask="false">
+
+            <intent-filter>
+
+                <action android:name="android.appwidget.action.APPWIDGET_UPDATE"/>
+
+                <action android:name="cc.winboll.studio.contacts.widgets.APPStatusWidget.ACTION_STATUS_ACTIVE"/>
+
+                <action android:name="cc.winboll.studio.contacts.widgets.APPStatusWidget.ACTION_STATUS_NOACTIVE"/>
+
+            </intent-filter>
+
+            <meta-data
+                android:name="android.appwidget.provider"
+                android:resource="@xml/appwidget_provider_info"/>
+
+        </receiver>
+
+        <receiver
+            android:name=".widgets.APPStatusWidgetClickListener"
+            android:stopWithTask="false">
+
+            <intent-filter>
+
+                <action android:name="cc.winboll.studio.contacts.widgets.APPStatusWidgetClickListener.ACTION_APPICON_CLICK"/>
+
+            </intent-filter>
+
+        </receiver>
+
+        <provider
+            android:name="androidx.core.content.FileProvider"
+            android:authorities="${applicationId}.fileprovider"
+            android:exported="false"
+            android:grantUriPermissions="true">
+
+            <meta-data
+                android:name="android.support.FILE_PROVIDER_PATHS"
+                android:resource="@xml/file_provider"/>
+
+        </provider>
+
+        <activity android:name="cc.winboll.studio.contacts.activities.UnitTestActivity"/>
+
+        <activity android:name="cc.winboll.studio.contacts.activities.AboutActivity"/>
+
+        <service android:name="cc.winboll.studio.contacts.services.LimitedTimeSpecialChannelService"/>
+
+    </application>
+
+</manifest>

contacts/src/main/java/cc/winboll/studio/contacts/ActivityStack.java

@@ -0,0 +1,313 @@
+package cc.winboll.studio.contacts;
+
+import android.app.Activity;
+import android.os.Handler;
+import android.os.Looper;
+import cc.winboll.studio.libappbase.LogUtils;
+import java.util.ArrayList;
+import java.util.List;
+
+/**
+ * @Author ZhanGSKen&豆包大模型<zhangsken@qq.com>
+ * @Date 2025/02/13 06:58:04
+ * @Describe Activity 栈管理工具，统一管理应用内 Activity 生命周期
+ * 适配：Java7 + Android API29-30 + 小米机型，优化并发安全与通话场景稳定性
+ */
+public class ActivityStack {
+    // 常量定义（核心标识+版本兼容常量）
+    public static final String TAG = "ActivityStack";
+    private static final int API_VERSION_O = 26; // Android 8.0 API26（isDestroyed适配用）
+
+    // 单例与核心成员变量（按优先级排序）
+    private static final ActivityStack INSTANCE = new ActivityStack();
+    // 替换为ArrayList+同步锁：解决CopyOnWriteArrayList迭代器不能删除的崩溃，兼顾并发安全
+    private final List<Activity> mActivityList = new ArrayList<Activity>();
+    private final Handler mMainHandler = new Handler(Looper.getMainLooper()); // 复用主线程Handler，避免内存泄漏
+
+    // 单例对外暴露方法
+    public static ActivityStack getInstance() {
+        return INSTANCE;
+    }
+
+    // 私有构造，禁止外部实例化
+    private ActivityStack() {
+        LogUtils.d(TAG, "ActivityStack 初始化完成");
+    }
+
+    // ====================== 栈基础操作（添加/移除） ======================
+    /**
+     * 添加Activity到栈中，避免重复入栈
+     * @param activity 待添加的Activity
+     */
+    public void addActivity(Activity activity) {
+        if (activity == null) {
+            LogUtils.w(TAG, "addActivity: activity is null, skip");
+            return;
+        }
+        // 同步锁：解决多线程并发添加冲突（小米机型多线程场景适配）
+        synchronized (mActivityList) {
+            if (!mActivityList.contains(activity)) {
+                mActivityList.add(activity);
+                LogUtils.d(TAG, "addActivity: " + activity.getClass().getSimpleName() + ", stack size: " + mActivityList.size());
+            }
+        }
+    }
+
+    /**
+     * 移除Activity（不销毁，用于正常退出场景）
+     * @param activity 待移除的Activity
+     */
+    public void removeActivity(Activity activity) {
+        if (activity == null) {
+            LogUtils.w(TAG, "removeActivity: activity is null, skip");
+            return;
+        }
+        synchronized (mActivityList) {
+            if (mActivityList.remove(activity)) {
+                LogUtils.d(TAG, "removeActivity: " + activity.getClass().getSimpleName() + ", stack size: " + mActivityList.size());
+            }
+        }
+    }
+
+    // ====================== Activity状态查询（获取/判断存活） ======================
+    /**
+     * 获取栈顶有效Activity（迭代遍历替代递归，避免栈溢出，适配小米多页面场景）
+     * @return 栈顶有效Activity，无则返回null
+     */
+    public Activity getTopActivity() {
+        synchronized (mActivityList) {
+            if (mActivityList.isEmpty()) {
+                LogUtils.w(TAG, "getTopActivity: stack is empty, return null");
+                return null;
+            }
+
+            Activity validTopActivity = null;
+            // 倒序遍历，优先取最顶层有效Activity，同时清理无效残留
+            for (int i = mActivityList.size() - 1; i >= 0; i--) {
+                Activity activity = mActivityList.get(i);
+                // 版本兼容校验：API26+才支持isDestroyed
+                if (activity != null && !activity.isFinishing() && (getSdkVersion() < API_VERSION_O || !activity.isDestroyed())) {
+                    validTopActivity = activity;
+                    break;
+                } else {
+                    mActivityList.remove(i);
+                    String className = (activity != null) ? activity.getClass().getSimpleName() : "null";
+                    LogUtils.w(TAG, "getTopActivity: remove invalid activity: " + className);
+                }
+            }
+
+            if (validTopActivity != null) {
+                LogUtils.d(TAG, "getTopActivity: top activity: " + validTopActivity.getClass().getSimpleName());
+            }
+            return validTopActivity;
+        }
+    }
+
+    /**
+     * 获取指定类的有效Activity实例（通话场景核心方法，判断页面是否存活）
+     * @param activityClass 目标Activity类
+     * @return 有效实例，无则返回null
+     */
+    public Activity getActivity(Class<?> activityClass) {
+        if (activityClass == null) {
+            LogUtils.w(TAG, "getActivity: activityClass is null, return null");
+            return null;
+        }
+        synchronized (mActivityList) {
+            if (mActivityList.isEmpty()) {
+                LogUtils.w(TAG, "getActivity: stack empty, return null");
+                return null;
+            }
+
+            for (Activity activity : mActivityList) {
+                if (activity != null && activity.getClass().equals(activityClass) && !activity.isFinishing() && (getSdkVersion() < API_VERSION_O || !activity.isDestroyed())) {
+                    LogUtils.d(TAG, "getActivity: find valid activity: " + activityClass.getSimpleName());
+                    return activity;
+                }
+            }
+            LogUtils.w(TAG, "getActivity: no valid activity: " + activityClass.getSimpleName());
+            return null;
+        }
+    }
+
+    /**
+     * 判断指定Activity是否存活（简化通话场景调用，避免重复判空）
+     * @param activityClass 目标Activity类
+     * @return true：存活，false：未存活
+     */
+    public boolean isActivityAlive(Class<?> activityClass) {
+        boolean isAlive = getActivity(activityClass) != null;
+        LogUtils.d(TAG, "isActivityAlive: " + activityClass.getSimpleName() + ", result: " + isAlive);
+        return isAlive;
+    }
+
+    // ====================== Activity销毁操作（单/批量/全部） ======================
+    /**
+     * 销毁栈顶Activity（主线程执行，适配小米机型线程限制）
+     */
+    public void finishTopActivity() {
+        runOnMainThread(new Runnable() {
+				@Override
+				public void run() {
+					synchronized (mActivityList) {
+						if (mActivityList.isEmpty()) {
+							LogUtils.w(TAG, "finishTopActivity: stack is empty, skip");
+							return;
+						}
+
+						// 先移除再校验，避免并发冲突（小米多线程场景适配）
+						Activity topActivity = mActivityList.remove(mActivityList.size() - 1);
+						if (topActivity == null) {
+							LogUtils.w(TAG, "finishTopActivity: top activity is null, skip");
+							return;
+						}
+
+						if (!topActivity.isFinishing() && (getSdkVersion() < API_VERSION_O || !topActivity.isDestroyed())) {
+							topActivity.finish();
+							LogUtils.d(TAG, "finishTopActivity: destroy top activity: " + topActivity.getClass().getSimpleName() + ", stack size: " + mActivityList.size());
+						}
+					}
+				}
+			});
+    }
+
+    /**
+     * 销毁指定Activity（主线程执行，避免跨线程异常）
+     * @param activity 待销毁的Activity
+     */
+    public void finishActivity(final Activity activity) {
+        runOnMainThread(new Runnable() {
+				@Override
+				public void run() {
+					if (activity == null) {
+						LogUtils.w(TAG, "finishActivity: activity is null, skip");
+						return;
+					}
+					synchronized (mActivityList) {
+						if (mActivityList.contains(activity) && !activity.isFinishing() && (getSdkVersion() < API_VERSION_O || !activity.isDestroyed())) {
+							mActivityList.remove(activity);
+							activity.finish();
+							LogUtils.d(TAG, "finishActivity: destroy activity: " + activity.getClass().getSimpleName() + ", stack size: " + mActivityList.size());
+						}
+					}
+				}
+			});
+    }
+
+    /**
+     * 销毁指定类的所有Activity（核心修复：迭代器删除崩溃，通话场景核心）
+     * @param activityClass 目标Activity类
+     */
+    public void finishActivity(final Class<?> activityClass) {
+        runOnMainThread(new Runnable() {
+				@Override
+				public void run() {
+					if (activityClass == null) {
+						LogUtils.w(TAG, "finishActivity: activityClass is null, skip");
+						return;
+					}
+					synchronized (mActivityList) {
+						if (mActivityList.isEmpty()) {
+							LogUtils.w(TAG, "finishActivity: stack empty, skip");
+							return;
+						}
+
+						// 核心修复：用索引遍历+倒序删除，替代迭代器删除（避免UnsupportedOperationException）
+						for (int i = mActivityList.size() - 1; i >= 0; i--) {
+							Activity activity = mActivityList.get(i);
+							if (activity != null && activity.getClass().equals(activityClass)) {
+								if (!activity.isFinishing() && (getSdkVersion() < API_VERSION_O || !activity.isDestroyed())) {
+									mActivityList.remove(i); // 索引删除，支持ArrayList
+									activity.finish();
+									LogUtils.d(TAG, "finishActivity: destroy class activity: " + activityClass.getSimpleName() + ", stack size: " + mActivityList.size());
+								} else {
+									mActivityList.remove(i); // 清理无效残留
+								}
+							}
+						}
+					}
+				}
+			});
+    }
+
+    /**
+     * 销毁栈中所有Activity（退出应用/清空栈场景用）
+     */
+    public void finishAllActivity() {
+        runOnMainThread(new Runnable() {
+				@Override
+				public void run() {
+					synchronized (mActivityList) {
+						if (mActivityList.isEmpty()) {
+							LogUtils.w(TAG, "finishAllActivity: stack is empty, skip");
+							return;
+						}
+
+						// 遍历销毁所有有效Activity，逐个状态校验（小米机型稳定性适配）
+						for (Activity activity : mActivityList) {
+							if (activity != null && !activity.isFinishing() && (getSdkVersion() < API_VERSION_O || !activity.isDestroyed())) {
+								activity.finish();
+								LogUtils.d(TAG, "finishAllActivity: destroy activity: " + activity.getClass().getSimpleName());
+							}
+						}
+						mActivityList.clear();
+						LogUtils.d(TAG, "finishAllActivity: all activity destroyed, stack cleared");
+					}
+				}
+			});
+    }
+
+    // ====================== 栈优化与工具方法 ======================
+    /**
+     * 清理栈中所有无效Activity（null/已销毁/已结束），优化小米机型内存占用
+     */
+    public void clearInvalidActivities() {
+        runOnMainThread(new Runnable() {
+				@Override
+				public void run() {
+					synchronized (mActivityList) {
+						if (mActivityList.isEmpty()) {
+							return;
+						}
+
+						// 倒序索引删除，避免遍历过程中索引错乱
+						for (int i = mActivityList.size() - 1; i >= 0; i--) {
+							Activity activity = mActivityList.get(i);
+							if (activity == null || activity.isFinishing() || (getSdkVersion() >= API_VERSION_O && activity.isDestroyed())) {
+								mActivityList.remove(i);
+								String className = (activity != null) ? activity.getClass().getSimpleName() : "null";
+								LogUtils.d(TAG, "clearInvalidActivities: remove invalid activity: " + className);
+							}
+						}
+						LogUtils.d(TAG, "clearInvalidActivities: done, stack size: " + mActivityList.size());
+					}
+				}
+			});
+    }
+
+    /**
+     * 确保任务在主线程执行（Activity操作必须主线程，小米机型严格限制）
+     * @param runnable 待执行任务
+     */
+    private void runOnMainThread(Runnable runnable) {
+        if (runnable == null) {
+            return;
+        }
+        // 避免不必要的线程切换，优化性能（小米机型流畅度适配）
+        if (Looper.getMainLooper() == Looper.myLooper()) {
+            runnable.run();
+        } else {
+            mMainHandler.post(runnable);
+            LogUtils.d(TAG, "runOnMainThread: post task to main thread");
+        }
+    }
+
+    /**
+     * 辅助方法：获取当前系统SDK版本（简化版本判断逻辑，统一调用）
+     * @return SDK版本号
+     */
+    private int getSdkVersion() {
+        return android.os.Build.VERSION.SDK_INT;
+    }
+}
+

contacts/src/main/java/cc/winboll/studio/contacts/App.java

@@ -0,0 +1,33 @@
+package cc.winboll.studio.contacts;
+
+/**
+ * @Author ZhanGSKen<zhangsken@qq.com>
+ * @Date 2024/12/08 15:10:51
+ * @Describe 全局应用类
+ */
+import cc.winboll.studio.libaes.utils.WinBoLLActivityManager;
+import cc.winboll.studio.libappbase.GlobalApplication;
+import cc.winboll.studio.libappbase.ToastUtils;
+
+public class App extends GlobalApplication {
+
+    public static final String TAG = "App";
+
+    @Override
+    public void onCreate() {
+        super.onCreate();
+		// 设置应用调试标志
+        setIsDebugging(BuildConfig.DEBUG);
+
+		// 初始化窗口管理类
+		WinBoLLActivityManager.init(this);
+        // 初始化 Toast 框架
+        ToastUtils.init(this);
+    }
+
+	@Override
+	public void onTerminate() {
+		super.onTerminate();
+		ToastUtils.release();
+	}
+}

contacts/src/main/java/cc/winboll/studio/contacts/MainActivity.java

@@ -0,0 +1,529 @@
+package cc.winboll.studio.contacts;
+
+import android.Manifest;
+import android.app.Activity;
+import android.app.ActivityManager;
+import android.app.AlertDialog;
+import android.content.Context;
+import android.content.DialogInterface;
+import android.content.Intent;
+import android.graphics.Color;
+import android.net.Uri;
+import android.os.Build;
+import android.os.Bundle;
+import android.os.Handler;
+import android.os.Looper;
+import android.telecom.TelecomManager;
+import android.view.Menu;
+import android.view.MenuItem;
+import android.view.View;
+import android.widget.CheckBox;
+import android.widget.ImageView;
+import android.widget.LinearLayout;
+import android.widget.Toast;
+import androidx.appcompat.widget.Toolbar;
+import androidx.fragment.app.Fragment;
+import androidx.fragment.app.FragmentManager;
+import androidx.fragment.app.FragmentPagerAdapter;
+import androidx.viewpager.widget.ViewPager;
+import cc.winboll.studio.contacts.activities.SettingsActivity;
+import cc.winboll.studio.contacts.activities.WinBollActivity;
+import cc.winboll.studio.contacts.dun.Rules;
+import cc.winboll.studio.contacts.fragments.CallLogFragment;
+import cc.winboll.studio.contacts.fragments.ContactsFragment;
+import cc.winboll.studio.contacts.fragments.LogFragment;
+import cc.winboll.studio.contacts.model.MainServiceBean;
+import cc.winboll.studio.contacts.services.MainService;
+import cc.winboll.studio.contacts.utils.PermissionUtils;
+import cc.winboll.studio.contacts.views.DunTemperatureView;
+import cc.winboll.studio.libaes.interfaces.IWinBoLLActivity;
+import cc.winboll.studio.libaes.views.ADsBannerView;
+import cc.winboll.studio.libappbase.LogUtils;
+import cc.winboll.studio.libappbase.LogView;
+import com.google.android.material.tabs.TabLayout;
+import java.util.ArrayList;
+import java.util.List;
+
+/**
+ * @Author ZhanGSKen&豆包大模型<zhangsken@qq.com>
+ * @Date 2025/08/30 14:32
+ * @Describe Contacts 主窗口（完全适配 API 30 + Java 7 语法）
+ * 核心优化：1. 移除电话状态监听 2. 移除通话筛选服务 3. 移除 MainService 所有相关逻辑 4. ViewPager 实现 Fragment 懒加载（仅首屏初始化）
+ * 问题修复：解决首屏 Fragment 空白问题（删除 setPrimaryItem 冲突逻辑+延迟首屏初始化）
+ */
+public final class MainActivity extends WinBollActivity implements IWinBoLLActivity, ViewPager.OnPageChangeListener, View.OnClickListener {
+
+    // ====================== 1. 常量定义区（硬编码API版本，避免高版本依赖） ======================
+    public static final String TAG = "MainActivity";
+    public static final int REQUEST_HOME_ACTIVITY = 0;
+    public static final int REQUEST_ABOUT_ACTIVITY = 1;
+    public static final int REQUEST_APP_SETTINGS = 2;
+    public static final String ACTION_SOS = "cc.winboll.studio.libappbase.WinBoLL.ACTION_SOS";
+    private static final int DIALER_REQUEST_CODE = 1;
+    private static final int REQUEST_REQUIRED_PERMISSIONS = 1002;
+    private static final int REQUEST_OVERLAY_PERMISSION = 1003;
+
+    // API版本硬编码常量（Java 7兼容，杜绝Build.VERSION_CODES高版本引用）
+    private static final int ANDROID_6_API = 23;
+    private static final int ANDROID_8_API = 26;
+    private static final int ANDROID_10_API = 29;
+    private static final int ANDROID_14_API = 34;
+
+    // ====================== 2. 静态成员区 ======================
+    static MainActivity _MainActivity;
+
+    // ====================== 3. 权限常量区 ======================
+    private final String[] REQUIRED_PERMISSIONS = PermissionUtils.BASE_PERMISSIONS;
+
+    // ====================== 4. UI控件成员区 ======================
+    private ADsBannerView mADsBannerView;
+    private LogView mLogView;
+    private Toolbar mToolbar;
+    private CheckBox cbMainService;
+    private TabLayout tabLayout;
+    private ViewPager viewPager;
+    private List<View> views;
+    private ImageView[] imageViews;
+    private LinearLayout linearLayout;
+
+    // ====================== 5. 业务逻辑成员区 ======================
+    private int currentPoint = 0;
+    private List<Fragment> fragmentList;
+    private List<String> tabTitleList;
+    // 记录已初始化的Fragment位置（避免重复初始化）
+    private boolean[] isFragmentInit;
+
+    // ====================== 6. 接口实现区 ======================
+    @Override
+    public Activity getActivity() {
+        return this;
+    }
+
+    @Override
+    public String getTag() {
+        return TAG;
+    }
+
+    // ====================== 7. 生命周期函数区 ======================
+    @Override
+    protected void onCreate(Bundle savedInstanceState) {
+        super.onCreate(savedInstanceState);
+        LogUtils.d(TAG, "===== onCreate: 主Activity开始创建 =====");
+        _MainActivity = this;
+
+        // 直接初始化UI（原权限检查逻辑注释保留，按需启用）
+        initUIAndLogic(savedInstanceState);
+
+		MainServiceBean mainServiceBean = MainServiceBean.loadBean(this, MainServiceBean.class);
+		if (mainServiceBean != null && mainServiceBean.isEnable()) {
+			Intent intent = new Intent(this, MainService.class);
+			// 根据应用前后台状态选择启动方式（Android 12+ 后台用 startForegroundService）
+			if (Build.VERSION.SDK_INT >= 31) {
+				startForegroundService(intent);
+			} else {
+				startService(intent);
+			}
+		}
+        LogUtils.d(TAG, "===== onCreate: 主Activity创建流程结束 =====");
+    }
+
+    @Override
+    protected void onPostCreate(Bundle savedInstanceState) {
+        super.onPostCreate(savedInstanceState);
+        LogUtils.d(TAG, "onPostCreate: 主Activity创建完成");
+    }
+
+    @Override
+    protected void onResume() {
+        super.onResume();
+        if (mADsBannerView != null) {
+            mADsBannerView.resumeADs(MainActivity.this);
+            LogUtils.d(TAG, "onResume: 广告栏资源已恢复");
+        }
+    }
+
+    @Override
+    protected void onPause() {
+        super.onPause();
+    }
+
+    @Override
+    protected void onDestroy() {
+        super.onDestroy();
+        LogUtils.d(TAG, "===== onDestroy: 主Activity开始销毁 =====");
+        // 释放广告资源
+        if (mADsBannerView != null) {
+            mADsBannerView.releaseAdResources();
+            LogUtils.d(TAG, "onDestroy: 广告栏资源已释放");
+        }
+        // 清空Fragment相关引用，避免内存泄漏
+        if (fragmentList != null) {
+            fragmentList.clear();
+            fragmentList = null;
+        }
+        if (tabTitleList != null) {
+            tabTitleList.clear();
+            tabTitleList = null;
+        }
+        isFragmentInit = null;
+        LogUtils.d(TAG, "===== onDestroy: 主Activity销毁完成 =====");
+    }
+
+    // ====================== 8. 权限相关回调函数区 ======================
+    @Override
+    public void onRequestPermissionsResult(int requestCode, String[] permissions, int[] grantResults) {
+        super.onRequestPermissionsResult(requestCode, permissions, grantResults);
+        LogUtils.d(TAG, "onRequestPermissionsResult: 权限请求回调，requestCode=" + requestCode);
+
+        if (requestCode == REQUEST_REQUIRED_PERMISSIONS) {
+            String deniedPerms = PermissionUtils.getDeniedPermissions(this, permissions);
+            if (deniedPerms.length() == 0) {
+                LogUtils.d(TAG, "onRequestPermissionsResult: 所有危险权限授予成功");
+                checkAndRequestRemainingPermissions();
+            } else {
+                LogUtils.e(TAG, "onRequestPermissionsResult: 被拒权限：" + deniedPerms);
+                showPermissionDeniedDialogAndExit("应用需要「" + deniedPerms + "」权限才能正常运行，请授予权限后重新打开应用。");
+            }
+        }
+    }
+
+    @Override
+    protected void onActivityResult(int requestCode, int resultCode, Intent data) {
+        super.onActivityResult(requestCode, resultCode, data);
+        LogUtils.d(TAG, "onActivityResult: 页面回调触发，requestCode=" + requestCode + "，resultCode=" + resultCode);
+
+        switch (requestCode) {
+            case DIALER_REQUEST_CODE:
+                if (resultCode == Activity.RESULT_OK) {
+                    LogUtils.d(TAG, "onActivityResult: 设为默认拨号应用成功");
+                    Toast.makeText(MainActivity.this, getString(R.string.app_name) + " 已成为默认电话应用", Toast.LENGTH_SHORT).show();
+                }
+                break;
+            case REQUEST_APP_SETTINGS:
+                LogUtils.d(TAG, "onActivityResult: 从设置页返回，重建Activity");
+                recreate();
+                break;
+            case REQUEST_OVERLAY_PERMISSION:
+                handleOverlayPermissionResult();
+                break;
+            default:
+                LogUtils.w(TAG, "onActivityResult: 未知requestCode=" + requestCode);
+                break;
+        }
+    }
+
+    /**
+     * 处理悬浮窗权限申请结果
+     */
+    private void handleOverlayPermissionResult() {
+        if (PermissionUtils.isOverlayPermissionGranted(this)) {
+            LogUtils.d(TAG, "handleOverlayPermissionResult: 悬浮窗权限申请成功");
+            LogUtils.d(TAG, "handleOverlayPermissionResult: 所有权限已授予");
+            initUIAndLogic(null);
+        } else {
+            LogUtils.e(TAG, "handleOverlayPermissionResult: 悬浮窗权限申请失败");
+            showPermissionDeniedDialogAndExit("应用需要悬浮窗权限才能展示来电弹窗，请授予后重新打开应用。");
+        }
+    }
+
+    /**
+     * 检查并申请剩余权限（仅保留悬浮窗）
+     */
+    private void checkAndRequestRemainingPermissions() {
+        if (!PermissionUtils.isOverlayPermissionGranted(this)) {
+            LogUtils.d(TAG, "checkAndRequestRemainingPermissions: 悬浮窗权限未授予，跳转设置页");
+            PermissionUtils.requestOverlayPermission(this, REQUEST_OVERLAY_PERMISSION);
+        } else {
+            LogUtils.d(TAG, "checkAndRequestRemainingPermissions: 所有权限已授予");
+            initUIAndLogic(null);
+        }
+    }
+
+    /**
+     * 权限拒绝提示对话框（Java 7 匿名内部类实现，禁止Lambda）
+     */
+    private void showPermissionDeniedDialogAndExit(String tip) {
+        LogUtils.d(TAG, "showPermissionDeniedDialogAndExit: 弹出权限不足提示框");
+        AlertDialog.Builder builder = new AlertDialog.Builder(this);
+        builder.setTitle("权限不足，无法使用");
+        builder.setMessage(tip);
+        builder.setCancelable(false);
+
+        builder.setNegativeButton("去设置", new DialogInterface.OnClickListener() {
+				@Override
+				public void onClick(DialogInterface dialog, int which) {
+					dialog.dismiss();
+					LogUtils.d(TAG, "showPermissionDeniedDialogAndExit: 用户选择去设置权限");
+					PermissionUtils.goAppDetailsSettings(MainActivity.this);
+				}
+			});
+
+        builder.setPositiveButton("确定退出", new DialogInterface.OnClickListener() {
+				@Override
+				public void onClick(DialogInterface dialog, int which) {
+					dialog.dismiss();
+					LogUtils.d(TAG, "showPermissionDeniedDialogAndExit: 用户选择退出应用");
+					finishAndRemoveTask();
+				}
+			});
+
+        builder.show();
+    }
+
+    // ====================== 9. UI与业务逻辑初始化区 ======================
+    private void initUIAndLogic(Bundle savedInstanceState) {
+        if (mToolbar != null) {
+            LogUtils.d(TAG, "initUIAndLogic: UI已初始化，无需重复执行");
+            return;
+        }
+
+        LogUtils.d(TAG, "===== initUIAndLogic: 开始初始化UI与业务逻辑 =====");
+        setContentView(R.layout.activity_main);
+
+        // 1. 工具栏初始化
+        mToolbar = (Toolbar) findViewById(R.id.activitymainToolbar1);
+        setSupportActionBar(mToolbar);
+        getSupportActionBar().setSubtitle(TAG);
+        LogUtils.d(TAG, "initUIAndLogic: 工具栏初始化完成");
+
+        // 2. TabLayout与ViewPager初始化
+        tabLayout = (TabLayout) findViewById(R.id.tabLayout);
+        viewPager = (ViewPager) findViewById(R.id.viewPager);
+        initViewPagerAndTabs();
+        tabLayout.setupWithViewPager(viewPager);
+        LogUtils.d(TAG, "initUIAndLogic: ViewPager与TabLayout初始化完成");
+
+        // 3. 广告栏初始化
+        mADsBannerView = (ADsBannerView) findViewById(R.id.adsbanner);
+        LogUtils.d(TAG, "initUIAndLogic: 广告栏控件初始化完成");
+
+        // 左边盾值视图初始化（Java7分步写法，禁止链式调用）
+        DunTemperatureView tempViewLeft = (DunTemperatureView) findViewById(R.id.dun_temp_view_left);
+        tempViewLeft.setMaxValue(Rules.getInstance(this).getSettingsModel().getDunTotalCount());
+        tempViewLeft.setCurrentValue(Rules.getInstance(this).getSettingsModel().getDunCurrentCount());
+
+        int[] customColors = new int[2];
+        customColors[0] = Color.parseColor("#FF3366FF");
+        customColors[1] = Color.parseColor("#FF9900CC");
+        float[] positions = new float[2];
+        positions[0] = 0.0f;
+        positions[1] = 1.0f;
+        tempViewLeft.setGradientColors(customColors, positions);
+        // 文本放在温度条右侧（默认，可省略）
+        tempViewLeft.setTextPosition(true);
+        // 右边盾值视图初始化（Java7分步写法，禁止链式调用）
+        DunTemperatureView tempViewRight = (DunTemperatureView) findViewById(R.id.dun_temp_view_right);
+        tempViewRight.setMaxValue(Rules.getInstance(this).getSettingsModel().getDunTotalCount());
+        tempViewRight.setCurrentValue(Rules.getInstance(this).getSettingsModel().getDunCurrentCount());
+
+        tempViewRight.setGradientColors(customColors, positions);
+        // 文本放在温度条左侧
+        tempViewRight.setTextPosition(false);
+        LogUtils.d(TAG, "initUIAndLogic: 盾值视图初始化完成");
+        LogUtils.d(TAG, "===== initUIAndLogic: 初始化流程全部结束 =====");
+    }
+
+    /**
+     * 初始化ViewPager与Tab数据（Java7规范，泛型完整声明），添加懒加载标记
+     * 关键修改：延迟50ms初始化首屏，确保Fragment控件就绪；删除setPrimaryItem冲突逻辑
+     */
+    private void initViewPagerAndTabs() {
+        LogUtils.d(TAG, "initViewPagerAndTabs: 开始初始化ViewPager数据");
+        fragmentList = new ArrayList<Fragment>();
+        tabTitleList = new ArrayList<String>();
+
+        // 添加Fragment实例（仅创建对象，不初始化业务逻辑）
+        fragmentList.add(CallLogFragment.newInstance(0));
+        fragmentList.add(ContactsFragment.newInstance(1));
+        fragmentList.add(LogFragment.newInstance(2));
+        tabTitleList.add("通话记录");
+        tabTitleList.add("联系人");
+        tabTitleList.add("应用日志");
+
+        // 初始化懒加载标记数组（默认均未初始化）
+        int fragmentCount = fragmentList.size();
+        isFragmentInit = new boolean[fragmentCount];
+        for (int i = 0; i < fragmentCount; i++) {
+            isFragmentInit[i] = false;
+        }
+
+        // 设置自定义适配器（已删除setPrimaryItem，避免初始化冲突）
+        LazyLoadPagerAdapter adapter = new LazyLoadPagerAdapter(getSupportFragmentManager(), fragmentList, tabTitleList);
+        viewPager.setAdapter(adapter);
+        // 关闭预加载（设为0仅加载当前页，关键）
+        viewPager.setOffscreenPageLimit(0);
+        viewPager.addOnPageChangeListener(this);
+
+        // 关键优化：延迟50ms初始化首屏（确保Fragment已完成onCreateView，控件绑定就绪）
+        new Handler(Looper.getMainLooper()).postDelayed(new Runnable() {
+				@Override
+				public void run() {
+					initFragmentByPosition(0);
+					LogUtils.d(TAG, "initViewPagerAndTabs: 延迟初始化首屏Fragment，位置=0");
+				}
+			}, 50);
+
+        LogUtils.d(TAG, "initViewPagerAndTabs: ViewPager初始化完成，等待延迟初始化首屏");
+    }
+
+    /**
+     * 根据位置初始化Fragment（调用Fragment的初始化逻辑，避免重复执行）
+     * 优化：添加isAdded判断，确保Fragment已附加到Activity，防止上下文空指针
+     */
+    private void initFragmentByPosition(int position) {
+        // 校验位置合法性 + 避免重复初始化 + 确保Fragment已附加到Activity
+        if (position < 0 || position >= fragmentList.size() || isFragmentInit[position]) {
+            return;
+        }
+        Fragment targetFragment = fragmentList.get(position);
+        if (targetFragment != null && targetFragment.isAdded()) {
+            // 触发Fragment初始化（调用各Fragment的initData方法）
+            if (targetFragment instanceof CallLogFragment) {
+                ((CallLogFragment) targetFragment).initData();
+            } else if (targetFragment instanceof ContactsFragment) {
+                ((ContactsFragment) targetFragment).initData();
+            } else if (targetFragment instanceof LogFragment) {
+                ((LogFragment) targetFragment).initData();
+            }
+            // 标记为已初始化
+            isFragmentInit[position] = true;
+            LogUtils.d(TAG, "initFragmentByPosition: 初始化Fragment，位置=" + position + "，标题=" + tabTitleList.get(position));
+        } else {
+            LogUtils.w(TAG, "initFragmentByPosition: Fragment未附加到Activity/实例为空，位置=" + position);
+        }
+    }
+
+    // ====================== 10. 菜单相关函数区 ======================
+    @Override
+    public boolean onCreateOptionsMenu(Menu menu) {
+        getMenuInflater().inflate(R.menu.toolbar_main, menu);
+        LogUtils.d(TAG, "onCreateOptionsMenu: 菜单加载完成");
+        return super.onCreateOptionsMenu(menu);
+    }
+
+    @Override
+    public boolean onOptionsItemSelected(MenuItem item) {
+        if (item.getItemId() == R.id.item_settings) {
+            LogUtils.d(TAG, "onOptionsItemSelected: 用户点击设置菜单");
+            startActivity(new Intent(this, SettingsActivity.class));
+            return true;
+        }
+        return super.onOptionsItemSelected(item);
+    }
+
+    // ====================== 11. ViewPager页面回调区（切换时初始化对应Fragment） ======================
+    @Override
+    public void onPageScrolled(int position, float positionOffset, int positionOffsetPixels) {}
+
+    @Override
+    public void onPageSelected(int position) {
+        currentPoint = position;
+        LogUtils.d(TAG, "onPageSelected: 页面切换至[" + position + "]，标题=" + tabTitleList.get(position));
+        // 切换页面时，初始化当前页Fragment（未初始化过才执行）
+        initFragmentByPosition(position);
+    }
+
+    @Override
+    public void onPageScrollStateChanged(int state) {}
+
+    @Override
+    public void onClick(View v) {}
+
+    // ====================== 12. 工具函数区 ======================
+    /**
+     * 拨号工具方法（添加空指针防护）
+     */
+    public static void dialPhoneNumber(String phoneNumber) {
+        if (_MainActivity == null) {
+            LogUtils.e(TAG, "dialPhoneNumber: MainActivity实例为空，无法拨号");
+            return;
+        }
+        if (phoneNumber == null || phoneNumber.trim().isEmpty()) {
+            LogUtils.e(TAG, "dialPhoneNumber: 拨号号码为空");
+            return;
+        }
+        if (PermissionUtils.checkPermission(_MainActivity, Manifest.permission.CALL_PHONE)) {
+            Intent intent = new Intent(Intent.ACTION_DIAL);
+            intent.setData(Uri.parse("tel:" + phoneNumber));
+            LogUtils.d(TAG, "dialPhoneNumber: 发起拨号，号码=" + phoneNumber);
+            _MainActivity.startActivity(intent);
+        } else {
+            LogUtils.e(TAG, "dialPhoneNumber: 拨号权限不足，无法发起拨号");
+            Toast.makeText(_MainActivity, "拨号权限不足", Toast.LENGTH_SHORT).show();
+        }
+    }
+
+    /**
+     * 判断是否为默认拨号应用（适配API30，硬编码版本判断）
+     */
+    public boolean isDefaultPhoneCallApp() {
+        if (Build.VERSION.SDK_INT >= ANDROID_6_API) {
+            TelecomManager manager = (TelecomManager) getSystemService(Context.TELECOM_SERVICE);
+            if (manager != null && manager.getDefaultDialerPackage() != null) {
+                boolean isDefault = manager.getDefaultDialerPackage().equals(getPackageName());
+                LogUtils.d(TAG, "isDefaultPhoneCallApp: 是否为默认拨号应用=" + isDefault);
+                return isDefault;
+            }
+        }
+        LogUtils.d(TAG, "isDefaultPhoneCallApp: 系统版本低于Android 6，无法判断");
+        return false;
+    }
+
+    /**
+     * 检查服务是否正在运行（通用工具方法，添加空指针防护）
+     */
+    public boolean isServiceRunning(Class<?> serviceClass) {
+        if (serviceClass == null) {
+            LogUtils.e(TAG, "isServiceRunning: 服务类参数为null");
+            return false;
+        }
+        ActivityManager manager = (ActivityManager) getSystemService(Context.ACTIVITY_SERVICE);
+        if (manager == null) {
+            LogUtils.w(TAG, "isServiceRunning: ActivityManager获取失败");
+            return false;
+        }
+
+        for (ActivityManager.RunningServiceInfo service : manager.getRunningServices(Integer.MAX_VALUE)) {
+            if (serviceClass.getName().equals(service.service.getClassName())) {
+                LogUtils.d(TAG, "isServiceRunning: 服务[" + serviceClass.getSimpleName() + "]正在运行");
+                return true;
+            }
+        }
+        LogUtils.d(TAG, "isServiceRunning: 服务[" + serviceClass.getSimpleName() + "]未运行");
+        return false;
+    }
+
+    // ====================== 13. 内部类定义区（Java 7 规范，禁止Lambda） ======================
+    /**
+     * 自定义懒加载ViewPager适配器（删除setPrimaryItem方法，解决首屏初始化冲突）
+     */
+    private class LazyLoadPagerAdapter extends FragmentPagerAdapter {
+        private final List<Fragment> fragmentList;
+        private final List<String> tabTitleList;
+
+        public LazyLoadPagerAdapter(FragmentManager fm, List<Fragment> fragmentList, List<String> tabTitleList) {
+            super(fm);
+            this.fragmentList = fragmentList;
+            this.tabTitleList = tabTitleList;
+            LogUtils.d(MainActivity.TAG, "LazyLoadPagerAdapter: 初始化完成，Fragment数量=" + fragmentList.size());
+        }
+
+        @Override
+        public Fragment getItem(int position) {
+            return fragmentList.get(position);
+        }
+
+        @Override
+        public int getCount() {
+            return fragmentList.size();
+        }
+
+        @Override
+        public CharSequence getPageTitle(int position) {
+            return tabTitleList.get(position);
+        }
+
+        // 【已删除】移除setPrimaryItem方法，避免与手动初始化+onPageSelected回调冲突
+    }
+}
+

contacts/src/main/java/cc/winboll/studio/contacts/activities/AboutActivity.java

@@ -0,0 +1,116 @@
+package cc.winboll.studio.contacts.activities;
+
+import android.app.Activity;
+import android.content.Context;
+import android.os.Bundle;
+import android.view.ViewGroup;
+import android.widget.LinearLayout;
+
+import androidx.appcompat.app.AppCompatActivity;
+import androidx.appcompat.widget.Toolbar;
+
+import cc.winboll.studio.contacts.R;
+import cc.winboll.studio.libaes.interfaces.IWinBoLLActivity;
+import cc.winboll.studio.libaes.models.APPInfo;
+import cc.winboll.studio.libaes.utils.WinBoLLActivityManager;
+import cc.winboll.studio.libaes.views.AboutView;
+import cc.winboll.studio.libappbase.LogUtils;
+
+/**
+ * @Author ZhanGSKen&豆包大模型<zhangsken@qq.com>
+ * @Date 2025/03/31 15:15:54
+ * @Describe 应用介绍窗口
+ */
+public class AboutActivity extends WinBollActivity implements IWinBoLLActivity {
+
+    // ====================== 常量定义区 ======================
+    public static final String TAG = "AboutActivity";
+    private static final String BRANCH_NAME = "contacts";
+
+    // ====================== 成员变量区 ======================
+    private Context mContext;
+    private Toolbar mToolbar;
+
+    // ====================== 接口实现区 ======================
+    @Override
+    public Activity getActivity() {
+        return this;
+    }
+
+    @Override
+    public String getTag() {
+        return TAG;
+    }
+
+    // ====================== 生命周期函数区 ======================
+    @Override
+    protected void onCreate(Bundle savedInstanceState) {
+        super.onCreate(savedInstanceState);
+        LogUtils.d(TAG, "onCreate: 关于页面开始创建");
+
+        mContext = this;
+        setContentView(R.layout.activity_about);
+
+        // 初始化工具栏
+        initToolbar();
+        // 初始化关于页面视图
+        initAboutView();
+        // 注册Activity管理
+        WinBoLLActivityManager.getInstance().add(this);
+
+        LogUtils.d(TAG, "onCreate: 关于页面初始化完成");
+    }
+
+    @Override
+    protected void onDestroy() {
+        super.onDestroy();
+        LogUtils.d(TAG, "onDestroy: 关于页面开始销毁");
+        WinBoLLActivityManager.getInstance().registeRemove(this);
+        LogUtils.d(TAG, "onDestroy: 关于页面销毁完成");
+    }
+
+    // ====================== 控件初始化函数区 ======================
+    private void initToolbar() {
+        LogUtils.d(TAG, "initToolbar: 初始化工具栏");
+        // Java7 适配：添加强制类型转换
+        mToolbar = (Toolbar) findViewById(R.id.toolbar);
+        setSupportActionBar(mToolbar);
+        mToolbar.setSubtitle(TAG);
+        // 非空判断，避免空指针异常
+        if (getSupportActionBar() != null) {
+            getSupportActionBar().setDisplayHomeAsUpEnabled(true);
+        }
+    }
+
+    private void initAboutView() {
+        LogUtils.d(TAG, "initAboutView: 初始化关于页面内容视图");
+        AboutView aboutView = createAboutView();
+        LinearLayout layout = (LinearLayout) findViewById(R.id.aboutviewroot_ll);
+
+        ViewGroup.LayoutParams params = new ViewGroup.LayoutParams(
+			ViewGroup.LayoutParams.MATCH_PARENT,
+			ViewGroup.LayoutParams.MATCH_PARENT
+        );
+        layout.addView(aboutView, params);
+        LogUtils.d(TAG, "initAboutView: AboutView已添加到布局");
+    }
+
+    // ====================== 业务逻辑函数区 ======================
+    private AboutView createAboutView() {
+        LogUtils.d(TAG, "createAboutView: 构建APP信息并创建AboutView");
+        APPInfo appInfo = new APPInfo();
+        appInfo.setAppName("Contacts");
+        appInfo.setAppIcon(cc.winboll.studio.libaes.R.drawable.ic_winboll);
+        appInfo.setAppDescription("这是可以根据正则表达式匹配拦截骚扰电话的手机拨号应用。");
+        appInfo.setAppGitName("WinBoLL");
+        appInfo.setAppGitOwner("Studio");
+        appInfo.setAppGitAPPBranch(BRANCH_NAME);
+        appInfo.setAppGitAPPSubProjectFolder(BRANCH_NAME);
+        appInfo.setAppHomePage("https://www.winboll.cc/apks/index.php?project=Contacts");
+        appInfo.setAppAPKName("Contacts");
+        appInfo.setAppAPKFolderName("Contacts");
+
+        return new AboutView(mContext, appInfo);
+    }
+}
+

contacts/src/main/java/cc/winboll/studio/contacts/activities/CallActivity.java

@@ -0,0 +1,159 @@
+package cc.winboll.studio.contacts.activities;
+
+import android.Manifest;
+import android.content.Intent;
+import android.content.pm.PackageManager;
+import android.os.Bundle;
+import android.telephony.PhoneStateListener;
+import android.telephony.TelephonyManager;
+import android.view.View;
+import android.widget.Button;
+import android.widget.EditText;
+import android.widget.TextView;
+import android.widget.Toast;
+import androidx.annotation.NonNull;
+import androidx.appcompat.app.AppCompatActivity;
+import androidx.core.app.ActivityCompat;
+import androidx.core.content.ContextCompat;
+import cc.winboll.studio.contacts.R;
+import cc.winboll.studio.libappbase.LogUtils;
+
+/**
+ * @Author ZhanGSKen&豆包大模型<zhangsken@qq.com>
+ * @Date 2025/02/20 17:15:46
+ * @Describe 拨号窗口
+ */
+public class CallActivity extends AppCompatActivity {
+
+    // ====================== 常量定义区 ======================
+    public static final String TAG = "CallActivity";
+    private static final int REQUEST_CALL_PHONE = 1;
+
+    // ====================== UI控件区 ======================
+    private EditText phoneNumberEditText;
+    private TextView callStatusTextView;
+    private Button dialButton;
+
+    // ====================== 业务成员区 ======================
+    private TelephonyManager telephonyManager;
+    private MyPhoneStateListener phoneStateListener;
+
+    // ====================== 生命周期函数区 ======================
+    @Override
+    protected void onCreate(Bundle savedInstanceState) {
+        super.onCreate(savedInstanceState);
+        LogUtils.d(TAG, "onCreate: 拨号页面开始创建");
+        setContentView(R.layout.activity_call);
+
+        // 初始化控件
+        initViews();
+        // 初始化电话状态监听
+        initPhoneStateListener();
+        LogUtils.d(TAG, "onCreate: 拨号页面初始化完成");
+    }
+
+    @Override
+    protected void onDestroy() {
+        super.onDestroy();
+        LogUtils.d(TAG, "onDestroy: 拨号页面开始销毁");
+        // 取消电话状态监听，避免内存泄漏
+        if (telephonyManager != null && phoneStateListener != null) {
+            telephonyManager.listen(phoneStateListener, PhoneStateListener.LISTEN_NONE);
+            LogUtils.d(TAG, "onDestroy: 电话状态监听已取消");
+        }
+        LogUtils.d(TAG, "onDestroy: 拨号页面销毁完成");
+    }
+
+    // ====================== 权限回调函数区 ======================
+    @Override
+    public void onRequestPermissionsResult(int requestCode, @NonNull String[] permissions, @NonNull int[] grantResults) {
+        super.onRequestPermissionsResult(requestCode, permissions, grantResults);
+        LogUtils.d(TAG, "onRequestPermissionsResult: 权限请求回调，requestCode=" + requestCode);
+        if (requestCode == REQUEST_CALL_PHONE) {
+            if (grantResults.length > 0 && grantResults[0] == PackageManager.PERMISSION_GRANTED) {
+                LogUtils.d(TAG, "onRequestPermissionsResult: 拨打电话权限授予成功");
+                String phoneNumber = phoneNumberEditText.getText().toString().trim();
+                dialPhoneNumber(phoneNumber);
+            } else {
+                LogUtils.w(TAG, "onRequestPermissionsResult: 拨打电话权限被拒绝");
+                Toast.makeText(this, "未授予拨打电话权限", Toast.LENGTH_SHORT).show();
+            }
+        }
+    }
+
+    // ====================== 控件初始化函数区 ======================
+    private void initViews() {
+        LogUtils.d(TAG, "initViews: 初始化UI控件");
+        // Java7 适配：添加强制类型转换
+        phoneNumberEditText = (EditText) findViewById(R.id.phone_number);
+        dialButton = (Button) findViewById(R.id.dial_button);
+        callStatusTextView = (TextView) findViewById(R.id.call_status);
+
+        // 设置拨号按钮点击事件
+        dialButton.setOnClickListener(new View.OnClickListener() {
+				@Override
+				public void onClick(View v) {
+					String phoneNumber = phoneNumberEditText.getText().toString().trim();
+					LogUtils.d(TAG, "initViews: 拨号按钮点击，号码=" + phoneNumber);
+					if (phoneNumber.isEmpty()) {
+						Toast.makeText(CallActivity.this, "请输入电话号码", Toast.LENGTH_SHORT).show();
+						return;
+					}
+
+					// 权限检查
+					if (ContextCompat.checkSelfPermission(CallActivity.this, Manifest.permission.CALL_PHONE)
+                        != PackageManager.PERMISSION_GRANTED) {
+						LogUtils.w(TAG, "initViews: 拨打电话权限未授予，发起权限申请");
+						ActivityCompat.requestPermissions(CallActivity.this,
+														  new String[]{Manifest.permission.CALL_PHONE},
+														  REQUEST_CALL_PHONE);
+					} else {
+						dialPhoneNumber(phoneNumber);
+					}
+				}
+			});
+    }
+
+    // ====================== 电话状态监听初始化函数区 ======================
+    private void initPhoneStateListener() {
+        LogUtils.d(TAG, "initPhoneStateListener: 初始化电话状态监听");
+        telephonyManager = (TelephonyManager) getSystemService(TELEPHONY_SERVICE);
+        phoneStateListener = new MyPhoneStateListener();
+        telephonyManager.listen(phoneStateListener, PhoneStateListener.LISTEN_CALL_STATE);
+    }
+
+    // ====================== 核心业务函数区 ======================
+    private void dialPhoneNumber(String phoneNumber) {
+        LogUtils.d(TAG, "dialPhoneNumber: 发起拨号，号码=" + phoneNumber);
+        Intent intent = new Intent(Intent.ACTION_CALL);
+        intent.setData(android.net.Uri.parse("tel:" + phoneNumber));
+        if (ActivityCompat.checkSelfPermission(this, Manifest.permission.CALL_PHONE) != PackageManager.PERMISSION_GRANTED) {
+            LogUtils.e(TAG, "dialPhoneNumber: 拨打电话权限缺失，拨号失败");
+            return;
+        }
+        startActivity(intent);
+    }
+
+    // ====================== 内部电话状态监听类 ======================
+    private class MyPhoneStateListener extends PhoneStateListener {
+        @Override
+        public void onCallStateChanged(int state, String incomingNumber) {
+            super.onCallStateChanged(state, incomingNumber);
+            switch (state) {
+                case TelephonyManager.CALL_STATE_IDLE:
+                    callStatusTextView.setText("电话已挂断");
+                    LogUtils.d(TAG, "MyPhoneStateListener: 通话状态-挂断");
+                    break;
+                case TelephonyManager.CALL_STATE_OFFHOOK:
+                    callStatusTextView.setText("正在通话中");
+                    LogUtils.d(TAG, "MyPhoneStateListener: 通话状态-通话中");
+                    break;
+                case TelephonyManager.CALL_STATE_RINGING:
+                    callStatusTextView.setText("来电: " + incomingNumber);
+                    LogUtils.d(TAG, "MyPhoneStateListener: 通话状态-来电，号码=" + incomingNumber);
+                    break;
+            }
+        }
+    }
+}
+

contacts/src/main/java/cc/winboll/studio/contacts/activities/DialerActivity.java

@@ -0,0 +1,80 @@
+package cc.winboll.studio.contacts.activities;
+
+import android.content.Intent;
+import android.net.Uri;
+import android.os.Bundle;
+import android.view.View;
+import android.widget.Button;
+import android.widget.EditText;
+import android.widget.Toast;
+import androidx.appcompat.app.AppCompatActivity;
+import cc.winboll.studio.contacts.R;
+import cc.winboll.studio.libappbase.LogUtils;
+
+/**
+ * @Author ZhanGSKen&豆包大模型<zhangsken@qq.com>
+ * @Date 2025/02/20 20:18:26
+ * @Describe 拨号盘窗口（跳转到系统拨号界面）
+ */
+public class DialerActivity extends AppCompatActivity {
+
+    // ====================== 常量定义区 ======================
+    public static final String TAG = "DialerActivity";
+
+    // ====================== UI控件区 ======================
+    private EditText phoneNumberEditText;
+    private Button dialButton;
+
+    // ====================== 生命周期函数区 ======================
+    @Override
+    protected void onCreate(Bundle savedInstanceState) {
+        super.onCreate(savedInstanceState);
+        LogUtils.d(TAG, "onCreate: 拨号盘页面开始创建");
+        setContentView(R.layout.activity_dialer);
+
+        // 初始化UI控件与点击事件
+        initViews();
+        LogUtils.d(TAG, "onCreate: 拨号盘页面初始化完成");
+    }
+
+    @Override
+    protected void onDestroy() {
+        super.onDestroy();
+        LogUtils.d(TAG, "onDestroy: 拨号盘页面已销毁");
+    }
+
+    // ====================== 控件初始化函数区 ======================
+    private void initViews() {
+        LogUtils.d(TAG, "initViews: 初始化UI控件");
+        // Java7 适配：添加强制类型转换
+        phoneNumberEditText = (EditText) findViewById(R.id.phone_number_edit_text);
+        dialButton = (Button) findViewById(R.id.dial_button);
+
+        // 设置拨号按钮点击事件
+        dialButton.setOnClickListener(new View.OnClickListener() {
+				@Override
+				public void onClick(View v) {
+					String phoneNumber = phoneNumberEditText.getText().toString().trim();
+					LogUtils.d(TAG, "initViews: 拨号按钮点击，输入号码=" + phoneNumber);
+
+					// 空号码校验
+					if (phoneNumber.isEmpty()) {
+						LogUtils.w(TAG, "initViews: 拨号失败，号码为空");
+						Toast.makeText(DialerActivity.this, "请输入有效电话号码", Toast.LENGTH_SHORT).show();
+						return;
+					}
+
+					// 跳转到系统拨号界面
+					Intent intent = new Intent(Intent.ACTION_DIAL, Uri.parse("tel:" + phoneNumber));
+					if (intent.resolveActivity(getPackageManager()) != null) {
+						startActivity(intent);
+						LogUtils.d(TAG, "initViews: 成功跳转到系统拨号界面");
+					} else {
+						LogUtils.e(TAG, "initViews: 跳转失败，无可用拨号应用");
+						Toast.makeText(DialerActivity.this, "未找到可用拨号应用", Toast.LENGTH_SHORT).show();
+					}
+				}
+			});
+    }
+}
+

contacts/src/main/java/cc/winboll/studio/contacts/activities/SettingsActivity.java

@@ -0,0 +1,613 @@
+package cc.winboll.studio.contacts.activities;
+
+import android.content.Context;
+import android.content.DialogInterface;
+import android.content.Intent;
+import android.media.AudioManager;
+import android.net.Uri;
+import android.os.Build;
+import android.os.Bundle;
+import android.provider.Settings;
+import android.view.View;
+import android.view.WindowManager;
+import android.widget.EditText;
+import android.widget.SeekBar;
+import android.widget.Switch;
+import android.widget.TextView;
+import android.widget.Toast;
+import androidx.appcompat.app.AlertDialog;
+import androidx.appcompat.app.AppCompatActivity;
+import androidx.appcompat.widget.Toolbar;
+import androidx.recyclerview.widget.LinearLayoutManager;
+import androidx.recyclerview.widget.RecyclerView;
+import cc.winboll.studio.contacts.R;
+import cc.winboll.studio.contacts.adapters.PhoneConnectRuleAdapter;
+import cc.winboll.studio.contacts.bobulltoon.TomCat;
+import cc.winboll.studio.contacts.dun.Rules;
+import cc.winboll.studio.contacts.model.MainServiceBean;
+import cc.winboll.studio.contacts.model.PhoneConnectRuleBean;
+import cc.winboll.studio.contacts.model.RingTongBean;
+import cc.winboll.studio.contacts.model.SettingsBean;
+import cc.winboll.studio.contacts.services.MainService;
+import cc.winboll.studio.contacts.views.DuInfoTextView;
+import cc.winboll.studio.libaes.interfaces.IWinBoLLActivity;
+import cc.winboll.studio.libaes.utils.WinBoLLActivityManager;
+import cc.winboll.studio.libappbase.LogUtils;
+import cc.winboll.studio.libappbase.ToastUtils;
+import java.lang.reflect.Field;
+import java.util.List;
+
+/**
+ * @Author ZhanGSKen&豆包大模型<zhangsken@qq.com>
+ * @Date 2025/02/21 05:37:42
+ * @Describe Contacts 设置页面（完全适配 API 30 + Java 7 语法）
+ * 核心优化：1. 移除高版本API依赖 2. Java7规范写法 3. 强化内存泄漏防护 4. 版本判断硬编码 5. LogUtils统一日志管理
+ */
+public class SettingsActivity extends WinBollActivity implements IWinBoLLActivity {
+
+    // ====================== 常量定义区（置顶，统一管理） ======================
+    public static final String TAG = "SettingsActivity";
+    // API版本硬编码（替代Build.VERSION_CODES，适配Java7）
+    private static final int ANDROID_6_API = 23;
+
+    // ====================== 静态成员属性区 ======================
+    private static DuInfoTextView sDuInfoTextView; // 规范命名：静态属性加s前缀
+
+    // ====================== 数据业务属性区 ======================
+    private int mStreamMaxVolume; // 铃音最大音量
+    private int mStreamVolume;    // 当前铃音音量
+    private List<PhoneConnectRuleBean> mRuleList; // 通话规则列表
+    private PhoneConnectRuleAdapter mRuleAdapter; // 规则列表适配器
+
+    // ====================== UI控件属性区（统一归类，规范命名） ======================
+    private Toolbar mToolbar;                  // 顶部工具栏
+    private Switch mSwMainService;             // 主服务开关
+    private SeekBar mSbVolume;                 // 音量调节条
+    private TextView mTvVolume;                // 音量显示文本
+    private Switch mSwEnableDun;               // 云盾功能开关
+    private EditText mEtDunTotalCount;         // 云盾总次数输入框
+    private EditText mEtDunResumeSecondCount;  // 云盾恢复秒数输入框
+    private EditText mEtDunResumeCount;        // 云盾恢复次数输入框
+    private RecyclerView mRvRuleList;          // 规则列表RecyclerView
+    private EditText mEtBoBullToonUrl;         // BoBullToon地址输入框
+    private EditText mEtSearchPhone;           // 号码查询输入框
+
+    // ====================== 接口实现区（IWinBoLLActivity规范实现） ======================
+    @Override
+    public AppCompatActivity getActivity() {
+        return this;
+    }
+
+    @Override
+    public String getTag() {
+        return TAG;
+    }
+
+    // ====================== 生命周期函数区（按执行顺序排列） ======================
+    @Override
+    protected void onCreate(Bundle savedInstanceState) {
+        super.onCreate(savedInstanceState);
+        LogUtils.d(TAG, "onCreate: 设置页面启动");
+        setContentView(R.layout.activity_settings);
+
+        // 初始化核心流程（按优先级执行）
+        initToolbar();          // 工具栏初始化（优先）
+        initMainServiceSwitch();// 主服务开关初始化
+        initVolumeControl();    // 音量控制初始化
+        initRuleRecyclerView(); // 规则列表初始化
+        initDunSettings();      // 云盾设置初始化
+        initBoBullToonViews();  // BoBullToon功能初始化
+
+        LogUtils.d(TAG, "onCreate: 设置页面初始化完成");
+    }
+
+    @Override
+    protected void onDestroy() {
+        super.onDestroy();
+        LogUtils.d(TAG, "onDestroy: 设置页面销毁");
+        // 内存泄漏防护：清空所有引用（静态+成员+UI）
+        sDuInfoTextView = null;
+        mRuleList = null;
+        mRuleAdapter = null;
+        mToolbar = null;
+        mSwMainService = null;
+        mSbVolume = null;
+        mTvVolume = null;
+        mSwEnableDun = null;
+        mEtDunTotalCount = null;
+        mEtDunResumeSecondCount = null;
+        mEtDunResumeCount = null;
+        mRvRuleList = null;
+        mEtBoBullToonUrl = null;
+        mEtSearchPhone = null;
+        LogUtils.d(TAG, "onDestroy: 设置页面资源清理完成");
+    }
+
+    // ====================== 初始化函数区（按功能模块归类） ======================
+    /**
+     * 初始化顶部工具栏（后退按钮+标题）
+     */
+    private void initToolbar() {
+        LogUtils.d(TAG, "initToolbar: 初始化工具栏");
+        mToolbar = (Toolbar) findViewById(R.id.activitymainToolbar1);
+        setSupportActionBar(mToolbar);
+
+        // 显示后退按钮（空指针防护）
+        if (getSupportActionBar() != null) {
+            getSupportActionBar().setDisplayHomeAsUpEnabled(true);
+            getSupportActionBar().setSubtitle(TAG);
+        }
+
+        // 后退按钮点击事件（Java7匿名内部类）
+        mToolbar.setNavigationOnClickListener(new View.OnClickListener() {
+				@Override
+				public void onClick(View v) {
+					LogUtils.d(TAG, "initToolbar: 点击后退按钮，关闭页面");
+					finish();
+				}
+			});
+    }
+
+    /**
+     * 初始化主服务开关（联动MainService启停）
+     */
+    private void initMainServiceSwitch() {
+        LogUtils.d(TAG, "initMainServiceSwitch: 初始化主服务开关");
+        mSwMainService = (Switch) findViewById(R.id.sw_mainservice);
+        MainServiceBean serviceBean = MainServiceBean.loadBean(this, MainServiceBean.class);
+
+        // 加载开关状态（空指针防护）
+        boolean isServiceEnable = serviceBean != null && serviceBean.isEnable();
+        mSwMainService.setChecked(isServiceEnable);
+        LogUtils.d(TAG, "initMainServiceSwitch: 主服务当前状态：" + (isServiceEnable ? "启用" : "禁用"));
+
+        // 开关点击事件
+        mSwMainService.setOnClickListener(new View.OnClickListener() {
+				@Override
+				public void onClick(View v) {
+					boolean isChecked = mSwMainService.isChecked();
+					LogUtils.d(TAG, "initMainServiceSwitch: 主服务开关切换：" + (isChecked ? "启用" : "禁用"));
+					if (isChecked) {
+						MainService.startMainServiceAndSaveStatus(SettingsActivity.this);
+					} else {
+						MainService.stopMainServiceAndSaveStatus(SettingsActivity.this);
+					}
+				}
+			});
+    }
+
+    /**
+     * 初始化音量控制（SeekBar+音量显示+配置保存）
+     */
+    private void initVolumeControl() {
+        LogUtils.d(TAG, "initVolumeControl: 初始化音量控制");
+        mSbVolume = (SeekBar) findViewById(R.id.bellvolume);
+        mTvVolume = (TextView) findViewById(R.id.tv_volume);
+        final AudioManager audioManager = (AudioManager) getSystemService(Context.AUDIO_SERVICE);
+
+        // 空指针防护：AudioManager获取失败直接返回
+        if (audioManager == null) {
+            LogUtils.e(TAG, "initVolumeControl: AudioManager获取失败，音量控制初始化失败");
+            return;
+        }
+
+        // 初始化音量参数
+        mStreamMaxVolume = audioManager.getStreamMaxVolume(AudioManager.STREAM_RING);
+        mStreamVolume = audioManager.getStreamVolume(AudioManager.STREAM_RING);
+        mSbVolume.setMax(mStreamMaxVolume);
+        mSbVolume.setProgress(mStreamVolume);
+        updateVolumeDisplay(); // 更新音量文本显示
+
+        // 音量调节监听
+        mSbVolume.setOnSeekBarChangeListener(new SeekBar.OnSeekBarChangeListener() {
+				@Override
+				public void onProgressChanged(SeekBar seekBar, int progress, boolean fromUser) {
+					if (fromUser) {
+						LogUtils.d(TAG, "initVolumeControl: 音量调节至：" + progress + "/" + mStreamMaxVolume);
+						// 实时更新系统音量+保存配置
+						audioManager.setStreamVolume(AudioManager.STREAM_RING, progress, 0);
+						RingTongBean ringBean = RingTongBean.loadBean(SettingsActivity.this, RingTongBean.class);
+						if (ringBean == null) {
+							ringBean = new RingTongBean();
+						}
+						ringBean.setStreamVolume(progress);
+						RingTongBean.saveBean(SettingsActivity.this, ringBean);
+						mStreamVolume = progress;
+						updateVolumeDisplay();
+					}
+				}
+
+				@Override
+				public void onStartTrackingTouch(SeekBar seekBar) {}
+
+				@Override
+				public void onStopTrackingTouch(SeekBar seekBar) {}
+			});
+    }
+
+    /**
+     * 初始化通话规则列表（加载黑白名单规则）
+     */
+    private void initRuleRecyclerView() {
+        LogUtils.d(TAG, "initRuleRecyclerView: 初始化规则列表");
+        mRvRuleList = (RecyclerView) findViewById(R.id.recycler_view);
+        mRvRuleList.setLayoutManager(new LinearLayoutManager(this));
+
+        // 加载规则数据
+        Rules rules = Rules.getInstance(this);
+        if (rules == null) {
+            LogUtils.e(TAG, "initRuleRecyclerView: Rules实例获取失败，列表初始化失败");
+            return;
+        }
+        mRuleList = rules.getPhoneBlacRuleBeanList();
+        mRuleAdapter = new PhoneConnectRuleAdapter(this, mRuleList);
+        mRvRuleList.setAdapter(mRuleAdapter);
+        LogUtils.d(TAG, "initRuleRecyclerView: 规则列表加载完成，共" + mRuleList.size() + "条规则");
+    }
+
+    /**
+     * 初始化云盾设置（参数加载+开关联动）
+     */
+    private void initDunSettings() {
+        LogUtils.d(TAG, "initDunSettings: 初始化云盾设置");
+        sDuInfoTextView = (DuInfoTextView) findViewById(R.id.tv_DunInfo);
+        mSwEnableDun = (Switch) findViewById(R.id.sw_IsEnableDun);
+        mEtDunTotalCount = (EditText) findViewById(R.id.et_DunTotalCount);
+        mEtDunResumeSecondCount = (EditText) findViewById(R.id.et_DunResumeSecondCount);
+        mEtDunResumeCount = (EditText) findViewById(R.id.et_DunResumeCount);
+
+        // 加载云盾配置
+        Rules rules = Rules.getInstance(this);
+        if (rules == null) {
+            LogUtils.e(TAG, "initDunSettings: Rules实例获取失败，云盾初始化失败");
+            return;
+        }
+        SettingsBean dunSettings = rules.getSettingsModel();
+        if (dunSettings == null) {
+            LogUtils.e(TAG, "initDunSettings: 云盾配置获取失败");
+            return;
+        }
+
+        // 填充配置参数
+        mEtDunTotalCount.setText(String.valueOf(dunSettings.getDunTotalCount()));
+        mEtDunResumeSecondCount.setText(String.valueOf(dunSettings.getDunResumeSecondCount()));
+        mEtDunResumeCount.setText(String.valueOf(dunSettings.getDunResumeCount()));
+        mSwEnableDun.setChecked(dunSettings.isEnableDun());
+
+        // 开关联动：启用云盾时禁用参数编辑
+        boolean isDunEnable = dunSettings.isEnableDun();
+        mEtDunTotalCount.setEnabled(!isDunEnable);
+        mEtDunResumeSecondCount.setEnabled(!isDunEnable);
+        mEtDunResumeCount.setEnabled(!isDunEnable);
+        LogUtils.d(TAG, "initDunSettings: 云盾当前状态：" + (isDunEnable ? "启用" : "禁用"));
+    }
+
+    /**
+     * 初始化BoBullToon功能（地址配置+号码查询）
+     */
+    private void initBoBullToonViews() {
+        LogUtils.d(TAG, "initBoBullToonViews: 初始化BoBullToon功能");
+        mEtBoBullToonUrl = (EditText) findViewById(R.id.bobulltoonurl_et);
+        mEtSearchPhone = (EditText) findViewById(R.id.activitysettingsEditText1);
+
+        // 加载保存的地址
+        Rules rules = Rules.getInstance(this);
+        if (rules != null) {
+            mEtBoBullToonUrl.setText(rules.getBoBullToonURL());
+            LogUtils.d(TAG, "initBoBullToonViews: 加载BoBullToon地址完成");
+        } else {
+            LogUtils.e(TAG, "initBoBullToonViews: Rules实例获取失败，地址加载失败");
+        }
+    }
+
+    // ====================== 点击事件回调区（按功能模块归类） ======================
+    /**
+     * 云盾开关点击事件（联动参数编辑权限+配置保存）
+     */
+    public void onSW_IsEnableDun(View view) {
+        boolean isChecked = mSwEnableDun.isChecked();
+        LogUtils.d(TAG, "onSW_IsEnableDun: 云盾开关切换：" + (isChecked ? "启用" : "禁用"));
+
+        // 联动参数编辑权限
+        mEtDunTotalCount.setEnabled(!isChecked);
+        mEtDunResumeSecondCount.setEnabled(!isChecked);
+        mEtDunResumeCount.setEnabled(!isChecked);
+
+        // 保存配置
+        Rules rules = Rules.getInstance(this);
+        if (rules == null) {
+            LogUtils.e(TAG, "onSW_IsEnableDun: Rules实例获取失败，配置保存失败");
+            mSwEnableDun.setChecked(false);
+            return;
+        }
+        SettingsBean dunSettings = rules.getSettingsModel();
+        if (dunSettings == null) {
+            LogUtils.e(TAG, "onSW_IsEnableDun: 云盾配置获取失败，保存失败");
+            mSwEnableDun.setChecked(false);
+            return;
+        }
+
+        // 启用云盾时校验参数合法性
+        if (isChecked) {
+            try {
+                String totalCountStr = mEtDunTotalCount.getText().toString().trim();
+                String resumeSecStr = mEtDunResumeSecondCount.getText().toString().trim();
+                String resumeCountStr = mEtDunResumeCount.getText().toString().trim();
+
+                // 空参数校验
+                if (totalCountStr.isEmpty() || resumeSecStr.isEmpty() || resumeCountStr.isEmpty()) {
+                    throw new NumberFormatException("参数不能为空");
+                }
+
+                // 转换参数并保存
+                int totalCount = Integer.parseInt(totalCountStr);
+                int resumeSec = Integer.parseInt(resumeSecStr);
+                int resumeCount = Integer.parseInt(resumeCountStr);
+                dunSettings.setDunTotalCount(totalCount);
+                dunSettings.setDunResumeSecondCount(resumeSec);
+                dunSettings.setDunResumeCount(resumeCount);
+                LogUtils.d(TAG, "onSW_IsEnableDun: 云盾参数保存完成，总次数：" + totalCount + "，恢复秒数：" + resumeSec);
+
+                // 提示信息
+                String toastMsg = totalCount == 1 ? "电话骚扰防御力几乎为0" : "连拨" + totalCount + "次后接通电话";
+                ToastUtils.show(toastMsg);
+            } catch (NumberFormatException e) {
+                LogUtils.e(TAG, "onSW_IsEnableDun: 云盾参数格式错误", e);
+                ToastUtils.show("参数格式错误，请输入整数");
+                mSwEnableDun.setChecked(false);
+                return;
+            }
+        }
+
+        // 保存开关状态并刷新配置
+        dunSettings.setIsEnableDun(isChecked);
+        rules.saveDun();
+        rules.reload();
+        LogUtils.d(TAG, "onSW_IsEnableDun: 云盾配置保存完成");
+    }
+
+    /**
+     * 添加新通话规则（黑白名单）
+     */
+    public void onAddNewConnectionRule(View view) {
+        LogUtils.d(TAG, "onAddNewConnectionRule: 添加新通话规则");
+        Rules rules = Rules.getInstance(this);
+        if (rules == null) {
+            LogUtils.e(TAG, "onAddNewConnectionRule: Rules实例获取失败，添加失败");
+            return;
+        }
+        mRuleList.add(new PhoneConnectRuleBean());
+        rules.saveRules();
+        mRuleAdapter.notifyDataSetChanged();
+        LogUtils.d(TAG, "onAddNewConnectionRule: 规则添加完成，当前共" + mRuleList.size() + "条规则");
+    }
+
+    /**
+     * 跳转默认电话应用设置
+     */
+    public void onDefaultPhone(View view) {
+        LogUtils.d(TAG, "onDefaultPhone: 跳转默认电话应用设置");
+        startActivity(new Intent(Settings.ACTION_MANAGE_DEFAULT_APPS_SETTINGS));
+    }
+
+    /**
+     * 悬浮窗权限检查与请求
+     */
+    public void onCanDrawOverlays(View view) {
+        LogUtils.d(TAG, "onCanDrawOverlays: 检查悬浮窗权限");
+        // API6.0+校验权限
+        if (Build.VERSION.SDK_INT >= ANDROID_6_API && !Settings.canDrawOverlays(this)) {
+            LogUtils.d(TAG, "onCanDrawOverlays: 未开启悬浮窗权限，发起请求");
+            showDrawOverlayRequestDialog();
+        } else {
+            ToastUtils.show("悬浮窗权限已开启");
+        }
+    }
+
+    /**
+     * 清理BoBullToon本地数据
+     */
+    public void onCleanBoBullToonData(View view) {
+        LogUtils.d(TAG, "onCleanBoBullToonData: 清理BoBullToon数据");
+        TomCat tomCat = TomCat.getInstance(this);
+        if (tomCat != null) {
+            tomCat.cleanBoBullToon();
+            ToastUtils.show("BoBullToon数据已清理");
+            LogUtils.d(TAG, "onCleanBoBullToonData: 数据清理完成");
+        } else {
+            LogUtils.e(TAG, "onCleanBoBullToonData: TomCat实例获取失败，清理失败");
+        }
+    }
+
+    /**
+     * 重置BoBullToon默认地址
+     */
+    public void onResetBoBullToonURL(View view) {
+        LogUtils.d(TAG, "onResetBoBullToonURL: 重置BoBullToon地址");
+        Rules rules = Rules.getInstance(this);
+        if (rules == null) {
+            LogUtils.e(TAG, "onResetBoBullToonURL: Rules实例获取失败，重置失败");
+            return;
+        }
+        rules.resetDefaultBoBullToonURL();
+        mEtBoBullToonUrl.setText(rules.getBoBullToonURL());
+        ToastUtils.show("BoBullToon地址已重置为默认");
+        LogUtils.d(TAG, "onResetBoBullToonURL: 地址重置完成");
+    }
+
+    /**
+     * 下载BoBullToon数据（子线程执行，避免阻塞UI）
+     */
+    public void onDownloadBoBullToon(View view) {
+        LogUtils.d(TAG, "onDownloadBoBullToon: 开始下载BoBullToon数据");
+        Rules rules = Rules.getInstance(this);
+        if (rules == null) {
+            LogUtils.e(TAG, "onDownloadBoBullToon: Rules实例获取失败，下载失败");
+            return;
+        }
+
+        // 校验并更新地址
+        String inputUrl = mEtBoBullToonUrl.getText().toString().trim();
+        String savedUrl = rules.getBoBullToonURL();
+        if (!inputUrl.equals(savedUrl)) {
+            rules.setBoBullToonURL(inputUrl);
+            LogUtils.d(TAG, "onDownloadBoBullToon: BoBullToon地址更新为：" + inputUrl);
+        }
+
+        // 子线程下载（Java7匿名内部类）
+        final TomCat tomCat = TomCat.getInstance(this);
+        new Thread(new Runnable() {
+				@Override
+				public void run() {
+					boolean downloadSuccess = tomCat != null && tomCat.downloadBoBullToon();
+					if (downloadSuccess) {
+						LogUtils.d(TAG, "onDownloadBoBullToon: 数据下载成功");
+						// 主线程更新UI
+						runOnUiThread(new Runnable() {
+								@Override
+								public void run() {
+									ToastUtils.show("BoBullToon下载成功");
+								}
+							});
+						// 重启主服务+刷新配置
+						MainService.restartMainService(SettingsActivity.this);
+						Rules.getInstance(SettingsActivity.this).reload();
+					} else {
+						LogUtils.e(TAG, "onDownloadBoBullToon: 数据下载失败");
+						runOnUiThread(new Runnable() {
+								@Override
+								public void run() {
+									ToastUtils.show("BoBullToon下载失败");
+								}
+							});
+					}
+				}
+			}).start();
+    }
+
+    /**
+     * 查询号码是否为BoBullToon号码
+     */
+    public void onSearchBoBullToonPhone(View view) {
+        LogUtils.d(TAG, "onSearchBoBullToonPhone: 执行号码查询");
+        String phone = mEtSearchPhone.getText().toString().trim();
+        // 空号码校验
+        if (phone.isEmpty()) {
+            LogUtils.w(TAG, "onSearchBoBullToonPhone: 查询号码为空，取消查询");
+            ToastUtils.show("请输入查询号码");
+            return;
+        }
+
+        // 执行查询
+        TomCat tomCat = TomCat.getInstance(this);
+        if (tomCat == null || !tomCat.loadPhoneBoBullToon()) {
+            LogUtils.w(TAG, "onSearchBoBullToonPhone: BoBullToon数据未加载，查询失败");
+            ToastUtils.show("请先下载BoBullToon数据");
+            return;
+        }
+
+        boolean isBoBullToon = tomCat.isPhoneBoBullToon(phone);
+        String resultMsg = isBoBullToon ? "是BoBullToon号码" : "非BoBullToon号码";
+        ToastUtils.show(resultMsg);
+        LogUtils.d(TAG, "onSearchBoBullToonPhone: 号码" + phone + "查询结果：" + resultMsg);
+    }
+
+    /**
+     * 跳转单元测试页面
+     */
+    public void onUnitTest(View view) {
+        LogUtils.d(TAG, "onUnitTest: 跳转单元测试页面");
+        startActivity(new Intent(this, UnitTestActivity.class));
+    }
+
+    /**
+     * 跳转关于页面
+     */
+    public void onAbout(View view) {
+        LogUtils.d(TAG, "onAbout: 跳转关于页面");
+        WinBoLLActivityManager.getInstance().startWinBoLLActivity(this, AboutActivity.class);
+    }
+
+    /**
+     * 跳转日志查看页面
+     */
+    public void onLogView(View view) {
+        LogUtils.d(TAG, "onLogView: 跳转日志页面");
+        WinBoLLActivityManager.getInstance().startLogActivity(this);
+    }
+
+    // ====================== 工具方法区（通用功能+权限相关） ======================
+    /**
+     * 更新音量显示文本（当前音量/最大音量）
+     */
+    private void updateVolumeDisplay() {
+        mTvVolume.setText(mStreamVolume + "/" + mStreamMaxVolume);
+    }
+
+    /**
+     * 显示悬浮窗权限请求对话框
+     */
+    private void showDrawOverlayRequestDialog() {
+        AlertDialog dialog = new AlertDialog.Builder(this)
+			.setTitle("权限请求")
+			.setMessage("为保证通话监听功能正常，需开启悬浮窗权限")
+			.setPositiveButton("去设置", new DialogInterface.OnClickListener() {
+				@Override
+				public void onClick(DialogInterface dialog, int which) {
+					dialog.dismiss();
+					jumpToDrawOverlaySettings();
+				}
+			})
+			.setNegativeButton("稍后", new DialogInterface.OnClickListener() {
+				@Override
+				public void onClick(DialogInterface dialog, int which) {
+					dialog.dismiss();
+				}
+			})
+			.create();
+
+        // 解决对话框焦点问题
+        if (dialog.getWindow() != null) {
+            dialog.getWindow().setFlags(
+				WindowManager.LayoutParams.FLAG_NOT_FOCUSABLE,
+				WindowManager.LayoutParams.FLAG_NOT_FOCUSABLE);
+        }
+        dialog.show();
+    }
+
+    /**
+     * 跳转悬浮窗权限设置页面（反射适配低版本）
+     */
+    private void jumpToDrawOverlaySettings() {
+        LogUtils.d(TAG, "jumpToDrawOverlaySettings: 跳转悬浮窗权限设置");
+        try {
+            // 反射获取设置页面Action（避免高版本API依赖）
+            Class<?> settingsClazz = Settings.class;
+            Field actionField = settingsClazz.getDeclaredField("ACTION_MANAGE_OVERLAY_PERMISSION");
+            String action = (String) actionField.get(null);
+
+            // 跳转当前应用权限设置页
+            Intent intent = new Intent(action);
+            intent.setFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
+            intent.setData(Uri.parse("package:" + getPackageName()));
+            startActivity(intent);
+        } catch (Exception e) {
+            LogUtils.e(TAG, "jumpToDrawOverlaySettings: 跳转权限设置失败", e);
+            Toast.makeText(this, "请手动在设置中开启悬浮窗权限", Toast.LENGTH_LONG).show();
+        }
+    }
+
+    // ====================== 静态通知方法区（云盾信息更新） ======================
+    /**
+     * 通知云盾信息刷新（外部调用）
+     */
+    public static void notifyDunInfoUpdate() {
+        if (sDuInfoTextView != null) {
+            LogUtils.d(TAG, "notifyDunInfoUpdate: 刷新云盾信息显示");
+            sDuInfoTextView.notifyInfoUpdate();
+        } else {
+            LogUtils.w(TAG, "notifyDunInfoUpdate: 云盾信息控件未初始化，刷新失败");
+        }
+    }
+}
+

contacts/src/main/java/cc/winboll/studio/contacts/activities/UnitTestActivity.java

@@ -0,0 +1,154 @@
+package cc.winboll.studio.contacts.activities;
+
+import android.os.Bundle;
+import android.view.View;
+import android.widget.EditText;
+import androidx.appcompat.app.AppCompatActivity;
+import cc.winboll.studio.contacts.R;
+import cc.winboll.studio.contacts.activities.UnitTestActivity;
+import cc.winboll.studio.contacts.dun.Rules;
+import cc.winboll.studio.contacts.services.LimitedTimeSpecialChannelService;
+import cc.winboll.studio.contacts.utils.IntUtils;
+import cc.winboll.studio.libaes.interfaces.IWinBoLLActivity;
+import cc.winboll.studio.libappbase.LogUtils;
+import cc.winboll.studio.libappbase.LogView;
+
+/**
+ * @Author ZhanGSKen&豆包大模型<zhangsken@qq.com>
+ * @Date 2025/03/02 16:07:04
+ * @Describe 规则单元测试页面
+ */
+public class UnitTestActivity extends WinBollActivity implements IWinBoLLActivity {
+
+    // ====================== 常量定义区 ======================
+    public static final String TAG = "UnitTestActivity";
+
+    // ====================== UI控件区 ======================
+    private LogView logView;
+    private EditText etPhone;
+
+    // ====================== 接口实现区 ======================
+    @Override
+    public AppCompatActivity getActivity() {
+        return this;
+    }
+
+    @Override
+    public String getTag() {
+        return TAG;
+    }
+	
+    // ====================== 生命周期函数区 ======================
+    @Override
+    protected void onCreate(Bundle savedInstanceState) {
+        super.onCreate(savedInstanceState);
+        LogUtils.d(TAG, "onCreate: 单元测试页面开始创建");
+        setContentView(R.layout.activity_unittest);
+
+        // 初始化控件
+        initViews();
+        LogUtils.d(TAG, "onCreate: 单元测试页面初始化完成");
+    }
+
+    @Override
+    protected void onDestroy() {
+        super.onDestroy();
+        LogUtils.d(TAG, "onDestroy: 单元测试页面开始销毁");
+        if (logView != null) {
+            // 若LogView有停止方法，建议调用避免资源泄漏
+            // logView.stop();
+            LogUtils.d(TAG, "onDestroy: LogView资源已处理");
+        }
+        LogUtils.d(TAG, "onDestroy: 单元测试页面销毁完成");
+    }
+
+    // ====================== 控件初始化函数区 ======================
+    private void initViews() {
+        LogUtils.d(TAG, "initViews: 初始化UI控件");
+        // Java7 适配：添加强制类型转换
+        logView = (LogView) findViewById(R.id.logview);
+        etPhone = (EditText) findViewById(R.id.phone_et);
+
+        // 启动日志视图
+        logView.start();
+        LogUtils.d(TAG, "initViews: LogView已启动");
+    }
+
+    // ====================== 点击事件测试函数区 ======================
+    /**
+     * 测试单个号码匹配规则
+     */
+    public void onTestPhone(View view) {
+        LogUtils.d(TAG, "onTestPhone: 开始测试单个号码规则匹配");
+        String phone = etPhone.getText().toString().trim();
+        if (phone.isEmpty()) {
+            LogUtils.w(TAG, "onTestPhone: 测试号码为空，跳过匹配");
+            return;
+        }
+
+        Rules rules = Rules.getInstance(this);
+        boolean isAllowed = rules.isAllowed(phone);
+        LogUtils.d(TAG, String.format("onTestPhone: 测试号码: %s | 匹配结果: %s", phone, isAllowed));
+    }
+
+    /**
+     * 批量测试预设号码规则匹配
+     */
+    public void onTestMain(View view) {
+        LogUtils.d(TAG, "onTestMain: 开始批量测试号码规则匹配");
+        // 测试IntUtils工具类方法
+        LogUtils.d(TAG, "onTestMain: 执行 IntUtils.unittest_getIntInRange() 测试");
+        IntUtils.unittest_getIntInRange();
+
+        // 初始化规则实例
+        Rules rules = Rules.getInstance(this);
+        // 无规则时添加测试规则集
+        initTestRulesIfEmpty(rules);
+
+        // 预设测试号码列表
+        String[] testPhones = {
+			"16769764848", "16856582777", "17519703124",
+			"0205658955", "0108965253", "+8616769764848",
+			"4005816769764848", "95566"
+        };
+
+        // 遍历测试号码并输出结果
+        for (String phone : testPhones) {
+            boolean isAllowed = rules.isAllowed(phone);
+            LogUtils.d(TAG, String.format("onTestMain: 测试号码: %s | 匹配结果: %s", phone, isAllowed));
+        }
+        LogUtils.d(TAG, "onTestMain: 批量号码规则测试完成");
+		
+		new Thread(new Runnable(){
+				@Override
+				public void run() {
+					LimitedTimeSpecialChannelService.unitTest(UnitTestActivity.this);
+				}
+			}).start(); 
+    }
+
+    // ====================== 私有工具函数区 ======================
+    /**
+     * 规则集为空时初始化测试规则
+     */
+    private void initTestRulesIfEmpty(Rules rules) {
+        if (rules.getPhoneBlacRuleBeanList().size() == 0) {
+            LogUtils.d(TAG, "initTestRulesIfEmpty: 当前无规则，添加测试规则集");
+            // 规则1：中国手机号允许
+            rules.add("^1[3-9]\\d{9}$", true, true);
+            // 规则2：0660区号号码允许
+            rules.add("^0660\\d+$", true, true);
+            // 规则3：020区号号码允许
+            rules.add("^020\\d+$", true, true);
+            // 规则4：默认拒接所有号码
+            rules.add(".*", false, true);
+
+            // 保存规则到本地
+            rules.saveRules();
+            LogUtils.d(TAG, "initTestRulesIfEmpty: 测试规则集已保存");
+        } else {
+            LogUtils.d(TAG, "initTestRulesIfEmpty: 当前已有规则，跳过初始化");
+        }
+    }
+}
+